A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures

Levy, 2003, Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives, CIRP Ann. Manuf. Technol., 52, 589, 10.1016/S0007-8506(07)60206-6

Yan, 1996, A review of rapid prototyping technologies and systems, Comput. Aided Des., 28, 307, 10.1016/0010-4485(95)00035-6

Tari, 1998, Rapid prototyping of composite parts using resin transfer molding and laminated object manufacturing, Compos. Part A: Appl. Sci. Manuf., 29, 651, 10.1016/S1359-835X(97)00113-9

Zein, 2002, Fused deposition modeling of novel scaffold architectures for tissue engineering applications, Biomaterials, 23, 1169, 10.1016/S0142-9612(01)00232-0

Sachs, 1990, Three-dimensional printing: rapid tooling and prototypes directly from a CAD Model, CIRP Ann. Manuf. Technol., 39, 201, 10.1016/S0007-8506(07)61035-X

Agarwala, 1995, Direct selective laser sintering of metals, Rapid Prototyp. J., 1, 26, 10.1108/13552549510078113

Gu, 2012, Laser additive manufacturing of metallic components: materials, processes and mechanisms, Int. Mater. Rev., 57, 133, 10.1179/1743280411Y.0000000014

Xiong, 2013, Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturing, J. Clean. Prod., 41, 82, 10.1016/j.jclepro.2012.10.009

Xiong, 2013, Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing, Robot. Comput. Integr. Manuf., 29, 417, 10.1016/j.rcim.2012.09.011

Karunakaran, 2010, Low cost integration of additive and subtractive processes for hybrid layered manufacturing, Robot. Comput. Integr. Manuf., 26, 490, 10.1016/j.rcim.2010.03.008

P.S. Almeida, S. Williams, Innovative process model of Ti–6Al–4V additive layer manufacturing using cold metal transfer (CMT), in: Proceedings of the Twenty-first Annual International Solid Freeform Fabrication Symposium, University of Texas at Austin, Austin, TX, USA, 2010.

Colegrove, 2013, Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling, J. Mater. Process. Technol., 213, 1782, 10.1016/j.jmatprotec.2013.04.012

Dunlavey, 1983, Efficient polygon-filling algorithms for raster displays, ACM Trans. Graph., 2, 264, 10.1145/245.248

Park, 2000, Tool-path planning for direction-parallel area milling, Comput. Aided Des., 32, 17, 10.1016/S0010-4485(99)00080-9

Rajan, 2001, The optimal zigzag direction for filling a two-dimensional region, Rapid Prototyp. J., 7, 231, 10.1108/13552540110410431

Farouki, 1995, Path planning with offset curves for layered fabrication processes, J. Manuf. Syst., 14, 355, 10.1016/0278-6125(95)98872-4

Yang, 2002, Equidistant path generation for improving scanning efficiency in layered manufacturing, Rapid Prototyp. J., 8, 30, 10.1108/13552540210413284

Li, 1994, Optimal toolpath pattern identification for single island, sculptured part rough machining using fuzzy pattern analysis, Comput. Aided Des., 26, 787, 10.1016/0010-4485(94)90092-2

Wang, 2005, A metric-based approach to two-dimensional (2D) tool-path optimization for high-speed machining, Trans. Am. Soc. Mech. Eng. J. Manuf. Sci. Eng., 127, 33, 10.1115/1.1830492

Ren, 2009, Combined reparameterization-based spiral toolpath generation for five-axis sculptured surface machining, Int. J. Adv. Manuf. Technol., 40, 760, 10.1007/s00170-008-1385-9

M. Bertoldi, et al., Domain decomposition and space filling curves in toolpath planning and generation, in Proceedings of the 1998 Solid Freeform Fabrication Symposium, The University of Texas at Austin, Austin, Texas, 1998, pp. 267–274.

Wasser, 1999, Implementation and evaluation of novel buildstyles in fused deposition modeling (FDM), Strain, 5, 95

Dwivedi, 2004, Automated torch path planning using polygon subdivision for solid freeform fabrication based on welding, J. Manuf. Syst., 23, 278, 10.1016/S0278-6125(04)80040-2

Ding, 2014, A tool-path generation strategy for wire and arc additive manufacturing, Int. J. Adv. Manuf. Technol., 73, 173, 10.1007/s00170-014-5808-5

Zhang, 2003, Weld deposition-based rapid prototyping: a preliminary study, J. Mater. Process. Technol., 135, 347, 10.1016/S0924-0136(02)00867-1

Jin, 2013, An adaptive process planning approach of rapid prototyping and manufacturing, Robot. Comput. Integr. Manuf., 29, 23, 10.1016/j.rcim.2012.07.001

Ding, 2015, A multi-bead overlapping model for robotic wire and arc additive manufacturing, Robot. Comput. Integr. Manuf., 31, 101, 10.1016/j.rcim.2014.08.008

J.-H. Kao, F. B. Prinz, Optimal motion planning for deposition in layered manufacturing, in: Proceedings of DETC, 1998, pp. 13–16.

Blum, 1967, A transformation for extracting new descriptors of shape, 19, 362

Lee, 1982, Medial axis transformation of a planar shape, IEEE Trans. Pattern Anal. Mach. Intell., PAMI-4, 363, 10.1109/TPAMI.1982.4767267

Srinivasan, 1987, Voronoi diagram for multiply-connected polygonal domains 1: algorithm, IBM J. Res. Dev., 31, 361, 10.1147/rd.313.0361

Choi, 1997, New algorithm for medial axis transform of plane domain, Graph. Models Image Process., 59, 463, 10.1006/gmip.1997.0444

J.-H. Kao, Process planning for additive/subtractive solid freeform fabrication using medial axis transform, Citeseer, 1999.

Choi, 2002, A tolerant slicing algorithm for layered manufacturing, Rapid Prototyp. J., 8, 161, 10.1108/13552540210430997