A detailed analysis of the determination of fracture toughness by nanoindentation induced radial cracks

Palmqvist, 1962, The work for the formation of a crack during Vickers indentation as a measure of the toughness of hard metals, Arch. Eisenhuettenwes, 33, 629 Palmqvist, 1957, Indentation hardness and fracture toughness in single crystal, Jernkontorets Ann., 141, 300 Lawn, 1980, Elastic/plastic indentation damage in ceramics: the median/radial crack system, J. Am. Ceram. Soc., 63, 574, 10.1111/j.1151-2916.1980.tb10768.x Anstis, 1981, A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements, J. Am. Ceram. Soc., 64, 533, 10.1111/j.1151-2916.1981.tb10320.x Laugier, 1987, Palmqvist indentation toughness in WC-Co composites, J. Mater. Sci. Lett., 6, 897, 10.1007/BF01729862 Laugier, 1987, New formula for indentation toughness in ceramics, J. Mater. Sci. Lett., 6, 355, 10.1007/BF01729352 Ponton, 1989, Vickers indentation fracture toughness test Part 1 Review of literature and formulation of standardised indentation toughness equations, Mater. Sci. Technol., 5, 865, 10.1179/mst.1989.5.9.865 Quinn, 2007, On the Vickers indentation fracture toughness test, J. Am. Ceram. Soc., 90, 673, 10.1111/j.1551-2916.2006.01482.x Quinn, 2007, Fracture toughness of ceramics by the Vickers indentation crack length method: a critical review, Ceramic Engineering and Science Proceedings, 45 Morrell, 2006, Fracture toughness testing for advanced technical ceramics: internationally agreed good practice, Adv. Appl. Ceram., 105, 88, 10.1179/174367606X84422 Marshall, 2015, The compelling case for indentation as a functional exploratory and characterization tool, J. Am. Ceram. Soc., 98, 2671, 10.1111/jace.13729 Schiffmann, 2011, Determination of fracture toughness of bulk materials and thin films by nanoindentation: comparison of different models, Philos. Mag., 91, 1163, 10.1080/14786435.2010.487984 Ponton, 1989, Vickers indentation fracture toughness test Part 2 Application and critical evaluation of standardised indentation toughness equations, Mater. Sci. Technol., 5, 961, 10.1179/mst.1989.5.10.961 Pharr, 1993, 449 Cuadrado, 2015, Geometry of nanoindentation cube-corner cracks observed by FIB tomography: implication for fracture resistance estimation, J. Eur. Ceram. Soc., 35, 2949, 10.1016/j.jeurceramsoc.2015.03.031 Cuadrado, 2012, Evaluation of fracture toughness of small volumes by means of cube-corner nanoindentation, Scr. Mater., 66, 670, 10.1016/j.scriptamat.2012.01.033 Oliver, 1992, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 7, 1564, 10.1557/JMR.1992.1564 Richter, 2006, Substrate influence in Young’s modulus determination of thin films by indentation methods: cubic boron nitride as an example, Surf. Coat. Technol., 201, 3577, 10.1016/j.surfcoat.2006.08.124 Guo, 2019, A novel way to quantitatively determine the mechanical properties of thin films from the initial-grown surface by nanoindentation, Appl. Surf. Sci., 479, 253, 10.1016/j.apsusc.2019.02.075 Cook, 1990, Direct observation and analysis of indentation cracking in glasses and ceramics, J. Am. Ceram. Soc., 73, 787, 10.1111/j.1151-2916.1990.tb05119.x Hull, 1999 Žagar, 2016, Fracture toughness measurement in fused quartz using triangular chevron-notched micro-cantilevers, Scr. Mater., 112, 132, 10.1016/j.scriptamat.2015.09.032 Wood, 1982, Empirical evaluation of fracture toughness: the toughness of quartz, Am. Mineral., 67, 1065 Morris, 2004, In situ cube‐corner indentation of soda–lime glass and fused silica, J. Am. Ceram. Soc., 87, 1494, 10.1111/j.1551-2916.2004.01494.x Cook, 1986 Ebrahimi, 1999, Fracture anisotropy in silicon single crystal, Mater. Sci. Eng. A, 268, 116, 10.1016/S0921-5093(99)00077-5 Jang, 2008, Influence of indenter angle on cracking in Si and Ge during nanoindentation, Acta Mater., 56, 4458, 10.1016/j.actamat.2008.05.005 Dukino, 1992, Comparative measurement of indentation fracture toughness with Berkovich and Vickers indenters, J. Am. Ceram. Soc., 75, 3299, 10.1111/j.1151-2916.1992.tb04425.x Munroe, 2009, The application of focused ion beam microscopy in the material sciences, Mater. Charact., 60, 2, 10.1016/j.matchar.2008.11.014 Lawn, 2012, Probing material properties with sharp indenters: a retrospective, J. Mater. Sci., 47, 1, 10.1007/s10853-011-5865-1 Marshall, 1977, An indentation technique for measuring stresses in tempered glass surfaces, J. Am. Ceram. Soc.-Discussions Notes, 60, 86, 10.1111/j.1151-2916.1977.tb16106.x Davis, 1993, Fiber coating concepts for brittle‐matrix composites, J. Am. Ceram. Soc., 76, 1249, 10.1111/j.1151-2916.1993.tb03749.x Malzbender, 2000, Elastic modulus, hardness and fracture toughness of SiO2-filled methyltrimethoxysilane coatings on glass substrates, J. Non. Solids, 265, 51, 10.1016/S0022-3093(99)00889-3 Zhao, 2004, Enhancement of fracture toughness in nanostructured diamond–SiC composites, Appl. Phys. Lett., 84, 1356, 10.1063/1.1650556 Voronin, 2004, Properties of nanostructured diamond-silicon carbide composites sintered by high pressure infiltration technique, J. Mater. Res., 19, 2703, 10.1557/JMR.2004.0345