A novel sensitivity analysis model of EANN for F-MWCNTs–Fe3 O4 /EG nanofluid thermal conductivity: Outputs predicted analytically instead of numerically to more accuracy and less costs
Tóm tắt
Từ khóa
Tài liệu tham khảo
Aminossadati, 2011, Effects of magnetic field on nanofluid forced convection in a partially heated microchannel, Int. J. Non-Linear Mech., 46, 1373, 10.1016/j.ijnonlinmec.2011.07.013
Chon, 2005, Empirical correlation finding the role of temperature and particle size for nanofluid (Al2O3) thermal conductivity enhancement, Appl. Phys. Lett., 87, 10.1063/1.2093936
Xuan, 2003, Investigation on convective heat transfer and flow features of nanofluids, J. Heat Transfer, 125, 151, 10.1115/1.1532008
Brinkman, 1952, The viscosity of concentrated suspensions and solutions, J. Chem. Phys., 20, 10.1063/1.1700493
Santra, 2009, Study of heat transfer due to laminar flow of copper–water nanofluid through two isothermally heated parallel plates, Int. J. Therm. Sci., 48, 391, 10.1016/j.ijthermalsci.2008.10.004
Karimipour, 2015, New correlation for Nusselt number of nanofluid with Ag/Al2O3/Cu nanoparticles in a microchannel considering slip velocity and temperature jump by using lattice Boltzmann method, Int. J. Therm. Sci., 91, 146, 10.1016/j.ijthermalsci.2015.01.015
Karimipour, 2015, Simulation of copper–water nanofluid in a microchannel in slip flow regime using the lattice Boltzmann method, Eur. J. Mech. B Fluids, 49, 89, 10.1016/j.euromechflu.2014.08.004
Safaei, 2018, The investigation of thermal radiation and free convection heat transfer mechanisms of nanofluid inside a shallow cavity by lattice Boltzmann method, Physica A, 509, 515, 10.1016/j.physa.2018.06.034
Karimipour, 2018, Develop the lattice Boltzmann method to simulate the slip velocity and temperature domain of buoyancy forces of FMWCNT nano particles in water through a micro flow imposed to the specified heat flux, Physica A, 509, 729, 10.1016/j.physa.2018.06.031
Jourabian, 2018, Melting process in porous media around two hot cylinders: Numerical study using the lattice Boltzmann method, Physica A, 509, 316, 10.1016/j.physa.2018.06.011
Harandi, 2016, An experimental study on thermal conductivity of F-MWCNTs–Fe3O4/EG hybrid nanofluid: Effects of temperature and concentration, Int. Commun. Heat Mass Transfer, 76, 171, 10.1016/j.icheatmasstransfer.2016.05.029
Baratpour, 2016, Effects of temperature and concentration on the viscosity of nanofluids made of single-wall carbon nanotubes in ethylene glycol, Int. Commun. Heat Mass Transfer, 74, 108, 10.1016/j.icheatmasstransfer.2016.02.008
Esfe, 2015, Experimental study on thermal conductivity of DWCNT-ZnO/water-EG nanofluids, Int. Commun. Heat Mass Transfer, 68, 248, 10.1016/j.icheatmasstransfer.2015.09.001
Bahrami, 2016, An experimental study on rheological behavior of hybrid nanofluids made of iron and copper oxide in a binary mixture of water and ethylene glycol: Non-Newtonian behavior, Exp. Therm Fluid Sci., 79, 231, 10.1016/j.expthermflusci.2016.07.015
Zadkhast, 2017, Developing a new correlation to estimate the thermal conductivity of MWCNT-CuO/water hybrid nanofluid via an experimental investigation, J. Thermal Anal. Calorim., 129, 859, 10.1007/s10973-017-6213-8
Mehrali, 2014, Preparation, characterization, viscosity, and thermal conductivity of nitrogen-doped graphene aqueous nanofluids, J. Mater. Sci., 49, 7156, 10.1007/s10853-014-8424-8
Hosseini, 2017, New temperature, interfacial shell dependent dimensionless model for thermal conductivity of nanofluids, Int. J. Heat Mass Transfer, 114, 207, 10.1016/j.ijheatmasstransfer.2017.06.061
Arani, 2017, Heat transfer improvement of water/single-wall carbon nanotubes (SWCNT) nanofluid in a novel design of a truncated double-layered microchannel heat sink, Int. J. Heat Mass Transfer, 113, 780, 10.1016/j.ijheatmasstransfer.2017.05.089
Hornik, 1989, Multilayer feedforward networks are universal approximators, Neural Netw., 2, 359, 10.1016/0893-6080(89)90020-8
Hornik, 1991, Approximation capabilities of multilayer feedforward networks, Neural Netw., 4, 251, 10.1016/0893-6080(91)90009-T
Esfe, 2015, Thermal conductivity of Cu/TiO2–water/EG hybrid nanofluid: Experimental data and modeling using artificial neural network and correlation, Int. Commun. Heat Mass Transfer, 66, 100, 10.1016/j.icheatmasstransfer.2015.05.014
Esfe, 2015, Modeling of thermal conductivity of ZnO-EG using experimental data and ANN methods, Int. Commun. Heat Mass Transfer, 63, 35, 10.1016/j.icheatmasstransfer.2015.01.001
Esfe, 2015, Evaluation of thermal conductivity of COOH-functionalized MWCNTs/water via temperature and solid volume fraction by using experimental data and ANN methods, J. Thermal Anal. Calorim., 121, 1273, 10.1007/s10973-015-4565-5
Esfe, 2018, Rheological behavior characteristics of ZrO2-MWCNT/10w40 hybrid nano-lubricant affected by temperature, concentration, and shear rate: An experimental study and a neural network simulating, Physica E, 102, 160, 10.1016/j.physe.2017.12.023
Nadooshan, 2018, Prediction of rheological behavior of SiO2-MWCNTs/10W40 hybrid nanolubricant by designing neural network, J. Thermal Anal. Calorim., 131, 2741, 10.1007/s10973-017-6688-3
Alrashed, 2018, Effects on thermophysical properties of carbon based nanofluids: Experimental data, modelling using regression, ANFIS and ANN, Int. J. Heat Mass Transfer, 125, 920, 10.1016/j.ijheatmasstransfer.2018.04.142
Haghighi, 2018, Natural convection heat transfer enhancement in new designs of plate-fin based heat sinks, Int. J. Heat Mass Transfer, 125, 640, 10.1016/j.ijheatmasstransfer.2018.04.122
Shojaeizadeh, 2018, Bed roughness effects on characteristics of turbulent confined wall jets, Measurement, 122, 325, 10.1016/j.measurement.2018.02.033
Abbassi, 2018, LBM simulation of free convection in a nanofluid filled incinerator containing a hot block, Int. J. Mech. Sci., 148, 393, 10.1016/j.ijmecsci.2018.04.057
Goodarzi, 2014, Investigation of nanofluid mixed convection in a shallow cavity using a two-phase mixture model, Int. J. Therm. Sci., 75, 204, 10.1016/j.ijthermalsci.2013.08.003
Maleki, 2018, Heat transfer and fluid flow of pseudo-plastic nanofluid over a moving permeable plate with viscous dissipation and heat absorption/generation, J. Thermal Anal. Calorim.
Shadlaghani, 2018, Numerical investigation of serrated fins on natural convection from concentric and eccentric annuli with different cross sections, J. Thermal Anal. Calorim.
Safaei, 2014, Investigation of heat transfer enhancement in a forward-facing contracting channel using FMWCNT nanofluids, Numer. Heat Transfer A, 66, 1321, 10.1080/10407782.2014.916101
Alrashed, 2018, Electro-and thermophysical properties of water-based nanofluids containing copper ferrite nanoparticles coated with silica: Experimental data, modeling through enhanced ANN and curve fitting, Int. J. Heat Mass Transfer, 127, 925, 10.1016/j.ijheatmasstransfer.2018.07.123
Karimipour, 2018, Synthesized CuFe2O4/SiO2 nanocomposites added to water/EG: Evaluation of the thermophysical properties beside sensitivity analysis & EANN, Int. J. Heat Mass Transfer, 127, 1169, 10.1016/j.ijheatmasstransfer.2018.08.112
Nikkhah, 2015, Forced convective heat transfer of water/functionalized multi-walled carbon nanotube nanofluids in a microchannel with oscillating heat flux and slip boundary condition, Int. Commun. Heat Mass Transfer, 68, 69, 10.1016/j.icheatmasstransfer.2015.08.008
Karimipour, 2014, Mixed convection of copper–water nanofluid in a shallow inclined lid driven cavity using the lattice Boltzmann method, Physica A, 402, 150, 10.1016/j.physa.2014.01.057
Goodarzi, 2014, Comparison of the finite volume and lattice Boltzmann methods for solving natural convection heat transfer problems inside cavities and enclosures, vol. 2014
Safaei, 2014, Investigation of micro-and nanosized particle erosion in a 90°pipe bend using a two-phase discrete phase model, Sci. World J., 2014, 10.1155/2014/740578
Goodarzi, 2014, Numerical study of entropy generation due to coupled laminar and turbulent mixed convection and thermal radiation in an enclosure filled with a semitransparent medium, Sci. World J., 2014, 10.1155/2014/761745
Khodabandeh, 2018, Application of nanofluid to improve the thermal performance of horizontal spiral coil utilized in solar ponds: Geometric study, Renew. Energy, 122, 1, 10.1016/j.renene.2018.01.023
Heydari, 2018, The effect of attack angle of triangular ribs on heat transfer of nanofluids in a microchannel, J. Thermal Anal. Calorim., 131, 2893, 10.1007/s10973-017-6746-x
Behnampour, 2017, Analysis of heat transfer and nanofluid fluid flow in microchannels with trapezoidal, rectangular and triangular shaped ribs, Physica E, 91, 15, 10.1016/j.physe.2017.04.006
Akbari, 2016, A modified two-phase mixture model of nanofluid flow and heat transfer in a 3-D curved microtube, Adv. Powder Technol., 27, 2175, 10.1016/j.apt.2016.08.002
Ahmadi, 2017, Solar parallel feed water heating repowering of a steam power plant: A case study in iran, Renew. Sustain. Energy Rev., 77, 474, 10.1016/j.rser.2017.04.019
Khodabandeh, 2017, Experimental and numerical investigations on heat transfer of a water-cooled lance for blowing oxidizing gas in an electrical arc furnace, Energy Convers. Manage., 148, 43, 10.1016/j.enconman.2017.05.057
Toghraie, 2018, Numerical investigation of flow and heat transfer characteristics in smooth, sinusoidal and zigzag-shaped microchannel with and without nanofluid, J. Thermal Anal. Calorim., 131, 1757, 10.1007/s10973-017-6624-6
Mashayekhi, 2017, Application of a novel conical strip insert to improve the efficacy of water–Ag nanofluid for utilization in thermal systems: A two-phase simulation, Energy Convers. Manage., 151, 573, 10.1016/j.enconman.2017.09.025
Afrand, 2017, Using a magnetic field to reduce natural convection in a vertical cylindrical annulus, Int. J. Therm. Sci., 118, 12, 10.1016/j.ijthermalsci.2017.04.012
Ahmadi, 2017, Efficiency improvement of a steam power plant through solar repowering, Int. J. Exergy, 22, 158, 10.1504/IJEX.2017.083015
Sajadifar, 2017, Fluid flow and heat transfer of non-Newtonian nanofluid in a microtube considering slip velocity and temperature jump boundary conditions, Eur. J. Mech. B Fluids, 61, 25, 10.1016/j.euromechflu.2016.09.014
Akbari, 2017, Investigation of volume fraction of nanoparticles effect and aspect ratio of the twisted tape in the tube, J. Thermal Anal. Calorim., 129, 1911, 10.1007/s10973-017-6372-7
Afrand, 2017, Experimental study on thermal conductivity of ethylene glycol containing hybrid nano-additives and development of a new correlation, Appl. Therm. Eng., 110, 1111, 10.1016/j.applthermaleng.2016.09.024
Goodarzi, 2018, Develop the nano scale method of lattice Boltzmann to predict the fluid flow and heat transfer of air in the inclined lid driven cavity with a large heat source inside, two case studies: Pure natural convection & mixed convection, Physica A, 509, 210, 10.1016/j.physa.2018.06.013
Mahmoodi, 2015, Magneto-natural convection in square cavities with a source–sink pair on different walls, Int. J. Appl. Electromagn. Mech., 47, 21, 10.3233/JAE-130097
Esfe, 2014, Numerical simulation of natural convection around an obstacle placed in an enclosure filled with different types of nanofluids, Heat Transfer Res., 45, 279
Esfandiary, 2016, Natural convection of Al2O3–water nanofluid in an inclined enclosure with the effects of slip velocity mechanisms: Brownian motion and thermophoresis phenomenon, Int. J. Therm. Sci., 105, 137, 10.1016/j.ijthermalsci.2016.02.006
Karimipour, 2017, The effects of different nano particles of Al2O3 and Ag on the MHD nano fluid flow and heat transfer in a microchannel including slip velocity and temperature jump, Physica E, 86, 146, 10.1016/j.physe.2016.10.015
Akbari, 2017, An experimental study on rheological behavior of ethylene glycol based nanofluid: Proposing a new correlation as a function of silica concentration and temperature, J. Molecular Liquids, 233, 352, 10.1016/j.molliq.2017.03.020
Esfe, 2014, Mixed-convection flow in a lid-driven square cavity filled with a nanofluid with variable properties: Effect of the nanoparticle diameter and of the position of a hot obstacle, Heat Transfer Res., 45, 563, 10.1615/HeatTransRes.2014007271
Afrand, 2016, The variations of heat transfer and slip velocity of FMWNT-water nano-fluid along the micro-channel in the lack and presence of a magnetic field, Physica E, 84, 474, 10.1016/j.physe.2016.07.013
Esfe, 2013, Combined convection in a lid-driven cavity with an inside obstacle subjected to Al2O3-water nanofluid: Effect of solid volume fraction and nanofluid variable properties, Acta Phys. Pol. A, 124, 665, 10.12693/APhysPolA.124.665
Esfe, 2014, Mixed convection flow and heat transfer in a ventilated inclined cavity containing hot obstacles subjected to a nanofluid, Heat Transfer Res., 45, 309, 10.1615/HeatTransRes.2013006880
Zareie, 2017, Hybrid nanoparticles effects on rheological behavior of water-EG coolant under different temperatures: An experimental study, J. Molecular Liquids, 230, 408, 10.1016/j.molliq.2017.01.043
Afshari, 2018, Experimental investigation of rheological behavior of the hybrid nanofluid of MWCNT–alumina/water (80%)–ethylene-glycol (20%), J. Thermal Anal. Calorim., 132, 1001, 10.1007/s10973-018-7009-1
Khodadadi, 2018, Effects of nanoparticles to present a statistical model for the viscosity of MgO-water nanofluid, Powder Technol., 342, 166, 10.1016/j.powtec.2018.09.076
Balootaki, 2018, Nano scale lattice Boltzmann method to simulate the mixed convection heat transfer of air in a lid-driven cavity with an endothermic obstacle inside, Physica A, 508, 681, 10.1016/j.physa.2018.05.141
Aghakhani, 2018, Numerical investigation of heat transfer in a power-law non-Newtonian fluid in a C-shaped cavity with magnetic field effect using finite difference lattice Boltzmann method, Comput. & Fluids, 176, 51, 10.1016/j.compfluid.2018.09.012
