A dynamic-model-based fault diagnosis method for a wind turbine planetary gearbox using a deep learning network

Institute of Electrical and Electronics Engineers (IEEE) - 2022
Dongdong Li1, Yang Zhao1, Yao Zhao1
1School of Electrical Engineering, Shanghai University of Electric Power, Shanghai, China

Tóm tắt

AbstractThe planetary gearbox is a critical part of wind turbines, and has great significance for their safety and reliability. Intelligent fault diagnosis methods for these gearboxes have made some achievements based on the availability of large quantities of labeled data. However, the data collected from the diagnosed devices are always unlabeled, and the acquisition of fault data from real gearboxes is time-consuming and laborious. As some gearbox faults can be conveniently simulated by a relatively precise dynamic model, the data from dynamic simulation containing some features are related to those from the actual machines. As a potential tool, transfer learning adapts a network trained in a source domain to its application in a target domain. Therefore, a novel fault diagnosis method combining transfer learning with dynamic model is proposed to identify the health conditions of planetary gearboxes. In the method, a modified lumped-parameter dynamic model of a planetary gear train is established to simulate the resultant vibration signal, while an optimized deep transfer learning network based on a one-dimensional convolutional neural network is built to extract domain-invariant features from different domains to achieve fault classification. Various groups of transfer diagnosis experiments of planetary gearboxes are carried out, and the experimental results demonstrate the effectiveness and the reliability of both the dynamic model and the proposed method.

Từ khóa


Tài liệu tham khảo

Nadour, M., Essadki, A., & Nasser, T. (2020). Improving low-voltage ride-through capability of a multimegawatt DFIG based wind turbine under grid faults. Protection and Control of Modern Power Systems, 5(4), 102–114.

Salameh, J. P., Cauet, S., Etien, E., Sakout, A., & Rambault, L. (2018). Gearbox condition monitoring in wind turbines: A review. Mechanical Systems and Signal Processing, 111, 251–264.

Leite, G. D. N. P., Araújo, A. M., & Rosas, P. A. C. (2018). Prognostic techniques applied to maintenance of wind turbines: A concise and specific review. Renewable and Sustainable Energy Reviews, 81, 1917–1925.

Desai, J. P., & Makwana, V. H. (2021). A novel out of step relaying algorithm based on wavelet transform and a deep learning machine model. Protection and Control of Modern Power Systems, 6(4), 500–511.

Jiang, G., He, H., Yan, J., & Xie, P. (2019). Multiscale convolutional neural networks for fault diagnosis of wind turbine gearbox. IEEE Transactions on Industrial Electronics, 66(4), 3196–3207.

Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2020). Gearbox fault diagnosis using a deep learning model with limited data sample. IEEE Transactions on Industrial Informatics, 16(10), 6263–6271.

Liu, R., Yang, B., Zio, E., & Chen, X. (2018). Artificial intelligence for fault diagnosis of rotating machinery: A review. Mechanical Systems and Signal Processing, 108, 33–47.

Zhao, M., Kang, M., Tang, B., & Pecht, M. (2018). Deep residual networks with dynamically weighted wavelet coefficients for fault diagnosis of planetary gearboxes. IEEE Transactions on Industrial Electronics, 65(5), 4290–4300.

Su, X., Shan, Y., Zhou, W., & Fu, Y. (2021). GRU and attention mechanism-based condition monitoring of an offshore wind turbine gearbox. Power System Protection and Control, 49(24), 141–149. (in Chinese).

Ding, S., Li, X., Hang, J., Wang, Y., & Wang, Q. (2020). Deep learning theory and its application to fault diagnosis of an electric machine. Power System Protection and Control, 48(8), 172–187. (in Chinese).

Jiao, J., Zhao, M., & Lin, J. (2020). Unsupervised adversarial adaptation network for intelligent fault diagnosis. IEEE Transactions on Industrial Electronics, 67(11), 9904–9913.

Guo, L., Lei, Y., Xing, S., Yan, T., & Li, N. (2019). Deep convolutional transfer learning network: A new method for intelligent fault diagnosis of machines with unlabeled data. IEEE Transactions on Industrial Electronics, 66(9), 7316–7325.

Mao, W., Liu, Y., Ding, L., Safian, A., & Liang, X. (2021). A New structured domain adversarial neural network for transfer fault diagnosis of rolling bearings under different working conditions. ieEE Transactions on Instrumentation and Measurement, 70, 1–13.

Chen, Z., He, G., Li, J., Liao, Y., Gryllias, K., & Li, W. (2020). Domain adversarial transfer network for cross-domain fault diagnosis of rotary machinery. IEEE Transactions on Instrumentation and Measurement, 69, 8702–8712.

Shen, C., Wang, X., Wang, D., Li, Y., Zhu, J., & Gong, M. (2021). Dynamic joint distribution alignment network for bearing fault diagnosis under variable working conditions. IEEE Transactions on Instrumentation and Measurement, 70, 1–13.

Feng, L., & Zhao, C. (2021). Fault description based attribute transfer for zero-sample industrial fault diagnosis. IEEE Transactions on Industrial Informatics, 17, 1852–1862.

Li, X., Zhang, W., Ding, Q., & Li, X. (2020). Diagnosing rotating machines with weakly supervised data using deep transfer learning. IEEE Transactions on Industrial Informatics, 16, 1688–1697.

Xu, G., Liu, M., Jiang, Z., Shen, W., & Huang, C. (2020). Online fault diagnosis method based on transfer convolutional neural networks. IEEE Transactions on Instrumentation and Measurement, 69, 509–520.

Wang, J., Zhao, R., & Gao, R. X. (2020). Probabilistic transfer factor analysis for machinery autonomous diagnosis cross various operating conditions. IEEE Transactions on Instrumentation and Measurement, 69, 5335–5344.

Yang, B., Lei, Y., Jia, F., Li, N., & Du, Z. (2020). A polynomial Kernel induced distance metric to improve deep transfer learning for fault diagnosis of machines. IEEE Transactions on Industrial Electronics, 67(11), 9747–9757.

Persello, C., & Bruzzone, L. (2016). Kernel-based domain-invariant feature selection in hyperspectral images for transfer learning. IEEE Transactions on Geoscience and Remote Sensing, 54(5), 2615–2626.

Chen, Z., Gryllias, K., & Li, W. (2020). Intelligent fault diagnosis for rotary machinery using transferable convolutional neural network. IEEE Transactions on Industrial Informatics, 16(1), 339–349.

Lu, W., Liang, B., Cheng, Y., Meng, D., Yang, J., & Zhang, T. (2017). Deep model based domain adaptation for fault diagnosis. IEEE Transactions on Industrial Electronics, 64(3), 2296–2305.

Xie, J., Zhang, L., Duan, L., and Wang, J. (2016). On cross-domain feature fusion in gearbox fault diagnosis under various operating conditions based on Transfer Component Analysis. In Proc. IEEE Int. Conf. Prognostics Health Manage, pp. 1–6.

Yang, B., Lei, Y., Jia, F., & Xing, S. (2019). An intelligent fault diagnosis approach based on transfer learning from laboratory bearings to locomotive bearings. Mechanical Systems and Signal Processing, 122, 692–706.

Inalpolat, M., & Kahraman, A. (2010). A dynamic model to predict modulation sidebands of a planetary gear set having manufacturing errors. Journal of Sound and Vibration, 329(4), 371–393.

Hong, L., Dhupia, J. S., & Sheng, S. (2014). An explanation of frequency features enabling detection of faults in equally spaced planetary gearbox. Mechanism and Machine Theory, 73, 169–183.

Eritenel, T., & Parker, R. G. (2012). An investigation of tooth mesh nonlinearity and partial contact loss in gear pairs using a lumped-parameter model. Mechanism and Machine Theory, 56, 28–51.

Liu, X., Yang, Y., & Zhang, J. (2018). Resultant vibration signal model-based fault diagnosis of a single stage planetary gear train with an incipient tooth crack on the sun gear. Renewable Energy, 122, 65–79.

Luo, Y., Baddour, N., & Liang, M. (2019). Dynamical modeling and experimental validation for tooth pitting and spalling in spur gears. Mechanical Systems and Signal Processing, 119, 155–181.

Parra, J., & Vicuña, C. M. (2017). Two methods for modeling vibrations of planetary gearboxes including faults: Comparison and validation. Mechanical Systems and Signal Processing, 92, 213–225.

Liang, X., Zuo, M. J., & Liu, L. (2016). A windowing and mapping strategy for gear tooth fault detection of a planetary gearbox. Mechanical Systems and Signal Processing, 80, 445–459.

Park, J., Ha, J. M., Oh, H., Youn, B. D., Choi, J., & Kim, N. H. (2016). Model-based fault diagnosis of a planetary gear: A novel approach using transmission error. IEEE Transactions on Reliability, 65(4), 1830–1841.

Shao, S., McAleer, S., Yan, R., & Baldi, P. (2019). Highly accurate machine fault diagnosis using deep transfer learning. IEEE Transactions on Industrial Informatics, 15(4), 2446–2455.

Han, T., Liu, C., Yang, W., & Jiang, D. (2019). A novel adversarial learning framework in deep convolutional neural network for intelligent diagnosis of mechanical faults. Knowledge-Based Systems, 165, 474–487.

Thông tin
Thông tin xuất bản

Institute of Electrical and Electronics Engineers (IEEE)

Thông tin tác giả