A numerical-experimental coupled method for the identification of model parameters from µ-SPIF test using a finite element updating method
Tóm tắt
Từ khóa
Tài liệu tham khảo
Duflou JR, Habraken A-M, Cao J, Malhotra R, Bambach M, Adams D, Jeswiet J (2018) Single point incremental forming: state-of-the-art and prospects. Int J Mater Form 11(6):743–773. https://doi.org/10.1007/s12289-017-1387-y
McClintock FA (1968) A criterion for ductile fracture by the growth of holes. J Appl Mech 35(2):363–371. https://doi.org/10.1115/1.3601204
Rice JR, Tracey DM (1969) On the ductile enlargement of voids in triaxial stress fields∗. J Mech Phys Solids 17(3):201–217. https://doi.org/10.1016/0022-5096(69)90033-7
Gurson AL (1977) Continuum theory of ductile rupture by void nucleation and growth: part I—yield criteria and flow rules for porous ductile media. J Eng Mater Technol 99(1):2–15. https://doi.org/10.1115/1.3443401
Tvergaard V (1981) Influence of voids on shear band instabilities under plane strain conditions. Int J Fract 17(4):389–407. https://doi.org/10.1007/BF00036191
Tvergaard V (1982) Influence of void nucleation on ductile shear fracture at a free surface. J Mech Phys Solids 30(6):399–425. https://doi.org/10.1016/0022-5096(82)90025-4
Tvergaard V, Needleman A (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Metall 32(1):157–169. https://doi.org/10.1016/0001-6160(84)90213-X
Besson J, Devillers-Guerville L, Pineau A (2000) Modeling of scatter and size effect in ductile fracture: application to thermal embrittlement of duplex stainless steels. Eng Fract Mech 67(2):169–190. https://doi.org/10.1016/S0013-7944(00)00056-4
Chen Z, Dong X (2009) The GTN damage model based on Hill’48 anisotropic yield criterion and its application in sheet metal forming. Comput Mater Sci 44(3):1013–1021. https://doi.org/10.1016/j.commatsci.2008.07.020
Kiran R, Khandelwal K (2014) Gurson model parameters for ductile fracture simulation in ASTM A992 steels: Gurson model parameters for ductile fracture simulation in ASTM A992 steels. Fatigue Fract Eng Mater Struct 37(2):171–183. https://doi.org/10.1111/ffe.12097
Benzerga AA, Leblond J-B, Needleman A, Tvergaard V (2016) Ductile failure modeling. Int J Fract 201(1):29–80. https://doi.org/10.1007/s10704-016-0142-6
Aldakheel F, Wriggers P, Miehe C (2018) A modified Gurson-type plasticity model at finite strains: formulation, numerical analysis and phase-field coupling. Comput Mech 62(4):815–833. https://doi.org/10.1007/s00466-017-1530-0
Ould Ouali M (2018) Relevance of incorporating cavity shape change in modelling the ductile failure of metals. Math Probl Eng 2018:1–9. https://doi.org/10.1155/2018/6454790
He Z, Zhu H, Hu Y (2021) An improved shear modified GTN model for ductile fracture of aluminium alloys under different stress states and its parameters identification. Int J Mech Sci 192:106081. https://doi.org/10.1016/j.ijmecsci.2020.106081
Bao Y, Wierzbicki T (2004) On fracture locus in the equivalent strain and stress triaxiality space. Int J Mech Sci 46(1):81–98. https://doi.org/10.1016/j.ijmecsci.2004.02.006
Lou Y, Huh H (2013) Evaluation of ductile fracture criteria in a general three-dimensional stress state considering the stress triaxiality and the lode parameter. Acta Mech Solida Sin 26(6):642–658. https://doi.org/10.1016/S0894-9166(14)60008-2
Xue L (2008) Constitutive modeling of void shearing effect in ductile fracture of porous materials. Eng Fract Mech 75(11):3343–3366. https://doi.org/10.1016/j.engfracmech.2007.07.022
Nahshon K, Hutchinson JW (2008) Modification of the Gurson model for shear failure. Eur J Mech A Solids 27(1):1–17. https://doi.org/10.1016/j.euromechsol.2007.08.002
Malcher L, Reis FJP, Andrade Pires FM, César de Sá JMA (2013) Evaluation of shear mechanisms and influence of the calibration point on the numerical results of the GTN model. Int J Mech Sci 75:407–422. https://doi.org/10.1016/j.ijmecsci.2013.08.008
Malcher L, Andrade Pires FM, César de Sá JMA (2014) An extended GTN model for ductile fracture under high and low stress triaxiality. Int J Plast 54:193–228. https://doi.org/10.1016/j.ijplas.2013.08.015
Kami A, Dariani B, Sadough VS, Comsa D-S, Banabic D (2014) Application of a GTN damage model to predict the fracture of metallic sheets subjected to deep-drawing. In: Proceedings of the Romanian Academy - Series A: mathematics, physics, technical sciences, information science 15:300–309
Kami A, Dariani BM, Sadough Vanini A, Comsa DS, Banabic D (2015) Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model. J Mater Process Technol 216:472–483. https://doi.org/10.1016/j.jmatprotec.2014.10.017
Gatea S, Ou H, Lu B, McCartney G (2017) Modelling of ductile fracture in single point incremental forming using a modified GTN model. Eng Fract Mech 186:59–79. https://doi.org/10.1016/j.engfracmech.2017.09.021
Belouettar K, Mohand OO, Nasereddine Z, Sébastien T (2021) Investigation of the influence of incremental sheet forming process parameters using response surface methodology. Metall Res Technol 118(4):401. https://doi.org/10.1051/metal/2021039
Ying L, Wang D, Liu W, Wu Y, Hu P (2018) On the numerical implementation of a shear modified GTN damage model and its application to small punch test. IntJ Mater Form 11(4):527–539. https://doi.org/10.1007/s12289-017-1362-7
Achouri M, Germain G, Dal Santo P, Saidane D (2013) Numerical integration of an advanced Gurson model for shear loading: application to the blanking process. Comput Mater Sci 72:62–67. https://doi.org/10.1016/j.commatsci.2013.01.035
Achouri M, Germain G, Dal Santo P, Saidane D (2013) Experimental characterization and numerical modeling of micromechanical damage under different stress states. Mater Des 50:207–222. https://doi.org/10.1016/j.matdes.2013.02.075
Aguir H, Marouani H (2010) Gurson-Tvergaard-Needleman parameters identification using artificial neural networks in sheet metal blanking. IntJ Mater Form 3(S1):113–116. https://doi.org/10.1007/s12289-010-0720-5
Marouani H, Aguir H (2012) Identification of material parameters of the Gurson–Tvergaard–Needleman damage law by combined experimental, numerical sheet metal blanking techniques and artificial neural networks approach. IntJ Mater Form 5(2):147–155. https://doi.org/10.1007/s12289-011-1035-x
Abbassi F, Belhadj T, Mistou S, Zghal A (2013) Parameter identification of a mechanical ductile damage using Artificial Neural Networks in sheet metal forming. Mater Des 45:605–615. https://doi.org/10.1016/j.matdes.2012.09.032
Sun Q, Lu Y, Chen J (2020) Identification of material parameters of a shear modified GTN damage model by small punch test. Int J Fract 222(1–2):25–35. https://doi.org/10.1007/s10704-020-00428-4
Corigliano A, Mariani S, Orsatti B (2000) Identification of Gurson-Tvergaard material model parameters via Kalman filtering technique. I. Theory. Int J Fract 104(4):349–373. https://doi.org/10.1023/A:1007602106711
Springmann M, Kuna M (2005) Identification of material parameters of the Gurson–Tvergaard–Needleman model by combined experimental and numerical techniques. Comput Mater Sci 32(3–4):544–552. https://doi.org/10.1016/j.commatsci.2004.09.010
Springmann M, Kuna M (2006) Determination of ductile damage parameters by local deformation fields: measurement and simulation. Arch Appl Mech 75(10–12):775–797. https://doi.org/10.1007/s00419-006-0033-9
Muñoz-Rojas PA, Cardoso EL, Vaz M (2010) Parameter identification of damage models using genetic algorithms. Exp Mech 50(5):627–634. https://doi.org/10.1007/s11340-009-9321-y
Ghouati O, Gelin JC (1998) Identification of material parameters directly from metal forming processes. J Mater Process Technol 80–81:560–564. https://doi.org/10.1016/S0924-0136(98)00159-9
Ben Hmida R, Richard F, Thibaud S, Malécot P (2015) Elastic-plastic damage behavior identification in micro scale length from instrumented micro-single point incremental forming. 4M/ ICOMM2015 conf. Research Publishing, Milan, Italy, pp 230–233. https://doi.org/10.3850/978-981-09-4609-8_059
Hapsari G, Richard F, Ben Hmida R, Malécot P, Thibaud S (2018) Instrumented incremental sheet testing for material behavior extraction under very large strain: Information richness of continuous force measurement. Mater Des 140:317–331. https://doi.org/10.1016/j.matdes.2017.12.002
Aravas N (1987) On the numerical integration of a class of pressure-dependent plasticity models. Int J Numer Meth Eng 24(7):1395–1416. https://doi.org/10.1002/nme.1620240713
Zhang ZL (1995) Explicit consistent tangent moduli with a return mapping algorithm for pressure-dependent elastoplasticity models. Comput Methods Appl Mech Eng 121(1–4):29–44. https://doi.org/10.1016/0045-7825(94)00707-T
Ben Chabane N, Aguechari N, Ould Ouali M (2022) Study of the slant fracture in solid and hollow cylinders: experimental analysis and numerical prediction. Frattura ed Integrità Strutturale 17(63):169–189. https://doi.org/10.3221/IGF-ESIS.63.15
Nahshon K, Xue Z (2009) A modified Gurson model and its application to punch-out experiments. Eng Fract Mech 76(8):997–1009. https://doi.org/10.1016/j.engfracmech.2009.01.003
Ben Hmida R, Thibaud S, Gilbin A, Richard F (2013) Influence of the initial grain size in single point incremental forming process for thin sheets metal and microparts: experimental investigations. Mater Des 45:155–165. https://doi.org/10.1016/j.matdes.2012.08.077
Gréban F, Monteil G, Roizard X (2007) Influence of the structure of blanked materials upon the blanking quality of copper alloys. J Mater Process Technol 186(1–3):27–32. https://doi.org/10.1016/j.jmatprotec.2006.11.226
Hapsari G, Thibaud S, Richard F, Malécot P, Hmida RB, Bonnardot C (2020) Thin sheet behaviour identification by µ-InDef and identifiability analysis. Proc Manuf 47:1481–1489. https://doi.org/10.1016/j.promfg.2020.04.330
Voce E (1955) A practical strain-hardening function. Metallurgica 51:219–226
Oh C-K, Kim Y-J, Baek J-H, Kim Y-P, Kim W (2007) A phenomenological model of ductile fracture for API X65 steel. Int J Mech Sci 49(12):1399–1412. https://doi.org/10.1016/j.ijmecsci.2007.03.008
Nielsen KL, Tvergaard V (2009) Effect of a shear modified Gurson model on damage development in a FSW tensile specimen. Int J Solids Struct 46(3–4):587–601. https://doi.org/10.1016/j.ijsolstr.2008.09.011
Levenberg K (1944) A method for the solution of certain non-linear problems in least squares. Q Appl Math 2(2):164–168
Marquardt DW (1963) An algorithm for least-squares estimation of nonlinear parameters. J Soc Ind Appl Math 11(2):431–441
Richard F (1999) MIC2M: Modélisation et identification du comportement mécanique des matériaux. Université de Franche-Comté. http://mic2m.univ-fcomte.fr. Accessed 2022
Thibaud S, Ben Hmida R, Richard F, Malécot P (2012) A fully parametric toolbox for the simulation of single point incremental sheet forming process: numerical feasibility and experimental validation. Simul Model Pract Theory 29:32–43. https://doi.org/10.1016/j.simpat.2012.07.004
Brun R, Reichert P, Künsch HR (2001) Practical identifiability analysis of large environmental simulation models. Water Resour Res 37(4):1015–1030. https://doi.org/10.1029/2000WR900350
Richard F, Villars M, Thibaud S (2013) Viscoelastic modeling and quantitative experimental characterization of normal and osteoarthritic human articular cartilage using indentation. J Mech Behav Biomed Mater 24:41–52. https://doi.org/10.1016/j.jmbbm.2013.04.012
Ould Ouali M, Aberkane M (2009) Micromechanical modeling of the rolling of a A1050P aluminum sheet. IntJ Mater Form 2(1):25–36. https://doi.org/10.1007/s12289-008-0387-3
Torki ME, Tekoğlu C, Leblond J-B, Benzerga AA (2017) Theoretical and numerical analysis of void coalescence in porous ductile solids under arbitrary loadings. Int J Plast 91:160–181. https://doi.org/10.1016/j.ijplas.2017.02.011