A decoupling approach for time-dependent robust optimization with application to power semiconductor devices

Robinson, 2004, Robust parameter design: a review, Qual. Reliab. Eng. Int., 20, 81, 10.1002/qre.602 Venkayya, 1978, Structural optimization: a review and some recommendations, Int. J. Numer. Method Eng., 13, 203, 10.1002/nme.1620130202 Li, 2019, Extending SORA method for reliability-based design optimization using probability and convex set mixed models, Struct. Multidiscip. Optim., 59, 1163, 10.1007/s00158-018-2120-2 Beyer, 2007, Robust optimization-a comprehensive survey, Comput. Method Appl. Mech. Eng., 196, 3190, 10.1016/j.cma.2007.03.003 Chatterjee, 2019, Decoupling uncertainty quantification from robust design optimization, Struct. Multidiscip. Optim., 59, 1969, 10.1007/s00158-018-2167-0 Chatterjee, 2021, A global two-layer meta-model for response statistics in robust design optimization, Eng. Optim, 1, 1 Taguchi, 1989, Quality engineering through design optimization, 77 Messac, 2002, Multiobjective robust design using physical programming, Struct. Multidiscip. Optim., 23, 357, 10.1007/s00158-002-0196-0 Rojas, 2008, Channel signal-to-noise ratio constrained feedback control: performance and robustness, IET Control Theory Appl., 2, 595, 10.1049/iet-cta:20070246 Biedermann, 2006, Some robust design strategies for percentile estimation in binary response models, Can. J. Stat., 34, 603, 10.1002/cjs.5550340404 Abu-Shawiesh, 2009, A control chart based on robust estimators for monitoring the process mean of a quality characteristic, Int. J. Qual. Reliab. Manag., 26, 480, 10.1108/02656710910956201 Tsui, 1999, Modeling and analysis of dynamic robust design experiments, IIE Trans., 31, 1113, 10.1080/07408179908969912 Wu, 2009, Robust design of nonlinear multiple dynamic quality characteristics, Comput. Ind. Eng., 56, 1328, 10.1016/j.cie.2008.08.001 Alhmoud, 2018, Reliability improvement for a high-power IGBT in wind energy applications, IEEE Trans. Ind. Electron., 65, 7129, 10.1109/TIE.2018.2795568 Zhang, 2017, Time-dependent reliability analysis through response surface method, J. Mech. Des., 139, 041404, 10.1115/1.4035860 Hu, 2013, Time-dependent reliability analysis with joint upcrossing rates, Struct. Multidiscip. Optim., 48, 893, 10.1007/s00158-013-0937-2 Stewart, 1998, Time-dependent reliability of deteriorating reinforced concrete bridge decks, Struct. Saf., 20, 91, 10.1016/S0167-4730(97)00021-0 Goethals, 2010, The development of a robust design methodology for time-oriented dynamic quality characteristics with a target profile, Qual. Reliab. Eng. Int., 27, 403, 10.1002/qre.1122 Du, 2012, Toward time-dependent robustness metrics, J. Mech. Des., 134, 011004, 10.1115/1.4005445 Wei, 2020, Robustness metric for robust design optimization under time- and space-dependent uncertainty through metamodeling, J. Mech. Des., 142, 031110, 10.1115/1.4045599 Wang, 2014, Dynamic reliability-based robust design optimization with time-variant probabilistic constraints, Eng. Optim., 46, 784, 10.1080/0305215X.2013.795561 Yu, 2019, Time-dependent reliability-based robust design optimization using evolutionary algorithm, J. Risk Uncertain. Eng. Sys. Part B Mech. Eng., 5, 020911 Zafar, 2020, An efficient kriging based method for time-dependent reliability based robust design optimization via evolutionary algorithm, Comput. Method. Appl. Mech., 372, 113386, 10.1016/j.cma.2020.113386 Chakraborty, 2017, A surrogate based multi-fidelity approach for robust design optimization, Appl. Math. Model., 47, 726, 10.1016/j.apm.2017.03.040 Chatterjee, 2018, Analytical moment based approximation for robust design optimization, Struct. Multidiscip. Optim., 58, 2135, 10.1007/s00158-018-2029-9 Chatterjee, 2017, A critical review of surrogate assisted robust design optimization, Arch. Comput. Method Eng., 26, 245, 10.1007/s11831-017-9240-5 SARVAR, 1999, Thermal design of high power semiconductor packages for aircraft systems, J. Electron. Manuf., 9, 269, 10.1142/S0960313199000180 Wu, 2018, Automated heatsink optimization for air-cooled power semiconductor modules, IEEE Trans. Power Electron., 34, 5027, 10.1109/TPEL.2018.2881454 Yang, 2015, Robust stability analysis of active voltage control for high-power IGBT switching by Kharitonov's theorem, IEEE Trans. Power Electron., 31, 2584, 10.1109/TPEL.2015.2439712 Rashidi, 2020, Multi-objective design and optimization of power electronics converters with uncertainty quantification—part I: parametric uncertainty, IEEE Trans. Power Electron., 36, 1463, 10.1109/TPEL.2020.3005456 Zárate-Miñano, 2016, Construction of SDE-based wind speed models with exponentially decaying autocorrelation, Renew Energy, 94, 186, 10.1016/j.renene.2016.03.026 Lee, 2001, Robust optimization considering tolerances of design variables, Comput. Struct., 79, 77, 10.1016/S0045-7949(00)00117-6 Huang, 2007, Analytical robustness assessment for robust design, Struct. Multidiscip. Optim., 34, 123, 10.1007/s00158-006-0068-0 Saha, 2011, Practical robust design optimization using evolutionary algorithms, J. Mech. Des., 133, 101012, 10.1115/1.4004807 Ma, 2018, Application-oriented robust design optimization method for batch production of permanent-magnet motors, IEEE Trans. Ind. Electron., 65, 1728, 10.1109/TIE.2017.2748046 Du, 2000, Towards a better understanding of modeling feasibility robustness in engineering design, J. Mech. Des., 122, 385, 10.1115/1.1290247 Rackwitz, 2001, Reliability analysis-a review and some perspectives, Struct. Saf., 23, 365, 10.1016/S0167-4730(02)00009-7 Cardoso, 2008, Structural reliability analysis using Monte Carlo simulation and neural networks, Adv. Eng. Softw., 39, 505, 10.1016/j.advengsoft.2007.03.015 Byrd, 2016, A stochastic quasi-newton method for large-scale optimization, SIAM. J. Optim., 26, 1008, 10.1137/140954362 Burke, 1989, A robust sequential quadratic programming method, Math. Progr., 43, 277, 10.1007/BF01582294 Yang, 2011, An industry-based survey of reliability in power electronic converters, IEEE Trans. Ind. Appl., 47, 1441, 10.1109/TIA.2011.2124436 Del Rosario, 2019, Cutting the double loop: theory and algorithms for reliability-based design optimization with parametric uncertainty, Int. J. Numer. Method Eng., 118, 718, 10.1002/nme.6035 Suhir, 2009, Predictive analytical thermal stress modeling in electronics and photonics, Appl. Mech. Rev., 62, 10.1115/1.3077136 Wang, 2001, Applying Anand model to represent the viscoplastic deformation behavior of solder alloys, J. Electron. Packag., 123, 247, 10.1115/1.1371781 Huang, 2021, Optimization of the pressure distribution in press-pack insulated gate bipolar transistors, Struct. Multidiscip. Optim., 63, 855, 10.1007/s00158-020-02713-1