A patient specific finite element simulation of intramedullary nailing to predict the displacement of the distal locking hole

Medical Engineering & Physics - Tập 55 - Trang 34-42 - 2018
Javad Mortazavi1, Farzam Farahmand1,2, Saeed Behzadipour1, Ali Yeganeh3, Mohammad Aghighi4
1Mechanical Engineering Department, Sharif University of Technology, Tehran, Iran
2RCBTR, Tehran University of Medical Sciences, Azadi Avenue, Tehran, Iran
3Department of Orthopedic Surgery, Iran University of Medical Sciences, Tehran, Iran
4Iranian Tissue Bank and Research Center, Tehran University of Medical Sciences, Tehran, Iran

Tài liệu tham khảo

Winquist, 1984, Closed intramedullary nailing of femoral fractures. A report of five hundred and twenty cases, J Bone Joint Surg Am, 66, 529, 10.2106/00004623-198466040-00006 Harma, 2005, The comparison of femoral curves and curves of contemporary intramedullary nails, Surg Radiol Anat, 27, 502, 10.1007/s00276-005-0019-2 Krettek, 1998, Deformation of femoral nails with intramedullary insertion, J Orthop Res, 16, 572, 10.1002/jor.1100160508 Pardiwala, 2001, The AO distal locking aiming device: an evaluation of efficacy and learning curve, Injury, 32, 713, 10.1016/S0020-1383(01)00100-0 Krettek, 1999, A mechanical distal aiming device for distal locking in femoral nails, Clin Orthop, 364, 267, 10.1097/00003086-199907000-00033 Sugarman, 1988, Radiation dosage during AO locking femoral nailing, Injury, 19, 336, 10.1016/0020-1383(88)90107-6 Uruc, 2013, The comparison of freehand fluoroscopic guidance and electromagnetic navigation for distal locking of intramedullary implants, Injury, 44, 863, 10.1016/j.injury.2012.12.009 Stathopoulos, 2013, Radiation-free distal locking of intramedullary nails: Evaluation of a new electromagnetic computer-assisted guidance system, Injury, 44, 872, 10.1016/j.injury.2012.08.051 Whatling, 2006, Literature review of current techniques for the insertion of distal screws into intramedullary locking nails, Injury, 37, 109, 10.1016/j.injury.2005.09.009 Arlettaz, 2012, Distal locking of femoral nails: evaluation of a new radiation-independent targeting system, J Orthop Trauma, 26, 633, 10.1097/BOT.0b013e318242d8b7 Joskowicz, 1998, FRACAS: a system for computer-aided image-guided long bone fracture surgery, Comput Aided Surg, 3, 271, 10.3109/10929089809148148 Malek, 2005, Computer assisted orthopaedic surgical system for insertion of distal locking screws in intra‐medullary nails: a valid and reliable navigation system, Int J Med Robot, 1, 34, 10.1002/rcs.54 Kempf, 1985, Closed locked intramedullary nailing. Its application to comminuted fractures of the femur, J Bone Joint Surg Am., 67, 709, 10.2106/00004623-198567050-00005 Tyropoulos, 2001, A new distal targeting device for closed interlocking nailing, Injury, 32, 732, 10.1016/S0020-1383(01)00021-3 Arlettaz, 2008, Targeting device for intramedullary nails: a new high-stable mechanical guide, Injury, 39, 170, 10.1016/j.injury.2007.06.006 Krettek, 1998, A new mechanical aiming device for the placement of distal interlocking screws in femoral nails, Arch Orthop Trauma Surg, 117, 147, 10.1007/s004020050215 Boraiah, 2009, Efficacy of an aiming device for the placement of distal interlocking screws in trochanteric fixation nailing, Arch Orthop Trauma Surg, 129, 1177, 10.1007/s00402-008-0710-y Leloup, 2008, A novel technique for distal locking of intramedullary nail based on two non-constrained fluoroscopic images and navigation, IEEE Trans Med Imaging, 27, 1202, 10.1109/TMI.2008.920602 Zheng, 2008, A robust and accurate two-stage approach for automatic recovery of distal locking holes in computer-assisted intramedullary nailing of femoral shaft fractures, IEEE Trans Med Imaging., 27, 171, 10.1109/TMI.2007.904692 Zheng, 2009, A novel parameter decomposition based optimization approach for automatic pose estimation of distal locking holes from single calibrated fluoroscopic image, Pattern Recog Lett, 30, 838, 10.1016/j.patrec.2008.05.017 Yaniv, 2005, Precise robot-assisted guide positioning for distal locking of intramedullary nails, IEEE Trans Med Imaging, 24, 624, 10.1109/TMI.2005.844922 Zysset P.K., Dall'Ara E., Varga P., Pahr D.H. Finite element analysis for prediction of bone strength. BoneKEy reports. 2013; 2. Cheung, 2004, Finite element analysis of a femoral retrograde intramedullary nail subject to gait loading, Med Eng Phys, 26, 93, 10.1016/j.medengphy.2003.10.006 Sitthiseripratip, 2003, Finite element study of trochanteric gamma nail for trochanteric fracture, Med Eng Phys, 25, 99, 10.1016/S1350-4533(02)00185-6 Wang, 1998, Finite element analysis of a Gamma nail within a fractured femur, Med Eng Phys, 20, 677, 10.1016/S1350-4533(98)00079-4 Pahr, 2009, From high-resolution CT data to finite element models: development of an integrated modular framework, Comput Methods Biomech Biomed Eng, 12, 45, 10.1080/10255840802144105 Keyak, 2003, Comparison of in situ and in vitro CT scan-based finite element model predictions of proximal femoral fracture load, Med Eng Phys, 25, 781, 10.1016/S1350-4533(03)00081-X Trabelsi, 2009, Validation of subject-specific automated p-FE analysis of the proximal femur, J Biomech, 42, 234, 10.1016/j.jbiomech.2008.10.039 Trabelsi, 2011, Patient-specific finite element analysis of the human femur—a double-blinded biomechanical validation, J Biomech, 44, 1666, 10.1016/j.jbiomech.2011.03.024 Viceconti, 1998, A comparative study on different methods of automatic mesh generation of human femurs, Med Eng Phys, 20, 1, 10.1016/S1350-4533(97)00049-0 Helgason, 2008, A modified method for assigning material properties to FE models of bones, Med Eng Phys, 30, 444, 10.1016/j.medengphy.2007.05.006 Rasmussen, 2003, Full-range stress–strain curves for stainless steel alloys, J Constr Steel Res, 59, 47, 10.1016/S0143-974X(02)00018-4 Dammak, 1997, Friction properties at the bone‐metal interface: comparison of four different porous metal surfaces, J Biomed Mater Res, 35, 329, 10.1002/(SICI)1097-4636(19970605)35:3<329::AID-JBM7>3.0.CO;2-J Yosibash, 2007, A CT-based high-order finite element analysis of the human proximal femur compared to in-vitro experiments, J Biomech Eng, 129, 297, 10.1115/1.2720906 Dall'Ara, 2013, A nonlinear QCT-based finite element model validation study for the human femur tested in two configurations in vitro, Bone, 52, 27, 10.1016/j.bone.2012.09.006 Wirtz, 2000, Critical evaluation of known bone material properties to realize anisotropic FE-simulation of the proximal femur, J Biomech, 33, 1325, 10.1016/S0021-9290(00)00069-5 Iyo, 2004, Anisotropic viscoelastic properties of cortical bone, J Biomech, 37, 1433, 10.1016/j.jbiomech.2003.12.023 Su, 2015, Three-dimensional analysis of the curvature of the femoral canal in 426 Chinese femurs, BioMed Res Int, 2015 Moor, 2012, Distal locking of femoral nails. Mathematical analysis of the appropriate targeting range, Orthop Traumatol Surg Res., 98, 85, 10.1016/j.otsr.2011.08.010 Bayraktar, 2004, Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue, J Biomech, 37, 27, 10.1016/S0021-9290(03)00257-4 Malekmotiei, 2013, An analytical approach to study the intraoperative fractures of femoral shaft during total hip arthroplasty, J Biomech Eng, 135, 10.1115/1.4023699 Stephenson, 1999, Cross-sectional geometry of the human femur in the mid-third region, Proc Inst Mech Eng H J Eng Med, 213, 159, 10.1243/0954411991534889