A new continuum-based constitutive model for the simulation of the inherent anisotropy of Opalinus clay

Amadei, 1996, Importance of anisotropy when estimating and measuring in situ stresses in rock, 293 Amann, F., C.D. Martin, and R. Thoeny. 2012. “Rock Mechanical Considerations Associated with the Construction of a Nuclear Waste Repository in Clay Rock.” In Proceedings of the 46th US Rock Mechanics/Geomechanics Symposium 2012. Vol. 11. Chicago: American Rock Mechanics Association, ARMA. https://www.onepetro.org/download/conference-paper/ARMA-2012-123?id=conference-paper%2FARMA-2012-123. Amann, 2011, Experimental study of the brittle behavior of clay shale in rapid unconfined compression, Rock Mech. Rock Eng., 44, 415, 10.1007/s00603-011-0156-3 Amann, 2017, Geomechanical behaviour of Opalinus Clay at multiple scales: results from Mont Terri rock laboratory, Swiss J. Geosci., 110, 151, 10.1007/s00015-016-0245-0 Blümling, P. and Heinz Konietzky. 2003. “Development of an Excavation Disturbed Zone in Claystone (Opalinus Clay).” In Int. Symposium on Geotechnical Measurements and Modelling. 23-25 September, edited by Natau, Fecker, and Pimentel, 127–32. Karlsruhe, Germany. Bock, H. 2001. “RA Experiment. Rock Mechanics Analyses and Synthesis: Data Report on Rock Mechanics. Technical Report 2000-02. Mont Terri Project”. Bock 2009. “RA Experiment. Updated Review of the Rock Mechanics Properties of the Opalinus Clay of the Mont Terri URL Based on Laboratory and Field Testing. Technical Report 2008-04. Mont Terri Project”. Bonnelye, 2017, Strength anisotropy of shales deformed under uppermost crustal conditions, J. Geophys. Res. Solid Earth, 122, 110, 10.1002/2016JB013040 Corkum, 2006 Favero, 2018, Anisotropic behaviour of opalinus clay through consolidated and drained triaxial testing in saturated conditions, Rock Mech. Rock Eng., 51, 1305, 10.1007/s00603-017-1398-5 Hatzor, 1997, Dilation of anisotropic rock salt: evidence from mount sedom diapir, J. Geophys. Res. Solid Earth, 102, 14853, 10.1029/97JB00958 Ismael, Mohamed. 2018. “Inherent Strength and Stiffness Anisotropy of Laminated Rocks. PhD Thesis (In Press).” TU Bergakademie Freiberg, Germany. Ismael, Mohamed, and Heinz Konietzky. 2017. “Integration of Elastic Stiffness Anisotropy into Ubiquitous Joint Model.” In Symposium of the International Society for Rock Mechanics- Human Activity in Rock Masses - Eurock 2017 (in Press), 191:1032–39. Ostrava, Czech Republic. doi:10.1016/j.proeng.2017.05.276. Itasca Consulting Group Inc, 2016 Jaeggi, D., Andrea Lisjak, J. Gisiger, and J. Becker. 2012. “FE-C Experiment: Engineering Part of Full-Scale Emplacement Experiment Geological and Structural Mapping of the FE-Tunnel Including a Photogrammetric Method. Unpublished Technical Note TN2012-82”. Konietzky, Heinz, P. Blümling, and L. te Kamp. 2003. “Opalinuston, Felsmechanische Untersuchungen, Nagra Interne Berichte (NIB) 03-08”. Konietzky, 2004 Lanyon, G W, D Martin, S Giger, and P Marschall. 2014. “Development and Evolution of the Excavation Damaged Zone (EDZ) in the Opalinus Clay – A Synopsis of the State of Knowledge from Mont Terri, Arbeitsbericht NAB 14-87.” <www.nagra.ch>. Le, 2015, Hydromechanical response of a bedded argillaceous rock formation to excavation and water injection, Can. Geotech. J., 52, 1, 10.1139/cgj-2013-0324 Lekhnitskii, 1981 Lisjak, 2015, The excavation of a circular tunnel in a bedded argillaceous rock (opalinus clay): short-term rock mass response and fdem numerical analysis, Tunn. Undergr. Space Technol., 45, 227, 10.1016/j.tust.2014.09.014 Lisjak, 2014, Continuum–discontinuum analysis of failure mechanisms around unsupported circular excavations in anisotropic clay shales, Int. J. Rock Mech. Min. Sci. 65 (Suppl. C), 96, 10.1016/j.ijrmms.2013.10.006 Lisjak, 2016, Hybrid finite-discrete element simulation of the edz formation and mechanical sealing process around a microtunnel in opalinus clay, Rock Mech. Rock Eng., 49, 1849, 10.1007/s00603-015-0847-2 Loon, 2008, Preferred orientations and anisotropy in shales: callovo-oxfordian shale (France) and opalinus clay (Switzerland), Clays Clay Miner., 56, 285, 10.1346/CCMN.2008.0560301 Marschall, P, M Distinguin, H Shao, and P Bossart. 2006. “Creation and Evolution of Damage Zones Around a Microtunnel in a Claystone Formation of the Swiss Jura Mountains.” In SPE International Symposium and Exhibition on Formation Damage Control, SPE-98537-MS. Lafayette, Louisiana: SPE. doi:10.2118/98537-MS. Müller, 2017, Implementation of the full-scale emplacement (FE) experiment at the Mont Terri rock laboratory, Swiss J. Geosci., 110, 287, 10.1007/s00015-016-0251-2 Naumann, 2007, Experimental investigations on anisotropy in dilatancy, failure and creep of Opalinus Clay, Phys. Chem. Earth, Parts A/B/C, 32, 889, 10.1016/j.pce.2005.04.006 Neuner, 2017, Time-dependent material properties of shotcrete: experimental and numerical study, Materials, 10, 1067, 10.3390/ma10091067 Nguyen, 2015, Development of a constitutive model for a bedded argillaceous rock from triaxial and true triaxial tests, Can. Geotech. J., 52, 1072, 10.1139/cgj-2013-0323 Olalla, 1999, TN98-57, Popp, T., and K. Salzer. 2007. “HE-D Experiment: Influence of Bedding Planes (IfG) - Final Report, Technical Report 2007-04”. Rummel, F., and U. Weber. 2007. “Rock Mechanics Analyses (RA) Experiment: Results of Uniaxial and Triaxial Tests on Opalinus Clay Samples, Unpublished Mont Terri Technical Note 2005-57, Mont Terri Project, Switzerland.” <https://www.nagra.ch/data/documents/database/dokumente/$default/Default Folder/Publikationen/NTBs 1994-2000/d_ntb00-01 textband.pdf>. Salager, 2010, Anisotropic Features of the Mechanical Behaviour of Opalinus Clay Salager, 2013, Constitutive analysis of the mechanical anisotropy of opalinus clay, Acta Geotech., 8, 137, 10.1007/s11440-012-0187-2 Thöny, 2014, geomechanical analysis of excavation-induced rock mass behavior of faulted opalinus clay at the mont terri underground rock laboratory (Switzerland), ETH-Zürich Vermeer, 1984, 3 Vogt, Tobias, H Sakaki, and T Vietor. 2013. “Monitoring THM Effects in a Full Scale EBS/Host Rock System—First Experiences of the FE-Experiment in the Mont Terri URL during Construction and Ventilation Phase.” In MoDeRn International Conference and Workshop, March 2013, Luxembourg, 326–334. Luxembourg. Walton, 2015, A Laboratory-Testing-Based Study on the Strength, Deformability, and Dilatancy of Carbonate Rocks at Low Confinement, Rock Mech. Rock Eng., 48, 941, 10.1007/s00603-014-0631-8 Wermeille, S., and Paul Bossart. 1999. “Insitu Stresses in the Mont Terri Region: Data Compilation, Technical Report 99-02”. Wild, K M, F Amann, C D Martin, J Wassermann, C David, and M Barla. 2015. “Dilatancy of Clay Shales and Its Impact on Pore Pressure Evolution and Effective Stress for Different Triaxial Stress Paths.” 49th U.S. Rock Mechanics/Geomechanics Symposium. San Francisco, California: American Rock Mechanics Association. Zhao, 2010, A mobilized dilation angle model for rocks, Int. J. Rock Mech. Min. Sci., 47, 368, 10.1016/j.ijrmms.2009.12.007 Zhao, 2010, Considerations of rock dilation on modeling failure and deformation of hard rocks—a case study of the mine-by test tunnel in Canada, J. Rock Mech. Geotech. Eng., 2, 338