A hybrid energy harvesting system for self-powered applications in shared bicycles

Miller, 2016, Public transportation and sustainability: A review, KSCE J Civ Eng, 20, 1076, 10.1007/s12205-016-0705-0 Gholikhani, 2021, Dual electromagnetic energy harvesting technology for sustainable transportation systems, Energy Convers Manag, 230, 10.1016/j.enconman.2020.113804 Woodcock, 2013, Health Impact Modelling of Active Travel Visions for England and Wales Using an Integrated Transport and Health Impact Modelling Tool (ITHIM), PLoS ONE, 8, 10.1371/journal.pone.0051462 Zargari, 2021, A new Mylar-based triboelectric energy harvester with an innovative design for mechanical energy harvesting applications, Energy Convers Manag, 244, 10.1016/j.enconman.2021.114489 Shaikh, 2016, Energy harvesting in wireless sensor networks: A comprehensive review, Renew Sustain Energy Rev, 55, 1041, 10.1016/j.rser.2015.11.010 Abu-Rayash, 2021, Development and analysis of an integrated solar energy system for smart cities, Sustain Energy Technol Assessments, 46 Wardhana, 2020, Harvesting contact-separation-compression vibrations using a flexible and compressible triboelectric generator, Sustain Energy Technol Assessments, 42 Kim, 2018, Optimized composite piezoelectric energy harvesting floor tile for smart home energy management, Energy Convers Manag, 171, 31, 10.1016/j.enconman.2018.05.031 Siddique, 2015, A comprehensive review on vibration based micro power generators using electromagnetic and piezoelectric transducer mechanisms, Energy Convers Manag, 106, 728, 10.1016/j.enconman.2015.09.071 Chand, 2020, Design simulation of a novel fluid based footstep energy harvesting system, Sustain Energy Technol Assessments, 39 Wei, 2017, A comprehensive review on vibration energy harvesting: Modelling and realization, Renew Sustain Energy Rev, 74, 1, 10.1016/j.rser.2017.01.073 Debnath, 2020, Meandering-trapezoidal shaped MEMS structure for low frequency vibration based energy harvesting applications, Sustain Energy Technol Assessments, 42 Pan, 2021, Kinetic energy harvesting technologies for applications in land transportation: A comprehensive review, Appl Energy, 286, 10.1016/j.apenergy.2021.116518 Wu, 2021, A novel kinetic energy harvester using vibration rectification mechanism for self-powered applications in railway, Energy Convers Manag, 228, 10.1016/j.enconman.2020.113720 Zhang, 2016, A high-efficiency energy regenerative shock absorber using supercapacitors for renewable energy applications in range extended electric vehicle, Appl Energy, 178, 177, 10.1016/j.apenergy.2016.06.054 Long, 2020, Regenerative active suspension system with residual energy for in-wheel motor driven electric vehicle, Appl Energy, 260, 10.1016/j.apenergy.2019.114180 Qi, 2020, An electro-mechanical braking energy recovery system based on coil springs for energy saving applications in electric vehicles, Energy, 200, 10.1016/j.energy.2020.117472 Xie, 2020, A novel oscillating buoy wave energy harvester based on a spatial double X-shaped mechanism for self-powered sensors in sea-crossing bridges, Energy Convers Manag, 204, 10.1016/j.enconman.2019.112286 Yang, 2019, Design of energy harvester using rotating motion rectifier and its application on bicycle, Energy, 179, 222, 10.1016/j.energy.2019.05.036 Zhang, 2020, Rotational electromagnetic energy harvester for human motion application at low frequency, Appl Phys Lett, 116, 53902, 10.1063/1.5142575 Zhong, 2015, Rotating-disk-based hybridized electromagnetic-triboelectric nanogenerator for scavenging biomechanical energy as a mobile power source, Nano Energy, 13, 771, 10.1016/j.nanoen.2015.03.012 Maharjan, 2019, High-performance cycloid inspired wearable electromagnetic energy harvester for scavenging human motion energy, Appl Energy, 256, 10.1016/j.apenergy.2019.113987 Maamer, 2019, A review on design improvements and techniques for mechanical energy harvesting using piezoelectric and electromagnetic schemes, Energy Convers Manag, 199, 10.1016/j.enconman.2019.111973 Kim, 2011, A review of piezoelectric energy harvesting based on vibration, Int J Precis Eng Manuf, 12, 1129, 10.1007/s12541-011-0151-3 Surducan, 2020, Harvesting and conversion of the environmental electromagnetic pollution into electrical energy by novel rectenna array coupled with resonant micro-converter, ENERGY, 211, 10.1016/j.energy.2020.118645 Rezaei, 2019, Efficient energy harvesting from nonlinear vibrations of PZT beam under simultaneous resonances, ENERGY, 182, 369, 10.1016/j.energy.2019.05.212 Esmaeeli, 2019, Design, modeling, and analysis of a high performance piezoelectric energy harvester for intelligent tires, Int J Energy Res, 43, 5199, 10.1002/er.4441 Jasim, 2017, Optimized design of layered bridge transducer for piezoelectric energy harvesting from roadway, ENERGY, 141, 1133, 10.1016/j.energy.2017.10.005 Bolat FC, Basaran S, Sivrioglu S. Piezoelectric and electromagnetic hybrid energy harvesting with low-frequency vibrations of an aerodynamic profile under the air effect. Mech Syst Signal Process 2019;133. 10.1016/j.ymssp.2019.106246. Tang, 2019, A high-efficiency multidirectional wind energy harvester based on impact effect for self-powered wireless sensors in the grid, Smart Mater Struct, 28, 10.1088/1361-665X/ab45fe Zhou, 2021, A distributed-parameter electromechanical coupling model for a segmented arc-shaped piezoelectric energy harvester, Mech Syst Signal Process, 146, 10.1016/j.ymssp.2020.107005 Toron, 2020, Nanogenerator for dynamic stimuli detection and mechanical energy harvesting based on compressed SbSeI nanowires, ENERGY, 212, 10.1016/j.energy.2020.118717 He, 2021, A dual piezoelectric energy harvester with contact and non-contact driven by inertial wheel, Mech Syst Signal Process, 146, 10.1016/j.ymssp.2020.106994 Ghavami, 2018, On the dynamics of a capacitive electret-based micro-cantilever for energy harvesting, ENERGY, 153, 967, 10.1016/j.energy.2018.04.034 Mei, 2021, Enhancing energy harvesting in low-frequency rotational motion by a quad-stable energy harvester with time-varying potential wells, Mech Syst Signal Process, 148, 10.1016/j.ymssp.2020.107167 Latif U, Uddin E, Younis MY, Aslam J, Ali Z, Sajid M, et al. Experimental electro-hydrodynamic investigation of flag-based energy harvesting in the wake of inverted C-shape cylinder. ENERGY 2021;215. 10.1016/j.energy.2020.119195. Rui, 2021, Design and analysis of a broadband three-beam impact piezoelectric energy harvester for low-frequency rotational motion, Mech Syst Signal Process, 149, 10.1016/j.ymssp.2020.107307 Shin, 2020, Automatic resonance tuning mechanism for ultra-wide bandwidth mechanical energy harvesting, Nano Energy, 77, 10.1016/j.nanoen.2020.104986 Chandrasekaran, 2019, Micro-scale to nano-scale generators for energy harvesting: Self powered piezoelectric, triboelectric and hybrid devices, Phys. REPORTS-REVIEW Sect. Phys. Lett., 792, 1 Haque, 2019, Triboelectric freestanding flapping film generator for energy harvesting from gas flow in pipes, SMART Mater. Struct., 28, 10.1088/1361-665X/ab0840 Leng, 2014, Flexible interdigital-electrodes-based triboelectric generators for harvesting sliding and rotating mechanical energy, J. Mater. Chem. A, 2, 19427, 10.1039/C4TA04137B Meng, 2014 Zhang, 2018, Rationally designed sea snake structure based triboelectric nanogenerators for effectively and efficiently harvesting ocean wave energy with minimized water screening effect, Nano Energy, 48, 421, 10.1016/j.nanoen.2018.03.062 Cui, 2015, Wearable Triboelectric Generator for Powering the Portable Electronic Devices, ACS Appl. Mater. Interfaces, 7, 18225, 10.1021/am5071688 Cheng, 2015, Wearable electrode-free triboelectric generator for harvesting biomechanical energy, Nano Energy, 12, 19, 10.1016/j.nanoen.2014.12.009 Azam, 2021, Knowledge structure and research progress in wind power generation (WPG) from 2005 to 2020 using CiteSpace based scientometric analysis, J Clean Prod, 295, 10.1016/j.jclepro.2021.126496 Sayyah, 2014, Energy yield loss caused by dust deposition on photovoltaic panels, Sol Energy, 107, 576, 10.1016/j.solener.2014.05.030