A dynamic model for current-based nozzle condition monitoring in fused deposition modelling

F42-Committee (2012) Terminology for additive manufacturing technologies. ASTM Int. https://doi.org/10.1520/F2792-12

Crump SS (1992) Apparatus and method for creating three-dimensional objects. US Patent 5,121,329

Schelly C, Anzalone G, Wijnen B, Pearce JM (2015) Open-source 3-D printing technologies for education: bringing additive manufacturing to the classroom. J Vis Lang Comput 28:226–237. https://doi.org/10.1016/j.jvlc.2015.01.004

Telegenov K, Tlegenov Y, Shintemirov A (2015) A low-cost open-source 3-d-printed three-finger gripper platform for research and educational purposes. IEEE Access 3:638–647. https://doi.org/10.1109/ACCESS.2015.2433937

Campbell I, Bourell D, Gibson I (2012) Additive manufacturing: rapid prototyping comes of age. Rapid Prototyp J 18(4):255–258. https://doi.org/10.1108/13552541211231563

Gibson I, Rosen D, Stucker B (2014) Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing. Springer, Berlin

Telegenov K, Tlegenov Y, Hussain S, Shintemirov A (2015) Preliminary design of a three-finger underactuated adaptive end effector with a breakaway clutch mechanism. J Robot Mechatronic 27(5):496–503. https://doi.org/10.20965/jrm.2015.p0496

Tlegenov Y, Telegenov K, Shintemirov A (2014) An open-source 3D printed underactuated robotic gripper. In: 2014 IEEE/ASME 10th international conference on mechatronic and embedded systems and applications (MESA), pp 1–6. IEEE. https://doi.org/10.1109/MESA.2014.6935605

Pearce JM (2012) Building research equipment with free, open-source hardware. Science 337(6100):1303–1304. https://doi.org/10.1126/science.1228183

Pearce JM (2014) Open-source lab: how to build your own hardware and reduce research costs. Elsevier, Amsterdam

Zein I, Hutmacher DW, Tan KC, Teoh SH (2002) Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 23(4):1169–1185. https://doi.org/10.1016/S0142-9612(01)00232-0

Kalita SJ, Bose S, Hosick HL, Bandyopadhyay A (2003) Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling. Mater Sci Eng C 23(5):611–620. https://doi.org/10.1016/S0928-4931(03)00052-3

Kłodowski A, Eskelinen H, Semken S (2015) Leakage-proof nozzle design for RepRap community 3D printer. Robotica 33(4):721–746. https://doi.org/10.1017/S0263574714000502

Wittbrodt BT, Glover AG, Laureto J, Anzalone GC, Oppliger D, Irwin JL, Pearce JM (2013) Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers. Mechatronics 23(6):713–726. https://doi.org/10.1016/j.mechatronics.2013.06.002

Nuchitprasitchai S, Roggemann M, Pearce JM (2017) Factors effecting real-time optical monitoring of fused filament 3D printing. Prog Addit Manuf 2(3):133–149. https://doi.org/10.1007/s40964-017-0027-x

Singh J, Singh R, Singh H (2017) Experimental investigations for dimensional accuracy and surface finish of polyurethane prototypes fabricated by indirect rapid tooling: a case study. Prog Addit Manuf 2(1–2):85–97. https://doi.org/10.1007/s40964-017-0024-0

Islam MN, Pramanik A, Slamka S (2016) Errors in different geometric aspects of common engineering parts during rapid prototyping using a Z Corp 3D printer. Prog Addit Manuf 1(1–2):55–63. https://doi.org/10.1007/s40964-016-0006-7

Chohan JS, Singh R (2016) Enhancing dimensional accuracy of FDM based biomedical implant replicas by statistically controlled vapor smoothing process. Prog Addit Manuf 1(1–2):105–113. https://doi.org/10.1007/s40964-016-0009-4

Afrose MF, Masood SH, Iovenitti P, Nikzad M, Sbarski I (2016) Effects of part build orientations on fatigue behaviour of FDM-processed PLA material. Prog Addit Manuf 1(1–2):21–28. https://doi.org/10.1007/s40964-015-0002-3

Lederle F, Meyer F, Brunotte GP, Kaldun C, Hübner EG (2016) Improved mechanical properties of 3D-printed parts by fused deposition modeling processed under the exclusion of oxygen. Prog Addit Manuf 1(1–2):3–7. https://doi.org/10.1007/s40964-016-0010-y

Fang T, Bakhadyrov I, Jafari MA, Alpan G (1998) Online detection of defects in layered manufacturing. In: Proceedings of the 1998 IEEE international conference on robotics and automation, 1998, vol 1, pp 254–259. IEEE. https://doi.org/10.1109/ROBOT.1998.676386

Holzmond O, Li X (2017) In situ real time defect detection of 3D printed parts. Addit Manuf 17:135–142. https://doi.org/10.1016/j.addma.2017.08.003

Nuchitprasitchai S, Roggemann M, Pearce JM (2017) Factors effecting real-time optical monitoring of fused filament 3D printing. Prog Addit Manuf 2(3):133–149. https://doi.org/10.1007/s40964-017-0027-x

Nuchitprasitchai S, Roggemann MC, Pearce JM (2017) Three hundred and sixty degree real-time monitoring of 3-D printing using computer analysis of two camera views. J Manuf Mater Process 1(1):2. https://doi.org/10.3390/jmmp1010002

Lu L, Zheng J, Mishra S (2015) A layer-to-layer model and feedback control of ink-jet 3-d printing. IEEE/ASME Trans Mechatron 20(3):1056–1068. https://doi.org/10.1109/TMECH.2014.2366123

Cohen DL, Lipson H (2010) Geometric feedback control of discrete-deposition SFF systems. Rapid Prototyp J 16(5):377–393. https://doi.org/10.1108/13552541011065777

Faes M, Abbeloos W, Vogeler F, Valkenaers H, Coppens K, Goedeme T, Ferraris E (2014) Process monitoring of extrusion based 3D printing via laser scanning. In: International conference on polymers and moulds innovations (PMI) 2014 conference proceedings, vol 6, pp 363–367

Rao PK, Liu JP, Roberson D, Kong ZJ, Williams C (2015) Online real-time quality monitoring in additive manufacturing processes using heterogeneous sensors. J Manuf Sci Eng 137(6):061007. https://doi.org/10.1115/1.4029823

Sun H, Rao PK, Kong ZJ, Deng X, Jin R (2018) Functional quantitative and qualitative models for quality modeling in a fused deposition modeling process. IEEE Trans Autom Sci Eng 15(1):393–403. https://doi.org/10.1109/TASE.2017.2763609

Wu H, Wang Y, Yu Z (2016) In situ monitoring of FDM machine condition via acoustic emission. Int J Adv Manuf Technol 84(5–8):1483–1495. https://doi.org/10.1007/s00170-015-7809-4

Yang Z, Jin L, Yan Y, Mei Y (2018) Filament breakage monitoring in fused deposition modeling using acoustic emission technique. Sensors 18(3):749. https://doi.org/10.3390/s18030749

Baumann F, Schön M, Eichhoff J, Roller D (2016) Concept development of a sensor array for 3D printer. Procedia CIRP 51:24–31. https://doi.org/10.1016/j.procir.2016.05.041

Bukkapatnam S, Clark B (2007) Dynamic modeling and monitoring of contour crafting—an extrusion-based layered manufacturing process. J Manuf Sci Eng 129(1):135–142. https://doi.org/10.1115/1.2375137

Turner BN, Strong RA, Gold S (2014) A review of melt extrusion additive manufacturing processes: I. Process design and modeling. Rapid Prototyp J 20(3):192–204. https://doi.org/10.1108/RPJ-01-2013-0012

Tlegenov Y, Wong YS, Hong GS (2017) A dynamic model for nozzle clog monitoring in fused deposition modelling. Rapid Prototyp J 23(2):391–400. https://doi.org/10.1108/RPJ-04-2016-0054

Tlegenov Y, Hong GS, Lu WF (2018) Nozzle condition monitoring in 3D printing. Robot Comput Integr Manuf 54:45–55. https://doi.org/10.1016/j.rcim.2018.05.010

Tlegenov Y (2018) Model-based monitoring of nozzle clogging in fused deposition modelling process. Doctoral dissertation. National University of Singapore. Retrieved from https://scholarbank.nus.edu.sg/handle/10635/148549

Greeff G, Schilling M (2017) Closed loop control of slippage during filament transport in molten material extrusion. Additive Manufacturing 14:31–38. https://doi.org/10.1016/j.addma.2016.12.005