A numerical study on the effect of cavitation erosion in a diesel injector

Van Basshuysen, 2004, Internal combustion engine handbook—basics, components, 345 Bosch, 2007 Egler, 2010, Fuel injection systems, 10.1007/978-3-540-89083-6_5 Dular, 2006, Development of a cavitation erosion model, Wear, 261, 642, 10.1016/j.wear.2006.01.020 Bark, 2009, On some physics to consider in numerical simulation of erosive cavitation Sezal, 2009, Shock and wave dynamics in cavitating compressible liquid flows in injection nozzles, Shock Waves, 19, 49, 10.1007/s00193-008-0185-3 Skoda, 2011, Numerical simulation of collapse induced shock dynamics for the prediction of the geometry, pressure and temperature impact on the cavitation erosion in micro channels Skoda, 2012, Comparison of compressible explicit density-based and implicit pressure-based CFD methods for the simulation of cavitating flows Fortes-Patella, 2012, Numerical and experimental investigations on cavitation erosion Pöhl, 2015, Evaluation of cavitation–induced pressure loads applied to material surfaces by finite–element–assisted pit analysis and numerical investigation of the elasto–plastic deformation of metallic materials, Wear, 330–331, 618, 10.1016/j.wear.2014.12.048 Mihatsch, 2015, Cavitation erosion prediction based on analysis of flow dynamics and impact load spectra, Phys. Fluids, 27 Koukouvinis, 2015, A cavitation aggressiveness index within the Reynolds averaged Navier Stokes methodology for cavitating flows, J. Hydrodyn., 27, 579, 10.1016/S1001-6058(15)60519-4 Koukouvinis, 2017, Prediction of cavitation and induced erosion inside a high-pressure fuel pump, Int. J. Engine Res., 16, 360, 10.1177/1468087417708137 Ghahramani, 2018, Realizability improvements to a hybrid mixture–bubble model for simulation of cavitating flows, Comput. Fluids, 174, 135, 10.1016/j.compfluid.2018.06.025 Schenke, 2019, On the relevance of kinematics for cavitation implosion loads, Phys. Fluids, 31 Grogger, 1998, Calculation of the cavitating flow in Venturi geometries using two fluid model Arcoumanis, 1998, Cavitation in diesel injectors: modelling and experiments Alajbegović, 1999, Calculation of transient cavitation in nozzle using the two-fluid model Roth, 2005, Effect of multi-injection strategy on cavitation development in diesel injector nozzle holes, SAE Trans. J. Engines, 114, 1029 Andriotis A. Gavaises, 2009, Influence of vortex flow and cavitation on near–nozzle diesel spray dispersion angle, Atom. Sprays, 19, 247, 10.1615/AtomizSpr.v19.i3.30 Reid, 2010, An investigation of string cavitation in a true-scale fuel injector flow geometry at high pressure, Phys. Fluids, 22 Mitroglou, 2011, Cavitation inside real-size fully transparent fuel injector nozzles and its effect on near-nozzle spray formation Gavaises, 2015, Visualisation and LES simulation of cavitation cloud formation and collapse in an axisymmetric geometry, Int. J. Multiph. Flow, 68, 14, 10.1016/j.ijmultiphaseflow.2014.09.008 Egerer, 2014, Large-eddy simulation of turbulent cavitating flow in a micro channel, Phys.Fluids, 26, 190 Koukouvinis, 2016, Large eddy simulation of diesel injector including cavitation effects and correlation to erosion damage, Fuel, 175, 26, 10.1016/j.fuel.2016.02.037 Koukouvinis, 2017, Quantitative predictions of cavitation presence and erosion-prone locations in a high-pressure cavitation test rig, J. Fluid Mech., 819, 21, 10.1017/jfm.2017.156 Cristofaro, 2017, Numerical simulation of compressible cavitating two-phase flows with a pressure-based solver Cristofaro, 2018, Large eddy simulation of the internal injector flow during pilot injection Gavaises, 2006, Cavitation inside multi–hole injectors for large diesel engines and its effect on the near–nozzle spray structure, Trans. J. Engines SAE Pap. 2006–01–1114, 115–3, 634 Andriotis, 2008, Vortex flow and cavitation in diesel injector nozzles, J. Fluid Mech., 610, 195, 10.1017/S0022112008002668 Shi, 2018, Large eddy simulation as an effective tool for GDI nozzle development, MTZ Worldwide, 79, 58, 10.1007/s38313-018-0089-2 Lešnik, 2018, The influence of in-nozzle cavitation on flow characteristics and spray break-up, Fuel, 222, 550, 10.1016/j.fuel.2018.02.144 Edelbauer, 2014, Large eddy simulation of cavitating throttle flow Lechner, 2019, Fast, thin jets from bubbles expanding and collapsing in extreme vicinity to a solid boundary: a numerical study, Phys. Rev. Fluids, 4 Schmidt, 2011, Assessment of the prediction capability of a thermodynamic cavitation model for the collapse characteristics of a vapor-bubble cloud Schenke, 2017, Simulating compressibility in cavitating flows with an incompressible mass transfer flow solver, 71 Patankar, 1972, A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows, Int. J. Heat Mass Transf., 15, 1787, 10.1016/0017-9310(72)90054-3 Lord Rayleigh, 1917, On the pressure developed in a liquid during the collapse of a spherical cavity, Philos. Mag. Ser. 6, 34, 94, 10.1080/14786440808635681 Plesset, 1949, The dynamics of cavitation bubbles, ANSME J. Appl. Mech., 16, 228 Wood, 1930 Kobayashi, 2005, The subgrid-scale models based on coherent structures for rotating homogeneous turbulence and turbulent channel flow, Phys. Fluids, 17 Schiller, 1933, Über die grundlegenden Berechnungen bei der Schwerkraftaufbereitung, Z. Ver. Deut. Ing., 77, 318 Grinstein, 2007, 10.1017/CBO9780511618604 Schmidt, 2014, 106, 10.1007/978-94-017-8539-6_14 Gaskell, 1988, Curvature-compensated convective transport: SMART, a new boundedness-preserving transport algorithm, Int. J. Numer. Methods Fluids, 8, 617, 10.1002/fld.1650080602 Sweby, 1984, High resolution schemes using flux limiters for hyperbolic conservation laws, SIAM J. Numer. Anal., 21, 995, 10.1137/0721062 2018 von Berg, 2004, Coupled simulations of nozzle flow, primary fuel jet breakup, and spray formation, J. Eng. Gas Turb. Power, 127, 0742 Mandumpala Devassy, 2016, Study of cavitation and 3D needle movement due to erosion in fuel injection nozzles using coupled simulation tools Launder, 1974, The numerical computation of turbulent flows, Comput. Methods Appl. Mech. Eng., 3, 269, 10.1016/0045-7825(74)90029-2 Tatschl, 2000, Diesel spray break–up modeling including multidimensional cavitating nozzle flow effects, Darmstadt, Germany Abramzon, 1989, Droplet vaporization model for spray combustion calculations, Int. J. Heat Mass Transf., 32, 1605, 10.1016/0017-9310(89)90043-4 Liu, 1993, Modeling the effects of drop drag and breakup on fuel sprays, SAE Tech. Pap., 83 Fröhlich, 2005, Highly resolved large-eddy simulation of separated flow in a channel with streamwise periodic constrictions, J. Fluid Mech., 526, 19, 10.1017/S0022112004002812 Šarić, 2007, Evaluation of detached eddy simulations for predicting the flow over periodic hills, 16, 133 Basara, 2006, An eddy viscosity transport model based on elliptic relaxation approach, AIAA J., 44, 1686, 10.2514/1.20739 Greif, 2011, Numerical prediction of erosive cavitating flows in injection equipment Franc, 2005, 10.1007/1-4020-2233-6 Shah, 1987, Laminar convective heat transfer in ducts, 3 López, 2012, A comprehensive study on the effect of cavitation on injection velocity in diesel nozzles, Energy Convers. Manag., 64, 415, 10.1016/j.enconman.2012.03.032 He, 2015, Experimental and numerical study of cavitation inception phenomenon in diesel injector nozzles, Int. Commun. Heat Mass Transf., 65, 117, 10.1016/j.icheatmasstransfer.2015.04.009 Ghiji, 2016, Numerical and experimental investigation of early stage diesel sprays, Fuel, 175, 274, 10.1016/j.fuel.2016.02.040 Ghiji, 2017, Analysis of diesel spray dynamics using a compressible Eulerian/VOF/LES model and microscopic shadowgraphy, Fuel, 188, 352, 10.1016/j.fuel.2016.10.041 Salvador, 2017, Using a homogeneous equilibrium model for the study of the inner nozzle flow and cavitation pattern in convergent–divergent nozzles of diesel injectors, J. Comput. Appl. Math., 309, 630, 10.1016/j.cam.2016.04.010 Pickett, 2010, Comparison of diesel spray combustion in different high-temperature, high-pressure facilities, SAE Int. J. Engines, 3, 156, 10.4271/2010-01-2106 Kastengren, 2012, Engine combustion network (ECN): Measurements of nozzle geometry and hydraulic behavior, Atom. Sprays, 22, 1011, 10.1615/AtomizSpr.2013006309