A novel dry processing technique to construct a high-performance superfine diamond grinding wheel with thermal and material characterizations

Pei, 2008, Grinding of silicon wafers: a review from historical perspectives, Int J Mach Tools Manuf, 48, 1297, 10.1016/j.ijmachtools.2008.05.009 Dai, 2015, Understanding the effects of grinding speed and undeformed chip thickness on the chip formation in high-speed grinding, Int J Adv Manuf Technol, 81, 995, 10.1007/s00170-015-7265-1 Segal, 2012, Material history learning from silicon, Nature, 483, S43, 10.1038/483S43a Nakajima, 2005, Shaped silicon-crystal wafers obtained by plastic deformation and their application to silicon-crystal lenses, Nat Mater, 4, 47, 10.1038/nmat1282 Zhang, 2006, A grinding-based manufacturing method for silicon wafers: generation mechanisms of central dimples on ground wafers, Int J Mach Tools Manuf, 46, 397, 10.1016/j.ijmachtools.2005.05.008 Huo, 2012, A new kinematics for ultra precision grinding of conical surfaces using a rotary table and a cup wheel, Int J Mach Tools Manuf, 59, 34, 10.1016/j.ijmachtools.2012.03.008 Zhang, 2016, A novel approach of chemical mechanical polishing using environment-friendly slurry for mercury cadmium telluride semiconductors, Sci Rep, 6, 22466, 10.1038/srep22466 Zhang, 2015, Deformation twinning evolution from a single crystal in a face-centered-cubic ternary alloy, Sci Rep, 5, 11290, 10.1038/srep11290 Zong, 2008, XPS analysis of the groove wearing marks on flank face of diamond tool in nanometric cutting of silicon wafer, Int J Mach Tools Manuf, 48, 1678, 10.1016/j.ijmachtools.2008.06.008 Huang, 2008, Characteristics of silicon substrates fabricated using nanogrinding and chemo-mechanical-grinding, Mater Sci Eng A, 479, 373, 10.1016/j.msea.2007.06.061 Li, 2006, Simultaneous double side grinding of silicon wafers: a literature review, Int J Mach Tools Manuf, 46, 1449, 10.1016/j.ijmachtools.2005.09.011 Zarudi, 1998, Effect of ultraprecision grinding on the microstructural change in silicon monocrystals, J Mater Process Technol, 84, 149, 10.1016/S0924-0136(98)00090-9 Wang, 2007, Formation mechanism of nanocrystalline high-pressure phases in silicon during nanogrinding, Nanotechnology, 18, 10.1088/0957-4484/18/46/465705 Young, 2006, Surface integrity of silicon wafers in ultra precision machining, Int J Adv Manuf Technol, 29, 372, 10.1007/s00170-005-2508-1 Luo, 2009, An experimental study of flat fixed abrasive grinding of silicon wafers using resin-bonded diamond pellets, J Mater Process Technol, 209, 686, 10.1016/j.jmatprotec.2008.02.039 Zhang, 2011, Grinding of silicon wafers using an ultrafine diamond wheel of a hybrid bond material, Int J Mach Tools Manuf, 51, 18, 10.1016/j.ijmachtools.2010.10.006 Zhang, 2015, Changes in surface layer of silicon wafers from diamond scratching, CIRP Ann Manuf Technol, 64, 349, 10.1016/j.cirp.2015.04.005 Zhang, 2015, A novel approach of high speed scratching on silicon wafers at nanoscale depths of cut, Sci Rep, 5, 16395, 10.1038/srep16395 Ding, 2013, Fabrication and performance of porous metal-bonded CBN grinding wheels using alumina bubble particles as pore-forming agents, Int J Adv Manuf Technol, 67, 1309, 10.1007/s00170-012-4567-4 Zarudi, 2003, Microstructures of phases in indented silicon: a high resolution characterization, Appl Phys Lett, 82, 874, 10.1063/1.1544429 Wong, 2015, Phase transformation as the single-mode mechanical deformation of silicon, Appl Phys Lett, 106, 10.1063/1.4923205 Takagi, 2008, TEM and HRTEM observations of microstructural change of silicon single crystal scratched under very small loading forces by AFM, Mater Trans, 49, 1298, 10.2320/matertrans.MRA2008017 Gassilloud, 2005, Deformation mechanisms of silicon during nanoscratching, Phys Status Solidi (a), 202, 2858, 10.1002/pssa.200521259 Wu, 2010, Nanoscratchinduced phase transformation of monocrystalline si, Scr Mater, 63, 847, 10.1016/j.scriptamat.2010.06.034 Yan, 2015, Effects of titania films on the oxidation resistance and dispersibility of ultrafine diamond, Mater Lett, 141, 92, 10.1016/j.matlet.2014.11.039 Miao, 2016, Synthesis and application of titania-coated ultrafine diamond abrasive particles, Ceram Int, 42, 8884, 10.1016/j.ceramint.2016.02.139 Khalilnezhad, 2014, Effect of nanodiamond surface functionalization using oleylamine on the scratch behavior of polyacrylic/nanodiamond nanocomposite, Diam Relat Mater, 45, 7, 10.1016/j.diamond.2014.03.002 Kim, 2011, Photocatalytic decomposition of toluene by nanodiamond-supported TiO2 prepared using atomic layer deposition, Appl Catal A Gen, 408, 148, 10.1016/j.apcata.2011.09.019 Zhang, 2012, PEGylation and polyPEGylation of nanodiamond, Polymer, 53, 3178, 10.1016/j.polymer.2012.05.029 Zhao, 2019, Pore structure design and grinding performance of porous metal-bonded CBN abrasive wheels fabricated by vacuum sintering, J ManufProcess, 44, 125 Tanaka, 2004, Development and application of porous vitrified-bonded wheel with ultra-fine diamond abrasives, Key Eng Mater, 257–258, 251, 10.4028/www.scientific.net/KEM.257-258.251 Zhou, 2017, Ultraprecision grinding of silicon wafers using a newly developed diamond wheel, Mater Sci Semicond Process, 68, 238, 10.1016/j.mssp.2017.06.031 Zhao, 2013, Preparation of silica-coated ultrafine diamond and dispersion in ceramicmatrix, Mater Lett, 113, 134, 10.1016/j.matlet.2013.09.052 Lu, 2017, The effects of SiO 2 coating on diamond abrasives in sol-gel tool for SiC substrate polishing, Diam Relat Mater, 76, 123, 10.1016/j.diamond.2017.05.003 Mochalin, 2012, The properties and applications of nanodiamonds, Nat Nanotechnol, 7, 11, 10.1038/nnano.2011.209 Li, 2012, A study on pore-forming agent in the resin bond diamond wheel used for silicon wafer back-grinding, Procedia Eng, 36, 322, 10.1016/j.proeng.2012.03.047 Yang, 2016, A study on diamond grinding wheels with regular grain distribution using additive manufacturing (AM) technology, Mater Des, 104, 292, 10.1016/j.matdes.2016.04.104 Zhao, 2017, A review on metallic porous materials: pore formation, mechanical properties, and their applications, Int J Adv Manuf Technol, 95, 2641, 10.1007/s00170-017-1415-6 Miao, 2020, Modified gel casting technique to fabricate honeycomb structured vitrified bonded ultrafine diamond grinding wheels, Ceram Int, 46, 4462, 10.1016/j.ceramint.2019.10.172 Wang, 2018, New deformation-induced nanostructure in silicon, Nano Lett, 18, 4611, 10.1021/acs.nanolett.8b01910 Zhang, 2022, Origin and evolution of a crack in silicon induced by a single grain grinding, J Manuf Process, 75, 617, 10.1016/j.jmapro.2022.01.037 Pei, 2001, Alan strasbaugh, fine grinding of silicon wafers, Int J Mach Tools Manuf, 41, 659, 10.1016/S0890-6955(00)00101-2 Zhang, 2012, Fabrication and size prediction of crystalline nanoparticles of silicon induced by nanogrinding with ultrafine diamond grits, Scr Mater, 67, 657, 10.1016/j.scriptamat.2012.07.016 Zhang, 2012, A novel model for undeformed nanometer chips of soft-brittle HgCdTe films induced by ultrafine diamond grits, Scr Mater, 67, 197, 10.1016/j.scriptamat.2012.04.017 Zhang, 2013, A model for nanogrinding based on direct evidence of ground chips of silicon wafers, Sci China Technol Sci, 56, 2099, 10.1007/s11431-013-5286-2 Zhang, 2017, A novel approach of mechanical chemical grinding, J Alloys Compd, 726, 514, 10.1016/j.jallcom.2017.08.024 Leśniak, 2017, Thermal characterisation of raw aluminosilicate glazes in SiO2–Al2O3–CaO–K2O–Na2O–ZnO system with variable content of ZnO, J Therm Anal Calorim, 128, 1343, 10.1007/s10973-016-6085-3 Zhang, 2017, A novel approach of high-performance grinding using developed diamond wheels, Int J Adv Manuf Technol, 91, 3315, 10.1007/s00170-017-0037-3 Zhou, 2011, A study on the diamond grinding of ultra-thin silicon wafers, Proc IMechE B J Eng Manuf, 226, 66, 10.1177/0954405411414768