A micromechanical characterization of residual thermal stresses in carbon fiber/epoxy composites containing a non-uniform interphase region

Aboudi, 1991 Atkins, 1975, Intermittent bonding for high toughness/high strength composites, J. Mater. Sci., 10, 819, 10.1007/BF01163077 Bell, 1994, Interlayer/interphase effects in graphite-epoxy composites, 74 Bender, 1986, Effect of fiber coatings and composite processing on properties of zirconia-based matrix SiC fiber composites, Am. Ceram. Soc. Bull., 65, 363 Benveniste, 1989, Stress fields in composites with coated inclusions, Mech. Mater., 7, 305, 10.1016/0167-6636(89)90021-5 Broutman, 1974, A theoretical study of the effect of an interfacial layer on the properties of composites, Polym. Engng Sci., 14, 581, 10.1002/pen.760140808 Carman, 1993, Optimization of fiber coatings to minimize stress concentrations in composite materials, J. Compos. Mater., 27, 589, 10.1177/002199839302700603 Chang, 1987, Effects of a controlled modulus interlayer upon the properties of graphite/epoxy composite, SAMPE Q., 18, 39 Christensen, 1979, Solutions for effective shear properties in three phase sphere and cylinder models, J. Mech. Phys. Solids, 27, 315, 10.1016/0022-5096(79)90032-2 Drzal, 1986, The interphase in epoxy composites, Vol. 75, 1 Gardner, 1993, Polymeric composite materials incorporating an elastomeric interphase: a mathematical assessment, Compos. Sci. Technol., 46, 307, 10.1016/0266-3538(93)90176-H Gardner, 1993, Residual thermal stresses in filamentary polymer-matrix composites containing an elastomeric interphase, J. Compos. Mater., 27, 830, 10.1177/002199839302700805 Gardner, 1995, Microstress distribution in graphite fiber/epoxy composites containing an elastomeric interphase: response to uniaxial and biaxial loading conditions, Composites, 10.1016/0010-4361(95)93670-F Gérard, 1990, Introduction of a rubbery interphase in glass/epoxy composite materials: influence of the interlayer thickness on the viscoelastic and mechanical properties of particulate and unidirectional composites, 441 Hahn, 1991, Thermal expansion of TiAl + TiB2 alloys and model calculations of stresses and expansion of continuous fiber composites, Int. J. Thermophys., 12, 711, 10.1007/BF00534226 Hancox, 1977, The effects of fibre surface coatings on the mechanical properties of CFRP, Fibre Sci. Téchnol., 10, 9, 10.1016/0015-0568(77)90025-2 He, 1994, Continuous fiber composites with elastomeric interphases covalently bonded to both fiber surfaces and epoxy matrices Hughes, 1991, The carbon fibre/epoxy interface—a review, Compos. Sci. Technol., 41, 13, 10.1016/0266-3538(91)90050-Y 1988 1990 Jansson, 1992, Reduction of thermal stresses in continuous fiber reinforced metal matrix composites with interface layers, J. Compos. Mater., 26, 1474, 10.1177/002199839202601005 Jasiuk, 1993, The effect of an inhomogeneous interphase on the elastic constants of transversely isotropic composites, Mech. Mater., 15, 53, 10.1016/0167-6636(93)90078-6 Jayaraman, 1992, Residual stresses in a composite with continuously varying Young's modulus in the fiber/matrix interphase, J. Compos. Mater., 26, 770, 10.1177/002199839202600601 Jayaraman, 1993, The interphase in unidirectional fiber-reinforced epoxies: effect on residual thermal stresses, Compos. Sci. Technol., 47, 119, 10.1016/0266-3538(93)90041-E Jayaraman, 1994, The interphase in unidirectional fiber-reinforced epoxies: effect on local stress fields, J. Compos. Technol. Res., 16, 21, 10.1520/CTR10391J Kim, 1991, Effects of interfacial coating and temperature on the fracture behaviors of unidirectional Kevlar and carbon fibre reinforced epoxy resin composites, J. Mater. Sci., 26, 4702, 10.1007/BF00612409 Lo, 1990, Determination of flexible interlayer thickness for fiber reinforced composites, 170, 55 Low, 1994, A micromechanical characterization of graphite fiber/epoxy composites containing a heterogeneous interphase region, Compos. Sci. Technol., 52, 589, 10.1016/0266-3538(94)90042-6 Lowden, 1988, Interface modification in Nicalon/SiC composites, 9, 705 Maurer, 1990, An interlayer model to describe the physical properties of particulate composites, 491 Mikata, 1985, Stress field in a coated continuous fiber composite subjected to thermomechanical loadings, J. Compos. Mater., 19, 554, 10.1177/002199838501900607 Naik, 1992, Simplified micromechanical equations for thermal residual stress analysis of coated fiber composites, J. Compos. Technol. Res., 14, 182, 10.1520/CTR10096J Nairn, 1985, Thermoelastic analysis of residual stresses in unidirectional, high-performance composites, Polym. Compos., 6, 123, 10.1002/pc.750060211 Nairn, 1985, Matrix solidification and the resulting residual thermal stresses in composites, J. Mater. Sci., 20, 355, 10.1007/BF00555929 Pagano, 1988, Elastic response of multi-directional coated-fiber composites, Compos. Sci. Technol., 31, 273, 10.1016/0266-3538(88)90034-6 Pagano, 1990, Thermo-elastic model for multidirectional coated-fiber composites: traction formulation, Compos. Sci. Technol., 38, 247, 10.1016/0266-3538(90)90061-9 Papanicolaou, 1980, Adhesion efficiency between phases in fibrereinforced polymer by means of the concept of boundary interphase, Colloid Polym. Sci., 258, 1231, 10.1007/BF01668768 Peiffer, 1979, Preparation and mechanical properties of thick interlayer composites, J. Appl. Polym. Sci., 23, 2253, 10.1002/app.1979.070230804 1991, 42, 1 Pittman, 1994, Preparation of model composites containing elastomeric polymeric interphases chemically bonded to both fiber and matrix, 2 Pittman, 1994, Preparation of model composites containing elastomeric polymeric interphases chemically bonded to both fiber and matrix Qui, 1991, Elastic moduli of thickly coated particle and fiber-reinforced composites, J. Appl. Mech., 58, 388, 10.1115/1.2897198 Robertson, 1992, Fiber-matrix interphase effects upon transverse behavior in metal-matrix composites, J. Compos. Technol. Res. JCTRER, 14, 3, 10.1520/CTR10077J Robertson, 1993, Micromechanical relations for fiber-reinforced composites using the free transverse shear approach, J. Compos. Technol. Res., JCTRER, 15, 181, 10.1520/CTR10368J Sideridis, 1988, The in-plane shear modulus of fibre reinforced composites as defined by the concept of interphase, Compos. Sci. Technol., 31, 35, 10.1016/0266-3538(88)90076-0 Singh, 1987, Effect of boron nitride coating on fiber-matrix interactions, 8, 636 Sottos, 1989, Thermal stresses due to property gradients at the fiber/matrix interface, 11 Sottos, 1992, The influence of interphase regions on local thermal displacements in composites, Compos. Sci. Technol., 44, 319, 10.1016/0266-3538(92)90069-F Sullivan, 1990, Determination of mechanical properties of interfacial region between fiber and matrix in organic matrix composites, 521 Swain, 1990, Interface/interphase concepts in composite material systems, J. Thermoplastic Compos. Mater., 3, 13, 10.1177/089270579000300102 Theocaris, 1993, The influence of the elastic properties and dimensions of coatings on the stiffness of encapsulated fiber composites, Compos. Sci. Technol., 45, 293, 10.1016/0266-3538(92)90044-4 Theocaris, 1985, The elastic longitudinal modulus and Poisson's ratio of fiber composites, J. Reinforced Plastics Compos., 4, 396, 10.1177/073168448500400405 Tong, 1990, Thermal stresses and thermal expansion coefficients of composites reinforced with coated spherical particles, 539 Williams, 1978, Thermoplastic fibre coatings enhance composite strength and toughness, Fibre Sci. Technol., 11, 83, 10.1016/0015-0568(78)90001-5 Williams, 1990, Properties of the interphase in organic matrix composites, Mater. Sci. Engng, A126, 305, 10.1016/0921-5093(90)90137-R Williams, 1994, Formation of the interphase in organic-matrix composites, Composites, 25, 757, 10.1016/0010-4361(94)90212-7 Zhang, 1990, An analytical model for the elastic properties of fibrous composites with anisotropic constituents, Compos Sci. Technol., 38, 229, 10.1016/0266-3538(90)90060-I