A loop-breaking method for the analysis and simulation of feedback amplifiers
IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications - Tập 49 Số 8 - Trang 1045-1061 - 2002
Tóm tắt
Two-circuit models for feedback subcircuits are developed from a modification to the two-port method of feedback amplifier analysis and are applied in a method to break the feedback loop. These models are terminally equivalent to linear and nonlinear subcircuits, have physically-disconnected topologies, and employ dependent sources to control lateral signal transfer with a switch-like on or off manner. With feedback subcircuits replaced by these models in a SPICE simulation, it is possible to keep the amplifier biased at its closed-loop dc operating point while it operates in an open-loop or a closed-loop ac configuration. Small-signal analysis of the amplifier's equivalent circuit yields exact expressions for open-loop and closed-loop response functions, and the loop-gain.
Từ khóa
#Analytical models #Feedback amplifiers #Feedback loop #Operational amplifiers #SPICE #Integrated circuit interconnections #Circuit simulation #Voltage #Circuit topology #Equivalent circuitsTài liệu tham khảo
10.1109/82.476178
10.1109/101.621602
1983, Linear and interface integrated circuits
antognetti, 1993, Semiconductor Device Modeling With SPICE
1983, Small-signal transistor data
vladimirescu, 1981, SPICE Version 2G User s Guide
1997, Mathcad 7 User s Guide
10.1142/0859
gray, 1969, Electronic Principles Physics Models and Circuits
10.1109/31.99170
chan, 1972, Analysis of Linear Networks and Systems
carson, 1982, High-Frequency Amplifiers
van valkenburg, 1974, Network Analysis
ghausi, 1965, Principles and Design of Linear Active Circuits
gray, 1993, Analysis and Design of Analog Integrated Circuits
d azzo, 1960, Feedback Control System Analysis and Synthesis