Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Một thiết bị thí nghiệm tích hợp HPHT mới để đo độ căng bề mặt, hệ số phình nở và độ nhớt đồng thời
Tóm tắt
Một thiết bị thí nghiệm đã được thiết kế để nghiên cứu sự tương tác giữa các tham số tiêm CO2. Đây là một hệ thống đo lường tích hợp kín với mục tiêu thu thập dữ liệu về độ căng bề mặt, hệ số phình nở và độ nhớt đồng thời. Thiết bị này đã được thử nghiệm thành công để đo các tính chất của dầu chết và dầu sống hòa trộn với CO2 trong môi trường áp suất cao và nhiệt độ cao. Một nghiên cứu thực nghiệm đã được hoàn thành sử dụng các mẫu từ các mỏ thật. Kết quả cho thấy sự nhất quán và đồng bộ giữa các tham số có thể được sử dụng để ước lượng áp suất hòa trộn tối thiểu (MMP) một cách đồ họa. MMP được coi là áp suất tại điểm giao nhau giữa hai đường thẳng.
Từ khóa
#CO2 #độ căng bề mặt #hệ số phình nở #độ nhớt #nghiên cứu thực nghiệm #áp suất hòa trộn tối thiểu #môi trường áp suất cao và nhiệt độ caoTài liệu tham khảo
Abdurrahman M, Permadi AK, Bae WS (2015) An improved method for estimating minimum miscibility pressure through condensation-extraction process under swelling tests. J Petrol Sci Eng 131:165–171. https://doi.org/10.1016/j.petrol.2015.04.033
Alomair O, Malallah A, Elsharkawy A, Iqbal M (2015) Prédiction de la pression miscibilité minimum (MMP) du CO2 en utilisant un algorithme basé sur l’ACE (Alternating Conditional Expectation). Oil Gas Sci Technol 70(6):967–982. https://doi.org/10.2516/ogst/2012097
Alston RB, Kokolis GP, James CF (1985) CO2 minimum miscibility pressure: a correlation for impure CO2 streams and live oil systems. Soc Petrol Eng J 25(2):268–274. https://doi.org/10.2118/11959-PA
Christiansen RL, Haines HK (1987) Rapid measurement of minimum miscibility pressure with the rising-bubble apparatus. SPE Reserv Eng 2(4):523–527. https://doi.org/10.2118/13114-PA
Ekundayo JM, Ghedan SG (2013) Minimum miscibility pressure measurement with slim tube apparatus—How unique is the value? SPE reservoir characterization and simulation conference and exhibition, 16–18 September, Abu Dhabi, UAE. https://doi.org/10.2118/165966-ms
Emera MK, Sarma HK (2006) A genetic algorithm-based model to predict CO2-Oil physical properties for dead and live oil. Canadian international petroleum conference. Calgary, Alberta, 13–15 June. https://doi.org/10.2118/2006-197
Enick RM, Holder GD, Morsi BI (1989) A thermodynamic correlation for the minimum miscibility pressure in CO2 flooding of petroleum reservoirs. SPE Reserv Eng 3(1):81–92. https://doi.org/10.2118/14518-pa
Flock DL, Nouar A (1984) Parametric analysis on the determination of the minimum miscibility pressure in slim tube displacements. J Can Pet Technol 23(5):80–88. https://doi.org/10.2118/84-05-12
Glaso OS (1985) Generalized minimum miscibility pressure correlation. Soc Petrol Eng J 25(6):927–934
Hand JL, Pinczewski WV (1990) Interpretation of swelling/extraction tests. SPE Reserv Eng 5(4):595–600. https://doi.org/10.2118/19471-PA
Holm LW (1987) Evolution of the carbon dioxide flooding processes. J Petrol Technol 39(11):1337–1342. https://doi.org/10.2118/17134-PA
Metcalfe RS (1982) Effects of impurities on minimum miscibility pressures and minimum enrichment levels for CO2 and rich-gas displacements. Soc Petrol Eng J 22(2):219–225. https://doi.org/10.2118/9230-PA
Mungan N (1981) Carbon dioxide flooding—fundamentals. J Can Pet Technol 20(1):87–92. https://doi.org/10.1007/978-94-009-6140-1_5
Orr FM, Jensen CM (1984) Interpretation of pressure-composition phase diagrams for CO2/crude-oil systems. Soc Petrol Eng J 24(5):485–497. https://doi.org/10.2118/11125-PA
Orr FM, Silva MK (1987) Effect of oil composition on minimum miscibility pressure—part 2: correlation. SPE Reserv Eng 2(4):479–491. https://doi.org/10.2118/14150-PA
Rao DN (1997) A new technique of vanishing interfacial tension for miscibility determination. Fluid Phase Equilib 139(1997):311–324
Rosman A, Zana E (1977) Experimental studies of low IFT displacement by CO2 injection. SPE annual technical conference and exhibition, Denver, CO, 9–12 October. https://doi.org/10.2523/6723-ms
Stalkup FI (1978) Carbon dioxide miscible flooding: past, present, and outlook for the future. J Petrol Technol 30(8):1102–1112. https://doi.org/10.2118/7042-PA
Stalkup FI, Lo LL, Dean RH (1990) Sensitivity to gridding of miscible flood predictions made with upstream differenced simulators. SPE/DOE enhanced oil recovery symposium, Tulsa, OK, 22–25 April. https://doi.org/10.2523/20178-ms
Stalkup FI (1987) Displacement behavior of the condensing/vaporizing gas drive process. SPE annual technical conference and exhibition, Dallas, TX, 27–30 September
Sugiharjo, Purnomo H (2009) Perubahan Sifat-sifat Fluida reservoir Pada Injeksi CO2. Lembaran Publikasi Lemigas vol. 43. No. 1, April
Tsau JS, Bui LH, Willhite GP (2010) Swelling/extraction test of a small sample size for phase behavior study. SPE symposium on improved oil recovery, Tulsa, OK, 24–28 April. https://doi.org/10.2523/129728-ms
Wang Y, Peck DG (2000) Analytical calculation of minimum miscibility pressure: comprehensive testing and its application in a quantitative analysis of the effect of numerical dispersion for different miscibility development mechanisms. SPE/DOE Improved oil recovery symposium, Tulsa, OK, 3–5 April. https://doi.org/10.2118/59378-ms
Yellig WF, Metcalfe RS (1980) Determination and prediction of CO2 minimum miscibility pressures. J Petrol Technol 32(01):160–168. https://doi.org/10.2118/7477-pa
Yuan H, Johns RT, Egwuenu AM, Dindoruk B (2004) Improved MMP correlations for CO2 floods using analytical gas flooding theory. SPE symposium on improved oil recovery, Tulsa, OK, 17–21 April
Zhang PY, Huang S, Sayegh S, Zhou XL (2004) Effect of CO2 impurities on gas-injection EOR processes. SPE symposium on improved oil recovery, Tulsa, OK, 17–21 April. https://doi.org/10.2523/89477-ms
Zick AA (1986) Combined condensing/vaporizing mechanism in the displacement of oil by enriched gases. SPE annual technical conference and exhibition, New Orleans, LA, 5–8 October. https://doi.org/10.2523/15493-ms