A hydrodynamic model for biomass gasification in a circulating fluidized bed riser

Worley, 2012 Juhui, 2017, Modelling of coal/biomass co-gasification in internal circulating fluidized bed using kinetic theory of granular mixture, Energy Convers. Manage., 148, 506, 10.1016/j.enconman.2017.05.080 Bashir, 2017, Modelling and performance analysis of biomass fast pyrolysis in a solar-thermal reactor, ACS Sustain. Chem. Eng., 5, 3795, 10.1021/acssuschemeng.6b02806 Lia, 2004, Biomass gasification in a circulating fluidized bed, Biomass Bioenergy, 26, 171, 10.1016/S0961-9534(03)00084-9 Parthasarathy, 2014, Hydrogen production from steam gasification of biomass: influence of process parameters on hydrogen yield- a review, Renew. Energy, 66, 570, 10.1016/j.renene.2013.12.025 Wei, 2007, Steam gasification of biomass for hydrogen-rich gas in a free-fall reactor, Int. J. Hydrogen Energy, 32, 24, 10.1016/j.ijhydene.2006.06.002 Ku, 2015, CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor, Chem. Eng. Sci., 122, 270, 10.1016/j.ces.2014.08.045 Gel, 2016, Nonintrusive uncertainty quantification of computational fluid dynamics simulations of a bench-scale fluidized-bed gasifier, Ind. Eng. Chem. Res., 55, 12477, 10.1021/acs.iecr.6b02506 Anil, 2016, Performance evaluation of fluidised bed biomass gasifier using CFD, Energy Procedia, 90, 154, 10.1016/j.egypro.2016.11.180 Yan, 2016, Simulation of biomass-steam gasification in fluidized bed reactors: model setup, comparisons and preliminary predictions, Bioresour. Technol., 221, 625, 10.1016/j.biortech.2016.09.089 Kraft, 2017, CPFD simulations of an industrial-sized dual fluidized bed steam gasification system of biomass with 8 MW fuel input, Appl. Energy, 190, 408, 10.1016/j.apenergy.2016.12.113 Liu, 2016, CFD studies on biomass gasification in a pilot-scale dual fluidized-bed system, Int. J. Hydrogen Energy, 41, 11974, 10.1016/j.ijhydene.2016.04.205 Liu, 2017, Operating parameter effects on the solids circulation rate in the CFD simulation of a dual fluidized-bed gasification system, Chem. Eng. Sci., 169, 235, 10.1016/j.ces.2016.11.040 Parker, 2002, Positron emission particle tracking using the new Birmingham positron camera, Nucl. Instrum. Methods, A477, 540, 10.1016/S0168-9002(01)01919-2 Parker, 1993, Positron emission particle tracking- a technique for studying flow within engineering equipment, Nucl. Instrum. Methods Phys. Res. Sect. A, 326, 592, 10.1016/0168-9002(93)90864-E Seville, 2010, Single particle view of fluidization Seville, 2009, Positron emission imaging in chemical engineering, 37 Gidaspow, 1991, Hydrodynamics of circulating fluidized beds, kinetic theory approach, 75 Lun, 1984, Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flow field, J. Fluid Mech., 140, 223, 10.1017/S0022112084000586 Ding, 1990, A bubbling fluidization model using kinetic theory of granular flow, AIChE J., 36, 523, 10.1002/aic.690360404 2016 Mazzei, 2008 Enwald, 1996, Eulerian two-phase flow theory applied to fluidization, Int. J. Multiphase Flow, 22, 21, 10.1016/S0301-9322(96)90004-X Hulme, 2005, CFD modeling and validation of bubble properties for a bubbling fluidized bed, Ind. Eng. Chem. Res., 44, 4254, 10.1021/ie049837j Schneiderbauer, 2014, A coarse-grained two-fluid model for gas-solid fluidized beds, J. Comput. Multiph. Flows, 6, 29, 10.1260/1757-482X.6.1.29 Lohaa, 2012, Assessment of drag models in simulating bubbling fluidized bed hydrodynamics, Chem. Eng. Sci., 75, 400, 10.1016/j.ces.2012.03.044 Almuttahar, 2008, Computational fluid dynamics of high density circulating fluidized bed riser: study of modeling parameters, Powder Technol., 185, 11, 10.1016/j.powtec.2007.09.010 Makkawi, 2003, The voidage function and effective drag force for fluidized beds, Chem. Eng. Sci. Chem. Eng. Sci., 58, 2035, 10.1016/S0009-2509(03)00054-X Makkawi, 2005, Modelling of particle stress at the dilute-intermediate-dense flow regimes: a review, KONA Powder Sci. Technol., 23, 49, 10.14356/kona.2005009 Gidaspow, 1994 Ergun, 1952, Fluid flow through packed columns, Chem. Eng. Prog., 48, 89 Wen, 1966, Mechanics of fluidization, Chem. Eng. Prog. Symp. Ser., 62, 100 Syamlal, 1993 Owoyemi, 2007, CFD modeling of binary-fluidized suspensions and investigation of role of particle–particle drag on mixing and segregation, AlChE J., 53, 1924, 10.1002/aic.11227 Syamlal, 1987 Chapman, 1970 Halvorsen, 2005 Wang, 2009, Prediction of radial distribution function of particles in a gas-solid fluidized bed using discrete hard-sphere model, Ind. Eng. Chem. Res., 48, 1343, 10.1021/ie8007049 Savage, 1988, Streaming motions in a bed of vibrationlly fluidized dry granular material, J. Fluid Mech., 194, 457, 10.1017/S0022112088003064 Van Wachem, 2001, Comparative analysis of CFD models of dense gas–solid systems, AlChE J., 47, 1035, 10.1002/aic.690470510 Bagnold, 1954, Experiments on a gravity free dispersion of large solid spheres in a Newtonian fluid under shear, Proc. R. Soc. Lond., A225, 49 Fedors, 1979, An empirical method of estimating the void fraction in mixtures of uniform particles of different size, Powder Technol., 23, 225, 10.1016/0032-5910(79)87011-4 Iddir, 2005, Modeling of multi-type particle flow using the kinetic theory approach, AlChE J., 51, 1620, 10.1002/aic.10429 Lebowitz, 1964, Exact solution of generalized percus-yevick equation for a mixture of Hard spheres, Phys. Rev. A, 133, 895, 10.1103/PhysRev.133.A895 Cornelissen, 2007, CFD modelling of a liquid-solid fluidized bed, Chem. Eng. Sci., 62, 6334, 10.1016/j.ces.2007.07.014 Gobin, 2003, Fluid dynamic numerical simulation of a gas phase polymerization reactor, Int. J. Numer. Methods Fluids, 43, 1199, 10.1002/fld.542 Coroneo, 2011, CFD prediction of segregating fluidized bidisperse mixtures of particles differing in size and density in gas-solid fluidized beds, Chem. Eng. Sci., 66, 2317, 10.1016/j.ces.2011.02.019 Johnson, 1987, Frictional–collisional constitutive relations for granular materials, with application to plane shearing, J. Fluid Mech., 176, 67, 10.1017/S0022112087000570 Gidaspow, 2004, Hydrodynamics of fluidization using kinetic theory: an emerging paradigm 2002 flour-daniel lecture, Powder Technol., 148, 123, 10.1016/j.powtec.2004.09.025 Tartan, 2004, Measurement of granular temperature and stresses in risers, AIChE, 1760 Hartge, 2009, CFD-simulation of a circulating fluidized bed riser, Particuology, 7, 283, 10.1016/j.partic.2009.04.005 Wang, 2013, Numerical study of gas-solid flow in a coal beneficiation fluidized bed using kinetic theory of granular flow, Fuel Process. Technol., 111, 29, 10.1016/j.fuproc.2013.01.009 Yin, 2008, Drag law for bidisperse gas−solid suspensions containing equally sized spheres, Ind. Eng. Chem. Res., 48, 227, 10.1021/ie800171p Yin, 2009, Fluid-particle drag in low-reynolds-number polydisperse gas-solid suspensions, AlChE J., 55, 1352, 10.1002/aic.11800 Holloway, 2010, Fluid-particle drag in inertial polydisperse gas–solid suspensions, AlChE J., 56, 1194 Campbell, 1990, A particle pressure transducer suitable for use in gas-fluidized beds, Meas. Sci. Technol, 1, 1275, 10.1088/0957-0233/1/12/002 Chan, 2010, The solids flow in the riser of a CFB viewed by positron emission particle tracking (PEPT)