A novel hyperbranched polyurethane/nTiO2 waterborne sizing agent for improving UV-resistance and interfacial properties of SCF/PA6 composites

Yao, 2018, Recent advances in carbon-fiber-reinforced thermoplastic composites: a review, Compos. B Eng., 142, 241, 10.1016/j.compositesb.2017.12.007 Zhang, 2020, Effects of strain rate and high temperature environment on the mechanical performance of carbon fiber reinforced thermoplastic composites fabricated by hot press molding, Compos. Appl. Sci. Manuf., 134, 105905, 10.1016/j.compositesa.2020.105905 Kazemi, 2020, Low-velocity impact behaviors of a fully thermoplastic composite laminate fabricated with an innovative acrylic resin, Compos. Struct., 250, 112604, 10.1016/j.compstruct.2020.112604 Brahma, 2019, Comparison and characterization of discontinuous carbon fiber liquid-molded nylon to hydroentanglement/compression-molded composites, J. Thermoplast. Compos. Mater., 33, 1078, 10.1177/0892705718817346 Cho, 2020, Enhancement in mechanical properties of polyamide 66-carbon fiber composites containing graphene oxide-carbon nanotube hybrid nanofillers synthesized through in situ interfacial polymerization, Compos. Appl. Sci. Manuf., 135, 105938, 10.1016/j.compositesa.2020.105938 Yan, 2020, Interfacial enhancement of CF/PEEK composites by modifying water-based PEEK-NH2 sizing agent, Compos. B Eng., 199, 108258, 10.1016/j.compositesb.2020.108258 Gao, 2016, Interfacial microstructure and enhanced mechanical properties of carbon fiber composites caused by growing generation 1-4 dendritic poly(amidoamine) on a fiber surface, Langmuir, 32, 8339, 10.1021/acs.langmuir.6b01485 Ma, 2014, Interfacial properties and impact toughness of dendritic hexamethylenetetramine functionalized carbon fiber with varying chain lengths, RSC Adv., 4, 39156, 10.1039/C4RA04939J Yan, 2019, One-step electrodeposition of Cu/CNT/CF multiscale reinforcement with substantially improved thermal/electrical conductivity and interfacial properties of epoxy composites, Compos. Appl. Sci. Manuf., 125, 105530, 10.1016/j.compositesa.2019.105530 Li, 2013, Effect of plasma modification on the mechanical properties of carbon fiber/phenolphthalein polyaryletherketone composites, Polym. Compos., 34, 368, 10.1002/pc.22385 Tiwari, 2011, Gamma radiation treatment of carbon fabric to improve the fiber–matrix adhesion and tribo-performance of composites, Wear, 271, 2184, 10.1016/j.wear.2010.11.032 Zhang, 2018, Effect of polyurethane sizing on carbon fibers surface and interfacial adhesion of fiber/polyamide 6 composites, J. Appl. Polym. Sci., 135, 46111, 10.1002/app.46111 Zhang, 2018, Effect of hybrid sizing with nano-SiO2 on the interfacial adhesion of carbon fibers/nylon 6 composites, Colloid. Surface. Physicochem. Eng. Aspect., 553, 125, 10.1016/j.colsurfa.2018.05.050 Loh, 2020, Thermoplastic polyurethane-cellulose nanocomposite for transparent armour: characterisation of adhesion and thermal aging, Compos. Commun., 22, 100465, 10.1016/j.coco.2020.100465 Peng, 2020, Effect of a lignin-based polyurethane on adhesion properties of asphalt binder during UV aging process, Construct. Build. Mater., 247, 118547, 10.1016/j.conbuildmat.2020.118547 Zhang, 2018, Study on the interfacial properties of the dual-activity silicone resin/carbon fibers composites, Compos. Sci. Technol., 165, 347, 10.1016/j.compscitech.2018.07.012 Qian, 2015, Lignin reverse Micelles for UV-absorbing and high mechanical performance thermoplastics, Ind. Eng. Chem. Res., 54, 12025, 10.1021/acs.iecr.5b03360 Nagasawa, 2018, Atmospheric-pressure plasma-enhanced chemical vapor deposition of UV-shielding TiO2 coatings on transparent plastics, Mater. Lett., 228, 479, 10.1016/j.matlet.2018.06.053 Che, 2010, Preparation of nano-TiO2/polyurethane emulsions via in situ RAFT polymerization, Prog. Org. Coating, 69, 534, 10.1016/j.porgcoat.2010.09.013 Charpentier, 2012, Nano-TiO2/polyurethane composites for antibacterial and self-cleaning coatings, Nanotechnology, 23, 425606, 10.1088/0957-4484/23/42/425606 Zhu, 2018, Biomimetic polyurethane/TiO2 nanocomposite scaffolds capable of promoting biomineralization and mesenchymal stem cell proliferation, Mater. Sci. Eng C, Mater. Biol. Appl., 85, 79, 10.1016/j.msec.2017.12.008 He, 2011, Facile and efficient route to polyimide-TiO2 nanocomposite coating onto carbon fiber, ACS Appl. Mater. Interfaces, 3, 4744, 10.1021/am201239h Zhang, 2019, Preparation and properties of waterborne polyurethane with star-shaped hyperbranched structure, Polymer, 180, 121690, 10.1016/j.polymer.2019.121690 Liu, 2018, Improved wettability and interfacial adhesion in carbon fibre/epoxy composites via an aqueous epoxy sizing agent, Compos. Appl. Sci. Manuf., 112, 337, 10.1016/j.compositesa.2018.06.026 Patterson, 2016, Enhanced interfacial strength and UV shielding of aramid fiber composites through ZnO nanoparticle sizing, ACS Appl. Mater. Interfaces, 8, 33963, 10.1021/acsami.6b07555 Chen, 2016, Hierarchical poly(p-phenylene benzobisoxazole)/graphene oxide reinforcement with multifunctional and biomimic middle layer, Compos. Appl. Sci. Manuf., 88, 123, 10.1016/j.compositesa.2016.05.017