A geometric approach for kinematic identification of an industrial robot using a monocular camera

Roth, 1987, An overview of robot calibration, IEEE J. Robot. Autom., 3, 377, 10.1109/JRA.1987.1087124 Benjamin, 1991 Bugalia, 2015, Immersive environment for robotic tele-operation, 1 Mukherjee, 2013, Exoskeleton for tele-operation of industrial robot, 1 Driels, 1993, Full-pose calibration of a robot manipulator using a coordinate-measuring machine, Int. J. Adv. Manuf. Technol., 8, 34, 10.1007/BF01756635 Nubiola, 2014, Comparison of two calibration methods for a small industrial robot based on an optical CMM and a laser tracker, Robotica, 32, 447, 10.1017/S0263574713000714 Newman, 2000, Calibration of a motoman p8 robot based on laser tracking, 3597 Tang, 1993, Robot calibration using single laser displacement meter, Mechatronics, 3, 503, 10.1016/0957-4158(93)90020-3 Lau, 1985, Robot performance measurements using automatic laser tracking techniques, Robot. Comput. Integr. Manuf., 2, 227, 10.1016/0736-5845(85)90110-3 Vincze, 1994, A laser tracking system to measure position and orientation of robot end-effectors under motion, Int. J. Rob. Res., 13, 305, 10.1177/027836499401300402 Nubiola, 2013, A new method for measuring a large set of poses with a single telescoping ballbar, Precis. Eng., 37, 451, 10.1016/j.precisioneng.2012.12.001 Driels, 1993, Using passive end-point motion constraints to calibrate robot manipulators, J. Dyn. Syst. Measure. Control, 115, 560, 10.1115/1.2899139 Bennet, 1990, Closed loop kinematic calibration of the Utah-MIT hand, 539 Slamani, 2007, A comparative evaluation of three industrial robots using three reference measuring techniques, Int. J. Ind. Robot, 42, 572, 10.1108/IR-05-2015-0088 Filion, 2018, Robot calibration using a portable photogrammetry system, Robot. Comput. Integr. Manuf., 49, 77, 10.1016/j.rcim.2017.05.004 Driels, 1994, Automated partial pose measurement system for manipulator calibration experiments, IEEE Trans. Robot. Autom., 10, 430, 10.1109/70.313094 Messay, 2016, Computationally efficient and robust kinematic calibration methodologies and their application to industrial robots, Robot. Comput. Integr. Manuf., 37, 33, 10.1016/j.rcim.2015.06.003 Alici, 2005, A systematic technique to estimate positioning errors for robot accuracy improvement using laser interferometry based sensing, Mech. Mach. Theory, 40, 879, 10.1016/j.mechmachtheory.2004.12.012 Alici, 2005, Enhanced stiffness modeling, identification and characterization for robot manipulators, IEEE Trans. Rob., 21, 554, 10.1109/TRO.2004.842347 Shirinzadeh, 2010, Laser interferometry-based guidance methodology for high precision positioning of mechanisms and robots, Robot. Comput. Integr. Manuf., 26, 74, 10.1016/j.rcim.2009.04.002 Alıcı, 2006, Prediction of geometric errors of robot manipulators with particle swarm optimisation method, Rob. Auton. Syst., 54, 956, 10.1016/j.robot.2006.06.002 ISO/TR, 1995 Nubiola, 2013, Absolute calibration of an ABB IRB 1600 robot using a laser tracker, Robot. Comput. Integr. Manuf., 29, 236, 10.1016/j.rcim.2012.06.004 Lertpiriyasuwat, 2006, Adaptive real-time estimation of end-effector position and orientation using precise measurements of end-effector position, IEEE Trans. Mechatron., 11, 304, 10.1109/TMECH.2006.876515 Tiwan, 2013, Cylindrical pellet pose estimation in clutter using a single robot mounted camera, 1 Roy, 2016, Pose estimation of cylindrical texture-less objects in bin picking using sensor fusion, 2279 Hartley, 2000 Bennett, 1991, Autonomous robot calibration for hand-eye coordination, Int. J. Robot. Res., 10, 550, 10.1177/027836499101000510 Rousseau, 2001, Machine vision system for the automatic identification of robot kinematic parameters, IEEE Trans. Robot. Autom., 17, 972, 10.1109/70.976033 Meng, 2001, Self-calibration of camera-equipped robot manipulators, Int. J. Rob. Res., 20, 909, 10.1177/02783640122068182 Motta, 2001, Robot calibration using a 3D vision-based measurement system with a single camera, Robot. Comput. Integr. Manuf., 17, 487, 10.1016/S0736-5845(01)00024-2 Du, 2013, Online robot calibration based on vision measurement, Robot. Comput. Integr. Manuf., 29, 484, 10.1016/j.rcim.2013.05.003 Borm, 1989, Experimental study of observability of parameter errors in robot calibration, 587 Driels, 1990, Significance of observation strategy on the design of robot calibration experiments, J. Field Rob., 7, 197 Ljung, 1999 Benjamin, 1991 Nahvi, 1996, The noise amplification index for optimal pose selection in robot calibration, vol. 1, 647 Sun, 2008, Observability index selection for robot calibration, 831 Joubair, 2016, Performances of observability indices for industrial robot calibration, 2477 Goswami, 1993, On a relationship between the physical features of robotic manipulators and the kinematic parameters produced by numerical calibration, ASME. J. Mech. Des., 115, 892, 10.1115/1.2919284 Khalil, 1986, A new geometric notation for open and closed-loop robots, vol. 3, 1174 He, 2010, Kinematic parameter identification for serial robot calibration based on POE formula, IEEE Trans. Rob., 26, 411, 10.1109/TRO.2010.2047529 Zhuang, 1996 Hayat, 2013, Identification of Denavit–Hartenberg parameters of an industrial robot, 1 Santolaria, 2013, Uncertainty estimation in robot kinematic calibration, Robot. Comput. Integr. Manuf., 29, 370, 10.1016/j.rcim.2012.09.007 Abderrahim, 2000, Kinematic model identification of industrial manipulators, Robot. Comput. Integr. Manuf., 16, 1, 10.1016/S0736-5845(99)00038-1 Santolaria, 2014, Articulated arm coordinate measuring machine calibration by laser tracker multilateration, Sci. World J., 2014, 10.1155/2014/681853 BASLER, (http://www.baslerweb.com/en/support/tools/lens-selector). Accessed:2018-12-21. Golub, 2012, vol. 3 Shakarji, 1998, Least-squares fitting algorithms of the NIST algorithm testing system, J. Res. Natl. Inst. Stand. Technol., 103, 633, 10.6028/jres.103.043 Pennestrì, 2007, Linear algebra and numerical algorithms using dual numbers, Multibody Syst. Dyn., 18, 323, 10.1007/s11044-007-9088-9 Chittawadigi, 2012, Robust measurement technique for the identification of DH parameters of serial robots, 1 KUKA Robotics, (http://www.kuka-robotics.com/en). Accessed:2018-12-21. Kuka Industrial Robots-kr 5 arc, (http://www.kuka-robotics.com/en/products/industrial_robots/low/kr5_arc/). Accessed:2018-10-28. Newman, 2000, Calibration of a motoman p8 robot based on laser tracking, vol. 4, 3597 Santolaria, 2013, Uncertainty estimation in robot kinematic calibration, Robot. Comput. Integr. Manuf., 29, 370, 10.1016/j.rcim.2012.09.007 Kinematic Parameter Extraction Steps, (https://drive.google.com/file/d/162vyVwUrv63G7jAOYbaUeXlgXnZH0Aqg/view?usp=sharing). Accessed:2018-12-21. Aruco: A Minimal Library for Augmented Reality Applications Based on Opencv, (ArUco: A minimal library for Augmented Reality applications based on OpenCV). Accessed:2018-12-21. Zhang, 2000, A flexible new technique for camera calibration, IEEE Trans. Pattern Anal. Mach. Intell., 22, 1330, 10.1109/34.888718 Mapping and Localization From Planar Markers, (http://www.uco.es/investiga/grupos/ava/node/57), Accessed:2018-12-21. M. Rafael, M. Manuel, Y. Enrique, and M. Rafael, Mapping and localization from planar markers. Pattern Recognition 73, 2018, 158-171. Camera calibration and 3D reconstruction, (http://docs.opencv.org/2.4/modules/calib3d/doc/camera_calibration_and_3d_reconstruction.html). Accessed:2018-12-21. Mapping and localization from planar markers | aplicaciones de la visin artificial, (http://www.uco.es/investiga/grupos/ava/node/57). Accessed:2018-12-21. Saha, 2014 Angeles, 2013, Fundamentals of Robotic Mechanical Systems: Theory, Methods, and Algorithms Denavit, 1955, A kinematic notation for lower-pair mechanisms based on matrices, Trans. ASME J. Appl. Mech., 22, 215 Chittawadigi, 2013 McCarthy, 1986, Dual orthogonal matrices in manipulator kinematics, Int. Robot. Res., 5, 45, 10.1177/027836498600500205