A methodology for precision additive manufacturing through compensation

Murr, 2012, Metal fabrication by additive manufacturing using laser and electron beam melting technologies, J Mater Sci Technol, 28, 1, 10.1016/S1005-0302(12)60016-4 Bagg, 2016 Colegrove, 2016, Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components, Scr Mater Buchbinder, 2014, Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting, J Laser Appl, 26, 012004, 10.2351/1.4828755 Morgan, 2016, Part orientation optimisation for the additive layer manufacture of metal components, Int J Adv Manuf Technol, 86, 1679, 10.1007/s00170-015-8151-6 Pursell, 2016, On the creation of a new finite element simulation environment for additive manufacturing Keller, 2016, New method for fast predictions of residual stress and distortion of AM parts Patil, 2015, A generalized feed forward dynamic adaptive mesh refinement and derefinement finite element framework for metal laser sintering – Part I: Formulation and algorithm development, J Manuf Sci Eng: Trans ASME, 137 Afazov, 2017, Methodology and validation of rapid prediction of distortion for powder-bed additive layer manufacture Additive Manufacturing UK, 2016 Afazov, 2012, Development of a Finite Element Data Exchange System for chain simulation of manufacturing processes, Adv Eng Softw, 47, 104, 10.1016/j.advengsoft.2011.12.011 Scrimieri, 2015, An in-core grid index for transferring finite element data across dissimilar meshes, Adv Eng Softw, 88, 53, 10.1016/j.advengsoft.2015.06.001 Renishaw Data Sheet, 2015 Villarraga, 2014, Dimensional metrology of internal features with X-ray computed tomography, Proceeding of the ASPE 2014 annual meeting, 684 Kempen, 2014, Dimensional accuracy of internal channels in SLM produced parts, Proc ASPE 2014 Spring Top Meet, 57, 76 Everton, 2016, Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing, Mater Des, 95, 431, 10.1016/j.matdes.2016.01.099 Fay, 2014, Characterizing additive manufacturing parts using coherence scanning interferometry, Proc ASPE 2014 Spring Top Meet, 57, 135 Grimm, 2014, Characterisation of additive manufactured surfaces with confocal microscopy, Proc ASPE 2014 Spring Top Meet, 57, 139 Toschi, 2015, Evaluating dense 3D surface reconstruction techniques using a metrological approach, NCSLI Meas: J Meas Sci, 10, 38, 10.1080/19315775.2015.11721715 MacKinnon, 2015, Single-plane versus three-plane methods for relative range error evaluation of medium-range 3D imaging systems