A novel approach in wood waste utilization for manufacturing of catalyst-free polyurethane-wood composites (PU-WC)

Bergeron, 2014, Assessment of the coherence of the Swiss waste wood management, Resour. Conserv. Recycl., 91, 62, 10.1016/j.resconrec.2014.07.011 European Union. Directive 2018/851 amending Directive 2008/98/EC on waste Framework. Off. J. Eur. Union 2018:(L-150/109–140). Girondi Delaqua, 2022, Incorporation of sludge from effluent treatment plant of an industrial laundry into heavy clay ceramics, J. Build Eng., 47 GUS, 2018, Rocznik Statystyczny Leśnictwa, Rsl, 370 Pelaez-Samaniego, 2013, A review of wood thermal pretreatments to improve wood composite properties, Wood Sci. Technol., 47, 1285, 10.1007/s00226-013-0574-3 Laskowska, 2017 Khan, 2020, A state-of-the-art review on particulate wood polymer composites: processing, properties and applications, Polym. Test., 89, 10.1016/j.polymertesting.2020.106721 Friedrich, 2021, Thermoplastic moulding of wood-polymer composites (WPC): a review on physical and mechanical behaviour under hot-pressing technique, Compos. Struct., 262, 10.1016/j.compstruct.2021.113649 Roig, 2018, Biocomposites for interior facades and partitions to improve air quality in new buildings and restorations, Reinf. Plast., 62, 270, 10.1016/j.repl.2017.07.003 Gardner, 2015, Wood–Plastic composite technology, Curr. For. Rep., 1, 139, 10.1007/s40725-015-0016-6 Hao, 2021, Interfacial adhesion mechanisms of ultra-highly filled wood fiber/polyethylene composites using maleic anhydride grafted polyethylene as a compatibilizer, Mater. Des., 212, 10.1016/j.matdes.2021.110182 Yang, 2012, Optimized material composition to improve the physical and mechanical properties of extruded wood–plastic composites (WPCs), Constr. Build. Mater., 29, 120, 10.1016/j.conbuildmat.2011.09.013 Zong, 2020, High-strength, lightweight, co-extruded wood flour-polyvinyl chloride/lumber composites: effects of wood content in shell layer on mechanical properties, creep resistance, and dimensional stability, J. Clean. Prod., 244, 10.1016/j.jclepro.2019.118860 Chun, 2019, Wood plastic composites made from post-used polystyrene foam and agricultural waste, J. Thermoplast. Compos. Mater., 32, 1455, 10.1177/0892705718799836 Chen, 2008, Dynamic mechanical properties of extruded nylon_wood composites, Polym. Compos., 29, 372, 10.1002/pc.20400 Diestel, 2018, Wood-based composites with thermoplastic polyurethane as matrix polymer, J. Appl. Polym. Sci., 135 Qiang, 2012, Polylactide-based wood plastic composites toughened with SBS, Polym.-Plast. Technol. Eng., 51, 193, 10.1080/03602559.2011.618518 Singh, 2007, Wood fiber reinforced bacterial bioplastic composites: fabrication and performance evaluation, Compos. Sci. Technol., 67, 1753, 10.1016/j.compscitech.2006.11.009 Chan, 2019, Mechanical and physical stability of polyhydroxyalkanoate (PHA)-based wood plastic composites (WPCs) under natural weathering, Polym. Test., 73, 214, 10.1016/j.polymertesting.2018.11.028 Gardner, 2015, Wood–plastic composite technology, Curr. For. Rep., 1, 139, 10.1007/s40725-015-0016-6 Fabiyi, 2011, Effects of wood species on durability and chemical changes of fungal decayed wood plastic composites, Compos Part A Appl. Sci. Manuf., 42, 501, 10.1016/j.compositesa.2011.01.009 Siwek, 2018, Influence of different wood flour fractions on the mechanical properties of injection molded WPC with cellulose propionate, Eur. J. Wood Wood Prod., 76, 499, 10.1007/s00107-017-1265-9 Zhou, 2022, Recycling end-of-life WPC products into ultra-high-filled, high-performance wood fiber/polyethylene composites: a sustainable strategy for clean and cyclic processing in the WPC industry, J. Mater. Res. Technol., 18, 1, 10.1016/j.jmrt.2022.02.091 Tang, 2022, Rheological behavior and mechanical properties of ultra-high-filled wood fiber/polypropylene composites using waste wood sawdust and recycled polypropylene as raw materials, Constr. Build. Mater., 351, 10.1016/j.conbuildmat.2022.128977 Chen, 2006, Harmful effects of formaldehyde and measures for reducing formaldehyde emission from wood-based panels, China Wood Ind., 20, 32 Kang, 2021, Formaldehyde exposure and leukemia risk: a comprehensive review and network-based toxicogenomic approach, Genes Environ, 43, 13, 10.1186/s41021-021-00183-5 Costa, 2019, Occupational exposure to formaldehyde and early biomarkers of cancer risk, immunotoxicity and susceptibility, Environ. Res., 179, 10.1016/j.envres.2019.108740 Olszewski, 2022, Synthesis and characterization of biopolyols through biomass liquefaction of wood shavings and their application in the preparation of polyurethane wood composites, Eur. J. Wood Wood Prod., 80, 57, 10.1007/s00107-021-01755-6 Akindoyo, 2016, Polyurethane types, synthesis and applications – a review, RSC Adv., 6, 114453, 10.1039/C6RA14525F Antonino, 2021, Reactivity of aliphatic and phenolic hydroxyl groups in kraft lignin towards 4,4′ MDI, Mol, 26, 2131, 10.3390/molecules26082131 Qiu, 2012, Modified cellulose films with controlled permeatability and biodegradability by crosslinking with toluene diisocyanate under homogeneous conditions, Carbohydr. Polym., 88, 1272, 10.1016/j.carbpol.2012.02.007 Kociszewski, 2012, Effect of industrial wood particle size on mechanical properties of wood-polyvinyl chloride composites, Eur. J. Wood Wood Prod., 70, 113, 10.1007/s00107-011-0531-5 Gozdecki, 2012, Mechanical properties of wood – polypropylene composites with industrial wood particles of different sizes, Wood Fiber Sci., 44, 14 Chaudemanche, 2018, Properties of an industrial extruded HDPE-WPC: the effect of the size distribution of wood flour particles, Constr. Build. Mater., 162, 543, 10.1016/j.conbuildmat.2017.12.061 Barbos, 2020, Development and characterization of WPCs produced with high amount of wood residue, J. Mater. Res. Technol., 9, 9684, 10.1016/j.jmrt.2020.06.073 Ayrilmis, 2017, Water absorption and mechanical properties of PP/HIPS hybrid composites filled with wood flour, Polym. Compos., 38, 863, 10.1002/pc.23647 Yeh, 2021, Effect of fiber size, cyclic moisture absorption and fungal decay on the durability of natural fiber composites, Constr. Build. Mater., 286, 10.1016/j.conbuildmat.2021.122819 Jiao, 2013, Thermal degradation characteristics of rigid polyurethane foam and the volatile products analysis with TG-FTIR-MS, Polym. Degrad. Stab., 98, 2687, 10.1016/j.polymdegradstab.2013.09.032 Hejna, 2018, Structure, mechanical, thermal and fire behavior assessments of environmentally friendly crude glycerol-based rigid polyisocyanurate foams, J. Polym. Environ., 26, 1854, 10.1007/s10924-017-1086-2 Yeoh, 2020, Production of biodegradable palm oil-based polyurethane as potential biomaterial for biomedical applications, Polymers (Basel), 12 Bodîrlǎu, 2007, Thermal investigation upon various composite materials, Rev. Roum. Chim., 52, 153 Sharma, 2015, Wood quality assessment of Pinus radiata (radiata pine) saplings by dynamic mechanical analysis, Wood Sci. Technol., 49, 1239, 10.1007/s00226-015-0769-x Startsev, 2017, Impact of moisture content on dynamic mechanical properties and transition temperatures of wood, Wood Mater. Sci. Eng., 12, 55, 10.1080/17480272.2015.1020566 Menard, 2015 Ashaduzzaman, 2020, Dynamic mechanical analysis of Scots pine and three tropical hardwoods, Int. Wood Prod. J., 11, 189, 10.1080/20426445.2020.1799910 Backman, 2001, Differences in wood material responses for radial and tangential direction as measured by dynamic mechanical thermal analysis, J. Mater. Sci., 36, 3777, 10.1023/A:1017986119559 Vimalanathan, 2016, Mechanical, dynamic mechanical, and thermal analysis of Shorea robusta-dispersed polyester composite, Int. J. Polym. Anal. Charact., 21, 314, 10.1080/1023666X.2016.1155818 Asdrubali, 2015, A review of unconventional sustainable building insulation materials, Sustain. Mater. Technol., 4, 1 Bledzki, 1999, Composites reinforced with cellulose, Prog. Polym. Sci., 24, 221, 10.1016/S0079-6700(98)00018-5 Wood Panel Industries Federation, 2014, 156 Ustaömer, 2020, Thermal and fire properties of medium-density fiberboard prepared with huntite/hydromagnesite and zinc borate, BioResources, 15, 5940, 10.15376/biores.15.3.5940-5950 Zahedsheijani, 2012, The effect of Na + montmorillonite (NaMMT) nanoclay on thermal properties of medium density fiberboard (MDF), Eur. J. Wood Wood Prod., 70, 565, 10.1007/s00107-011-0583-6