A multi-scale and multi-physics simulation methodology with the state-of-the-art tools for safety analysis in Light Water Reactors applied to a Turbine Trip scenario (Part II)

Adams, 2016 Adamsson, 2011, Modeling and validation of a mechanistic tool (MEFISTO) for the prediction of critical power in BWR fuel assemblies, Nuclear Eng. Des., 241, 2843, 10.1016/j.nucengdes.2011.01.033 Ánchel, 2012, Uncertainty and sensitivity analysis in the neutronic parameters generation for BWR and PWR coupled thermal-hydraulic–neutronic simulations, Nuclear Engineering and Design, 246, 98, 10.1016/j.nucengdes.2011.11.016 Avramova, 2008, 16802 Geelhood, K. J., Luscher, W. G., 2015. FRAPCON-4.0: Integral Assessment. PNNL-19418, Vol. 2, Rev. 2 September 2015 (USA). Geelhood, K.J., et al., 2016. “FRAPTRAN-2.0: A Computer Code for the Transient Analysis of Oxide Fuel Rods” PNNL-19400, Vol. 1, Rev. 2 May 2016 (USA). Hernández-Solís, 2011, Uncertainty and sensitivity analyses as a validation tool for BWR bundle thermal–hydraulic predictions, Nuclear Engineering and Design, 241, 3697, 10.1016/j.nucengdes.2011.06.034 Hidalga, P., et al., 2019. A Multi-scale and Multi-Physics Simulation Methodology with the state-of-the-art tools for safety analysis in Light Water Reactors applied to a Turbine Trip Scenario (PART I). To be published. Ikonen, 2014, The importance of input interactions in the uncertainty and sensitivity analysis of nuclear fuel behavior, Nuclear Engineering and Design, 275, 229, 10.1016/j.nucengdes.2014.05.015 Perin, 2017, Application of the best-estimate plus uncertainty approach on a BWR ATWS transient using the NURESIM European code platform, Nuclear Engineering and Design, 321, 10.1016/j.nucengdes.2017.05.018 USNRC, 2007, NUREG-0800, Chapter 15.2.1-15.2.5 Standard Review Plan for the Loss of external load; Turbine trip; loss of condenser vacuum; closure of main steam isolation valve (BWR); and steam pressure regulator failure (PWR) USA. https://www.nrc.gov/docs/ML0703/ML070300702.pdf. USNRC, 2007. NUREG-0800, Chapter 15 Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants: LWR Edition - Transient and Accident Analysis. 2007. https://www.nrc.gov/docs/ML0707/ML070710376.pdf. USNRC, 2003. “Regulatory, Guide 1.53: Application of the single-failure criterion to safety systems” USA. https://www.nrc.gov/docs/ML0332/ML033220006.pdf. Wilks, 1941, Determination of sample sizes for setting tolerance limits, Ann. Math. Statist., 12, 91, 10.1214/aoms/1177731788