A novel approach to testing the dynamic shear response of Ti-6Al-4V

Wright, 2002

Bai, 1992

Hopkinson, 1914, A method of measuring the pressure in the deformation of high explosives by the impact of bullets, Philosophical Transactions of the Royal Society of London A, 213, 437, 10.1098/rsta.1914.0010

Kolsky, H., An investigation of the mechanical properties of materials at very rates of loading. In: Proceedings of the Physical Society B, London, 1949.

Harding, 1960, Tensile testing of materials at impact rates of strain, Journal of Mechanical Engineering Science, 2, 88, 10.1243/JMES_JOUR_1960_002_016_02

Duffy, 1971, On the use of a torsional split Hopkinson bar to study rate effects in 1100-0 aluminium, Journal of Applied Mechanics, 38, 83, 10.1115/1.3408771

Ferguson, 1967, The dynamic punching of metals, dislocation damping in zinc single crystals, British Journal of Applied Physics, 18, 411, 10.1088/0508-3443/18/4/304

Compbell, 1970, The temperature and strain rate dependence of shear strength of mild steel, Philosophical Magazine, 21, 63, 10.1080/14786437008238397

Harding, J. and Huddart, J., The use of the double-notch shear test in determining the mechanical properties of uranium at very high rates of strain. In: Proc. 2nd International Conf. Mechanical properties at high rates of strain, 1979: 13.

Nemat-Nasser, S., ed., Mechanical Testing and Evaluation. ASM Metals Handbook, ASM International, 2000: 991-992.

Klepaczko, 1994, An experimental technique for shear testing at high and very high strain rates. The case of a mild steel, International Journal of Impact Engineering, 15, 25, 10.1016/S0734-743X(05)80005-3

Rusinek, 2001, Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress, International Journal of Plasticity, 17, 87, 10.1016/S0749-6419(00)00020-6

Seo, 2005, Constitutive equation for Ti-6Al-4V at high temperatures measured using the SHPB technique, International Journal of Impact Engineering, 31, 20, 10.1016/j.ijimpeng.2004.04.010

Wang, 2007, Microstructure evolutin of adiabatic shear bands in TC16 titanium alloy, The Chinese Journal of Nonferrous Metals, 17, 1767

Meyers, 2003, Microstructural evolution in adiabatic shear localization in stainless steel, Acta Materialia, 51, 1307, 10.1016/S1359-6454(02)00526-8

Ranc, 2008, Temperature field measurement in titanium alloy during high strain rate loading-Adiabatic shear bands phenomenon, Mechanics of Materials, 40, 255, 10.1016/j.mechmat.2007.08.002