A post processing technique to achieve nanofinishing for functionality enhancement of Ti-6Al-4V femoral head fabricated by Laser Powder Bed Fusion

Abbott, 2015, Anodic Dissolution of Metals in Ionic Liquids, Progress in Natural Science: Materials International, 25, 595, 10.1016/j.pnsc.2015.11.005 Alsaeedi, 2018, Evaluation of Chemical Mechanical Polishing-based Surface Modification on 3d Dental Implants Compared to Alternative Methods, Materials, 11 Bacchewar, 2007, Statistical Modelling and Optimization of Surface Roughness in the Selective Laser Sintering Process, 221, 35 Balyakin, 2018, Chemical Polishing of Samples Obtained by Selective Laser Melting from Titanium Alloy Ti6Al4V, MATEC Web of Conferences, 224, 01031, 10.1051/matecconf/201822401031 Bezuidenhout, 2020, The Effect of HF-HNO3 Chemical Polishing on the Surface Roughness and Fatigue Life of Laser Powder Bed Fusion Produced Ti6Al4V, Materials Today Communications, 25, 10.1016/j.mtcomm.2020.101396 Chou, 2015, Additive Manufacturing of Al-12Si Alloy Via Pulsed Selective Laser Melting, JOM, 67, 590, 10.1007/s11837-014-1272-9 Dowson, D., Diab, M., Gillis, B., Atkinson, J., 1985. Influence of countersurface topography on the wear of UHMWPE under wet or dry conditions: polymer wear and its control. Emelogu, 2016, Additive Manufacturing of Biomedical Implants: A Feasibility Assessment Via Supply-chain Cost Analysis, Additive Manufacturing, 11, 97, 10.1016/j.addma.2016.04.006 Gao, 2018, Additive Manufacturing Technique-designed Metallic Porous Implants for Clinical Application in Orthopedics, RSC Advances, 8, 25210, 10.1039/C8RA04815K Godlewska, 2014, Hot Corrosion of Ti–46Al–8Ta (at%) Intermetallic Alloy, Corrosion Science, 78, 63, 10.1016/j.corsci.2013.08.032 Han, 2018, Optimization of AZ91D Process and Corrosion Resistance Using Wire Arc Additive Manufacturing, Applied Sciences, Vol. 8, 10.3390/app8081306 Nakae, 1998, Effects of Surface Roughness on Wettability, Acta Materialia, 46, 2313, 10.1016/S1359-6454(97)00387-X Ivántabernero, 2018, Study on Arc Welding Processes for High Deposition Rate Additive Manufacturing, Procedia CIRP, 68, 358, 10.1016/j.procir.2017.12.095 Jain, 2008, Experimental Investigations for Improving Part Strength in Selective Laser Sintering, Virtual and Physical Prototyping, 3, 177, 10.1080/17452750802065893 Jamshidi, 2020, Selective Laser Melting of Ti-6Al-4V: The Impact of Post-processing on the Tensile, Fatigue and Biological Properties for Medical Implant Applications, Mater, Vol. 13, 10.3390/ma13122813 Jurg, 2022, Surface Improvement of Laser Powder Bed Fusion Processed Ti6Al4V for Fatigue Applications, Additive Manufacturing Letters, 3, 10.1016/j.addlet.2022.100070 Kim, 2019, High-Quality Surface Finishing of Industrial Three-Dimensional Metal Additive Manufacturing Using Electrochemical Polishing, International Journal of Precision Engineering and Manufacturing, 6, 11, 10.1007/s40684-019-00019-2 Lee, 2021, Laser Polishing for Improving Fatigue Performance of Additive Manufactured Ti-6Al-4V Parts, Optics & Laser Technology, 134, 10.1016/j.optlastec.2020.106639 Ma, 2017, Laser Polishing of Additive Manufactured Ti Alloys, Optics and Lasers in Engineering, 93, 171, 10.1016/j.optlaseng.2017.02.005 Mesko, 2011, Ceramic-on-ceramic Hip Outcome at a 5-to 10-year Interval: Has It Lived up to its Expectations?, The Journal of Arthroplasty, 26, 172, 10.1016/j.arth.2010.04.029 Ohmori, 2006, Investigation on Grinding Characteristics and Surface-modifying Effects of Biocompatible Co-Cr Alloy, CIRP Annals - Manufacturing Technology, 55, 597, 10.1016/S0007-8506(07)60491-0 Okada, 2017, Verification of Implant Surface Modification by a Novel Processing Method, Acta Medica Okayama, 71, 49 Pandit, 2008, Pseudotumours Associated with Metal-on-metal Hip Resurfacings, The Journal of Bone and Joint Surgery, 90, 847 Poduska, 2012, Hazardous Waste Reduction from Mixed Acid Titanium Etching, Clean Technologies and Environmental Policy, 14, 69, 10.1007/s10098-011-0377-x Pottier, 2001, Synthesis of Brookite TiO2 Nanoparticlesby Thermolysis of TiCl4 in Strongly Acidic Aqueous Media, Journal of Materials Chemistry, 11, 1116, 10.1039/b100435m Prasad, 2017, Metallic Biomaterials: Current Challenges and Opportunities, Materials, 10 Pyka, 2013, Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures, Materials, Vol. 6, 10.3390/ma6104737 Rack, 2006, Titanium Alloys for Biomedical Applications, Materials Science and Engineering: C, 26, 1269, 10.1016/j.msec.2005.08.032 Rajput, 2022, Investigations on a Hybrid Chemo-magnetorheological Finishing Process for Freeform Surface Quality Enhancement, Journal of Manufacturing Processes, 81, 522, 10.1016/j.jmapro.2022.07.015 Rajput, 2022, Investigations on the Trochoidal Toolpath for Processing the Biomaterial Through Magnetorheological Fluid Assisted Finishing Process, Journal of Manufacturing Processes, 76, 812, 10.1016/j.jmapro.2022.02.055 Rosales, 2017, Phagocytosis: A Fundamental Process in Immunity, BioMed Research International, 2017 Say, 2004, Surface Characterization of Cast Ti-6Al-4V in Hydrofluoric-nitric Pickling Solutions, Surface and Coatings Technology, 176, 337, 10.1016/S0257-8972(03)00747-3 Sedlaček, 2012, Correlation Between Standard Roughness Parameters Skewness and Kurtosis and Tribological Behaviour of Contact Surfaces, Tribology International, 48, 102, 10.1016/j.triboint.2011.11.008 Sefer, 2017, Chemical Milling of Cast Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo Alloys in Hydrofluoric-Nitric Acid Solutions, Corrosion, 73, 394, 10.5006/2277 Sutter, 1990, The Behaviour of Titanium in Nitric-hydrofluoric Acid Solutions, Corrosion Science, 30, 461, 10.1016/0010-938X(90)90051-6 Tsoeunyane, 2022, Electropolishing of Additively Manufactured Ti-6Al-4V Surfaces in Nontoxic Electrolyte Solution, Advances in Materials Science and Engineering, 2022 Urlea, 2017, Electropolishing and Electropolishing-related Allowances for Powder Bed Selectively Laser-melted Ti-6Al-4V Alloy Components, Journal of Materials Processing Technology, 242, 1, 10.1016/j.jmatprotec.2016.11.014 V, 2022, Magnesium Role in Additive Manufacturing of Biomedical Implants – Challenges and Opportunities, Additive Manufacturing, 55, 10.1016/j.addma.2022.102802 Vayssette, 2018, Surface Roughness of Ti-6Al-4V Parts Obtained by SLM and EBM: Effect on the High Cycle Fatigue life, Procedia Engineering, 213, 89, 10.1016/j.proeng.2018.02.010 Willert, 2005, Metal-on-metal Bearings and Hypersensitivity in Patients with Artificial Hip Joints: A Clinical and Histomorphological Study, JBJS, 87, 28, 10.2106/00004623-200501000-00006 Wysocki, 2019, The Influence of Chemical Polishing of Titanium Scaffolds on their Mechanical Strength and in-vitro Cell Response, Materials Science and Engineering: C, 95, 428, 10.1016/j.msec.2018.04.019 Yadroitsev, 2007, Parametric Analysis of the Selective Laser Melting Process, Applied Surface Science, 253, 8064, 10.1016/j.apsusc.2007.02.088 Yang, 2016, Electropolishing of Surfaces: Theory and Applications, Surface Engineering, 33, 149, 10.1080/02670844.2016.1198452 Zhang, 2021, The Tribological Behavior of a Surface-nanocrystallized Magnesium alloy AZ31 Sheet After Ultrasonic Shot Peening Treatment, Journal of Magnesium and Alloys, 9, 1187, 10.1016/j.jma.2020.11.012