A novel dielectric fluid immersion cooling technology for Li-ion battery thermal management

Liu, 2017, Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review, Energy Convers Manage, 150, 304, 10.1016/j.enconman.2017.08.016

Patil M, Panchal S, Kim N, Lee M-Y. Cooling Performance Characteristics of 20 Ah Lithium-Ion Pouch Cell with Cold Plates along Both Surfaces. Energies 2018; 11: 2550. https://doi.org/10.3390/en11102550.

Patil, 2020, Investigation on thermal performance of water-cooled Li-ion pouch cell and pack at high discharge rate with U-turn type microchannel cold plate, Int J Heat Mass Transf, 155, 119728, 10.1016/j.ijheatmasstransfer.2020.119728

Du, 2017, An investigation of irreversible heat generation in lithium ion batteries based on a thermo-electrochemical coupling method, Appl Therm Eng, 121, 501, 10.1016/j.applthermaleng.2017.04.077

Liu, 2020, Self-adapting J-type air-based battery thermal management system via model predictive control, Appl Energy, 263, 114640, 10.1016/j.apenergy.2020.114640

Patil, 2020, Numerical study on sensitivity analysis of factors influencing liquid cooling with double cold-plate for lithium-ion pouch cell, Int J Energy Res, 1

Qin, 2019, Experimental and numerical study on a novel hybrid battery thermal management system integrated forced-air convection and phase change material, Energy Convers Manage, 195, 1371, 10.1016/j.enconman.2019.05.084

Wu, 2017, Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system, Energy Convers Manage, 138, 486, 10.1016/j.enconman.2017.02.022

Siddique, 2018, A comprehensive review on a passive (phase change materials) and an active (thermoelectric cooler) battery thermal management system and their limitations, J Power Sources, 401, 224, 10.1016/j.jpowsour.2018.08.094

Zhao, 2014, An experimental study of lithium ion battery thermal management using flexible hydrogel films, J Power Sources, 255, 29, 10.1016/j.jpowsour.2013.12.138

Panchal, 2019, Heat and mass transfer modeling and investigation of multiple LiFePO4/graphite batteries in a pack at low C-rates with water-cooling, Int J Heat Mass Transf, 135, 368, 10.1016/j.ijheatmasstransfer.2019.01.076

Chen, 2016, Comparison of different cooling methods for lithium ion battery cells, Appl Therm Eng, 94, 846, 10.1016/j.applthermaleng.2015.10.015

Sundin, 2020, Thermal management of li-ion batteries with single-phase liquid immersion cooling, IEEE Open J Veh Technol, 1, 82, 10.1109/OJVT.2020.2972541

Patil, 2016, A novel design for lithium ion battery cooling using mineral oil, Adv Sci Technol Lett, 141, 164, 10.14257/astl.2016.141.34

Seo, 2017, Numerical study on the cooling performances of various cooling methods for laminated type battery, Proc Asian Conf Therm Sci

Park, 2013, Battery cell arrangement and heat transfer fluid effects on the parasitic power consumption and the cell temperature distribution in a hybrid electric vehicle, J Power Sources, 227, 191, 10.1016/j.jpowsour.2012.11.039

Karimi, 2014, Thermal analysis of high-power lithium-ion battery packs using flow network approach: Thermal management of a high-power Li-ion battery pack, Int J Energy Res, 38, 1793, 10.1002/er.3173

M&I Materials Limited. MIVOLT LIQUID IMMERSION COOLING, Dielectric fluids for safer, cooler, greener high performance EV batteries. 2020. https://mivoltcooling.com/downloads/MIVOLT-Battery-Brochure.pdf (accessed July 29, 2020).

M&I Materials Ltd. I-CoBat : Immersion-Cooled Battery 2020. https://gtr.ukri.org/projects?ref=105305 (accessed July 29, 2020).

3MTM NovecTM 7000 Engineered Fluid 2020. https://multimedia.3m.com/mws/media/121372O/3m-novec-7000-engineered-fluid-tds.pdf (accessed August 7, 2020).

XING - Immersio 2020. https://www.xingmobility.com/immersio-battery-system (accessed July 29, 2020).

Kim G-H, Pesaran A. Battery Thermal Management Design Modeling. World Electr Veh J 2007; 1:126–33. https://doi.org/10.3390/wevj1010126.

Deng, 2018, Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review, Appl Therm Eng, 142, 10, 10.1016/j.applthermaleng.2018.06.043

Johnson N, Meyring W, Rivers. Application of Fluid Protection for Increased Safety and Efficiency of Lithium-Ion Battery and Electronic Devices n.d. https://nfpa.org/-/media/Files/News-and-Research/Resources/Research-Foundation/Symposia/2016-SUPDET/2016-Papers/SUPDET2016Smith.ashx (accessed July 28, 2020).

Hunt, 2016, Surface cooling causes accelerated degradation compared to tab cooling for lithium-ion pouch cells, J Electrochem Soc, 163, A1846, 10.1149/2.0361609jes

Thesis P, Zhao Y. A combined experimental and modelling study for understanding lithium ion behaviour under complex thermal boundary conditions and cell design optimisation. 2019.

Zhao, 2018, Modeling the effects of thermal gradients induced by tab and surface cooling on lithium ion cell performance, J Electrochem Soc, 165, A3169, 10.1149/2.0901813jes

Feng, 2018, Thermal runaway mechanism of lithium ion battery for electric vehicles: A review, Energy Storage Mater, 10, 246, 10.1016/j.ensm.2017.05.013

Zhang, 2020, Computational identification of the safety regime of Li-ion battery thermal runaway, Appl Energy, 261, 114440, 10.1016/j.apenergy.2019.114440

ANSYS Inc, 2018, Release 19.1, Help System, Theory Guide

Kim, 2011, Multi-domain modeling of lithium-ion batteries encompassing multi-physics in varied length scales, J Electrochem Soc, 158, A955, 10.1149/1.3597614

Zhang, 2020, Thermal analysis of a 6s4p Lithium-ion battery pack cooled by cold plates based on a multi-domain modeling framework, Appl Therm Eng, 173, 115216, 10.1016/j.applthermaleng.2020.115216

Tran, 2020, Effect of integrating the hysteresis component to the equivalent circuit model of Lithium-ion battery for dynamic and non-dynamic applications, J Storage Mater, 32, 101785

Panchal, 2017, Transient electrochemical heat transfer modeling and experimental validation of a large sized LiFePO4/graphite battery, Int J Heat Mass Transf, 109, 1239, 10.1016/j.ijheatmasstransfer.2017.03.005

Kim, 2009, Modeling for the scale-up of a lithium-ion polymer battery, J Power Sources, 189, 841, 10.1016/j.jpowsour.2008.10.019

Yi, 2013, Three-dimensional thermal modeling of a lithium-ion battery considering the combined effects of the electrical and thermal contact resistances between current collecting tab and lead wire, J Electrochem Soc, 160, A437, 10.1149/2.039303jes

Kwon, 2006, A two-dimensional modeling of a lithium-polymer battery, J Power Sources, 163, 151, 10.1016/j.jpowsour.2006.03.012

Kim, 2008, Effect of electrode configuration on the thermal behavior of a lithium-polymer battery, J Power Sources, 180, 909, 10.1016/j.jpowsour.2007.09.054

Yi, 2013, Modeling the temperature dependence of the discharge behavior of a lithium-ion battery in low environmental temperature, J Power Sources, 244, 143, 10.1016/j.jpowsour.2013.02.085

Hatchard, 2001, Thermal model of cylindrical and prismatic lithium-ion cells, J Electrochem Soc, 148, A755, 10.1149/1.1377592

A123 systems. Cell Applications – Integrated Lithium-ion Applications | A123 Systems n.d. http://www.a123systems.com/automotive/products/cells/ (accessed July 25, 2020).

Panchal S, Mathewson S, Fraser R, Culham R, Fowler M. Experimental Measurements of Thermal Characteristics of LiFePO4 Battery. SAE Tech. Pap., vol. 2015- April, SAE International; 2015. https://doi.org/10.4271/2015-01-1189.

Lin, 2015, Thermal analysis of large-capacity LiFePO4 power batteries for electric vehicles, J Power Sources, 294, 633, 10.1016/j.jpowsour.2015.06.129

Neupane S, Alipanah M, Barnes D, Li X. Heat Generation Characteristics of LiFePO4 Pouch Cells with Passive Thermal Management. Energies 2018;11:1243. https://doi.org/10.3390/en11051243.

Bazinski, 2016, Measuring and assessing the effective in-plane thermal conductivity of lithium iron phosphate pouch cells, Energy, 114, 1085, 10.1016/j.energy.2016.08.087

Wei, 2020, A comprehensive study on thermal conductivity of the lithium‐ion battery, Int J Energy Res, 44, 9466, 10.1002/er.5016

Wu, 2015, Thermal design for the pouch-type large-format lithium-ion batteries: I. Thermo-electrical modeling and origins of temperature non-uniformity, J Electrochem Soc, 162, A181, 10.1149/2.0831501jes

Bai, 2017, Thermal management performances of PCM/water cooling-plate using for lithium-ion battery module based on non-uniform internal heat source, Appl Therm Eng, 126, 17, 10.1016/j.applthermaleng.2017.07.141

Li, 2019, Experiment and simulation for pouch battery with silica cooling plates and copper mesh based air cooling thermal management system, Appl Therm Eng, 146, 866, 10.1016/j.applthermaleng.2018.10.061

Saw, 2016, Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling, Appl Energy, 177, 783, 10.1016/j.apenergy.2016.05.122

Fan, 2013, A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles, J Power Sources, 238, 301, 10.1016/j.jpowsour.2013.03.050

Li, 2019, Three-dimensional thermal modeling of Li-ion battery cell and 50 V Li-ion battery pack cooled by mini-channel cold plate, Appl Therm Eng, 147, 829, 10.1016/j.applthermaleng.2018.11.009

Liu, 2020, Comparative study on substitute triggering approaches for internal short circuit in lithium-ion batteries, Appl Energy, 259, 114143, 10.1016/j.apenergy.2019.114143