A crystal plasticity model of low cycle fatigue damage considering dislocation density, stress triaxiality and Lode parameter

Zhao, 2008, Fatigue of 7075–T651 aluminum alloy, Int J Fatigue, 30, 834, 10.1016/j.ijfatigue.2007.07.005 Chen, 2017, Investigation on longitudinal weld seams during porthole die extrusion process of high strength 7075 aluminum alloy, Int J Adv Manuf Technol, 91, 1897, 10.1007/s00170-016-9902-8 Xiao, 2022, Improved forming capability of 7075 aluminum alloy using electrically assisted electromagnetic forming, Mater Charact, 183, 10.1016/j.matchar.2021.111615 Imran, 2019, Characterization of Al-7075 metal matrix composites: a review, J Mater Res Technol, 8, 3347, 10.1016/j.jmrt.2017.10.012 Isadare, 2013, Effect of heat treatment on some mechanical properties of 7075 aluminium alloy, Mater Res, 16, 190, 10.1590/S1516-14392012005000167 Liew, 2013, Evaluation on tribological design coatings of Al2O3, Ni-P-PTFE and MoS2 on aluminium alloy 7075 under oil lubrication, Mater Des, 48, 77, 10.1016/j.matdes.2012.08.010 Zhao, 2008, A study of fatigue crack growth of 7075–T651 aluminum alloy, Int J Fatigue, 30, 1169, 10.1016/j.ijfatigue.2007.09.006 Turkmen, 2003, On the mechanical behaviour of AA 7075–T6 during cyclic loading, Int J Fatigue, 25, 267, 10.1016/S0142-1123(02)00149-4 Vassilopoulos, 2020, The history of fiber-reinforced polymer composite laminate fatigue, Int J Fatigue, 134, 10.1016/j.ijfatigue.2020.105512 Mughrabi, 2009, Cyclic slip irreversibilities and the evolution of fatigue damage, Metall Mater Trans A, 40, 1257, 10.1007/s11661-009-9839-8 Hong, 2020, Fatigue damage mechanism of AL6XN austenitic stainless steel at high temperatures, Acta Metall Sin-Engl Lett, 33, 799, 10.1007/s40195-020-01020-4 Shao, 2017, Butterfly effect in low-cycle fatigue: importance of microscopic damage mechanism, Scr Mater, 140, 76, 10.1016/j.scriptamat.2017.07.007 Li, 2013, The effect of prior deformation on subsequent microplasticity and damage evolution in an austenitic stainless steel at elevated temperature, Acta Mater, 61, 3575, 10.1016/j.actamat.2013.02.038 Niezgoda, 2014, Stochastic modeling of twin nucleation in polycrystals: an application in hexagonal close-packed metals, Int J Plast, 56, 119, 10.1016/j.ijplas.2013.11.005 Khademi, 2021, On the correlation between plastic strain and misorientation in polycrystalline body-centered-cubic microstructures with an emphasis on the grain size, loading history, and crystallographic orientation, Int J Plast, 146, 10.1016/j.ijplas.2021.103084 Bhattacharyya, 2011, A phase-field model of stress effect on grain boundary migration, Model Simul Mater Sci Eng, 19, 10.1088/0965-0393/19/3/035002 Arul Kumar, 2016, Effect of local stress fields on twin characteristics in HCP metals, Acta Mater, 116, 143, 10.1016/j.actamat.2016.06.042 Ekh, 2004, A model framework for anisotropic damage coupled to crystal (visco)plasticity, Int J Plast, 20, 2143, 10.1016/j.ijplas.2004.04.007 Yuan, 2020, Low-cycle fatigue life prediction of a polycrystalline nickel-base superalloy using crystal plasticity modelling approach, J Mater Sci Technol, 38, 28, 10.1016/j.jmst.2019.05.072 Zhang, 2020, Crystal plasticity finite-element modelling of cyclic deformation and crack initiation in a nickel-based single-crystal superalloy under low-cycle fatigue, Fatigue Fract Eng Mater Struct, 43, 1769, 10.1111/ffe.13228 Briffod, 2017, Microstructure modeling and crystal plasticity simulations for the evaluation of fatigue crack initiation in α-iron specimen including an elliptic defect, Mater Sci Eng A, 695, 165, 10.1016/j.msea.2017.04.030 Lin, 2011, A crystal plasticity study of cyclic constitutive behaviour, crack-tip deformation and crack-growth path for a polycrystalline nickel-based superalloy, Eng Fract Mech, 78, 2174, 10.1016/j.engfracmech.2011.04.006 Zhu, 2023, Experimental investigation and crystal plasticity modeling of combined high and low cycle loading on AISI 4140 steel, Int J Fatigue, 168, 10.1016/j.ijfatigue.2022.107465 Zhang, 2015, Micromechanics based fatigue life prediction of a polycrystalline metal applying crystal plasticity, Mech Mater, 85, 16, 10.1016/j.mechmat.2015.01.020 Wang, 2014, Tension/compression asymmetry of [001] single-crystal nickel-based superalloy DD6 during low cycle fatigue, Mater Sci Eng A, 593, 31, 10.1016/j.msea.2013.09.013 Li, 2017, A multi-scale crystal plasticity model for cyclic plasticity and low-cycle fatigue in a precipitate-strengthened steel at elevated temperature, J Mech Phys Solids, 101, 44, 10.1016/j.jmps.2016.12.010 Eghtesad, 2021, A full-field crystal plasticity model including the effects of precipitates: application to monotonic, load reversal, and low-cycle fatigue behavior of Inconel 718, Mater Sci Eng A, 803, 10.1016/j.msea.2020.140478 Hasunuma, 2019, Crystal plasticity FEM analysis for variation of surface morphology under low cycle fatigue condition of austenitic stainless steel, Int J Fatigue, 127, 488, 10.1016/j.ijfatigue.2019.06.032 Ashton, 2018, A strain-gradient, crystal plasticity model for microstructure-sensitive fretting crack initiation in ferritic-pearlitic steel for flexible marine risers, Int J Fatigue, 111, 81, 10.1016/j.ijfatigue.2018.01.028 Zhao, 2022, Fatigue crack propagation across grain boundary of Al-Cu-Mg bicrystal based on crystal plasticity XFEM and cohesive zone model, J Mater Sci Technol, 126, 275, 10.1016/j.jmst.2022.03.020 Gupta, 2021, Crystal plasticity model for single crystal Ni-based superalloys: capturing orientation and temperature dependence of flow stress, Int J Plast, 137, 10.1016/j.ijplas.2020.102896 Huang, 2016, Effect of strain rate and deformation temperature on strain hardening and softening behavior of pure copper, Trans Nonferrous Met Soc China, 26, 1044, 10.1016/S1003-6326(16)64201-2 Srivastava, 2020, Repulsion leads to coupled dislocation motion and extended work hardening in bcc metals, Nat Commun, 11, 5098, 10.1038/s41467-020-18774-1 Madec, 2002, From dislocation junctions to forest hardening, Phys Rev Lett, 89, 10.1103/PhysRevLett.89.255508 Huang, 1992, A dislocation model of low-cycle fatigue damage and derivation of the Coffin-Manson equation, Mater Lett, 15, 212, 10.1016/0167-577X(92)90147-C Wang, 2022, Crystal plasticity theory coupled with meso-damage to predict the ratchetting behavior of nickel-based single crystal superalloy, Int J Fatigue, 165, 10.1016/j.ijfatigue.2022.107220 Liu, 2019, Crystal plasticity model to predict fatigue crack nucleation based on the phase transformation theory, Acta Mechanica Sinica, 35, 1033, 10.1007/s10409-019-00876-9 Zhang, 2023, High cycle fatigue life prediction model based on crystal plasticity and continuum damage mechanics for Ni-based single crystal superalloys under a multiaxial stress state, Int J Plast, 162, 10.1016/j.ijplas.2023.103526 Zhang, 2021, Stress-controlled LCF experiments and ratcheting behaviour simulation of a nickel-based single crystal superalloy with [001] orientation, Chin J Aeronaut, 34, 112, 10.1016/j.cja.2020.05.030 Dunne, 2007, Experimental and computational studies of low cycle fatigue crack nucleation in a polycrystal, Int J Plast, 23, 273, 10.1016/j.ijplas.2006.07.001 Balobanov, 2022, Crystal plasticity modeling of grey cast irons under tension, compression and fatigue loadings, Crystals, 12, 238, 10.3390/cryst12020238 Lindroos, 2019, Micromechanical modeling of short crack nucleation and growth in high cycle fatigue of martensitic microstructures, Comput Mater Sci, 170, 10.1016/j.commatsci.2019.109185 Brünig, 2013, Micro-mechanical studies on the effect of the stress triaxiality and the Lode parameter on ductile damage, Int J Plast, 50, 49, 10.1016/j.ijplas.2013.03.012 Yu, 2018, Constitutive analysis of pressure-insensitive metals under axisymmetric tensile loading: a stress triaxiality-dependent plasticity damage model, Int J Mech Sci, 142–143, 21, 10.1016/j.ijmecsci.2018.04.035 Brünig, 2011, Numerical analyses of stress-triaxiality-dependent inelastic deformation behavior of aluminum alloys, Int J Damage Mech, 20, 299, 10.1177/1056789509351837 Cao, 2014, A Lode-dependent enhanced Lemaitre model for ductile fracture prediction at low stress triaxiality, Eng Fract Mech, 124–125, 80, 10.1016/j.engfracmech.2014.03.021 Frodal, 2021, On the coupling of damage and single crystal plasticity for ductile polycrystalline materials, Int J Plast, 142, 10.1016/j.ijplas.2021.102996 Lemaitre, 1985, Coupled elasto-plasticity and damage constitutive equations, Comput Meth Appl Mech Eng, 51, 31, 10.1016/0045-7825(85)90026-X Rehrl, 2012, Crystal orientation changes: a comparison between a crystal plasticity finite element study and experimental results, Acta Mater, 60, 2379, 10.1016/j.actamat.2011.12.052 Lemaitre, 1985, A continuous damage mechanics model for ductile fracture, J Eng Mater Technol, 107, 83, 10.1115/1.3225775 Zhou, 2022, An extended crystal plasticity model to simulate the deformation behaviors of hybrid stress–strain controlled creep-fatigue interaction loading, Int J Fatigue, 156, 10.1016/j.ijfatigue.2021.106680 Sastry, 1974, Stacking fault energy and its influence on high-temperature plastic flow in Zr-Sn alloys, Philos Mag, 30, 115, 10.1080/14786439808206538 Lee, 2010, A dislocation density-based single crystal constitutive equation, Int J Plast, 26, 925, 10.1016/j.ijplas.2009.11.004 Feltner, 1965, A debris mechanism of cyclic strain hardening for F.C.C. metals, Philos Mag, 12, 1229, 10.1080/14786436508228673 Kocks, 1966, A statistical theory of flow stress and work-hardening, Philos Mag, 13, 541, 10.1080/14786436608212647 Zecevic, 2015, A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: application to AA6022-T4, Int J Plast, 72, 200, 10.1016/j.ijplas.2015.05.018 Sharma, 2022, Multi-strain path deformation behavior of AA6016-T4: experiments and crystal plasticity modeling, Int J Solids Struct, 244–245 Liu, 2018, Experimental and computational study of microstructural effect on ductile fracture of hot-forming materials, Mater Sci Eng A, 724, 298, 10.1016/j.msea.2018.03.049 Khadyko, 2016, Latent hardening and plastic anisotropy evolution in AA6060 aluminium alloy, Int J Plast, 76, 51, 10.1016/j.ijplas.2015.07.010 Kitayama, 2013, A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. application to low carbon steels, Int J Plast, 46, 54, 10.1016/j.ijplas.2012.09.004 Wen, 2015, Mechanical behavior of Mg subjected to strain path changes: experiments and modeling, Int J Plast, 73, 171, 10.1016/j.ijplas.2014.10.009 Matvienko, 2021, Evolution of fracture mechanics parameters relevant to narrow notch increment as a measure of fatigue damage accumulation, Int J Fatigue, 149, 10.1016/j.ijfatigue.2021.106310 Shang, 2021, The effect of stress state and strain partition mode on the damage behavior of a Mg-Ca alloy, Int J Plast, 144, 10.1016/j.ijplas.2021.103040 Li, 2020, A constitutive model coupling damage and material anisotropy for wide stress triaxiality, Chin J Aeronaut, 33, 3509, 10.1016/j.cja.2020.09.018 Malcher, 2014, An improved damage evolution law based on continuum damage mechanics and its dependence on both stress triaxiality and the third invariant, Int J Plast, 56, 232, 10.1016/j.ijplas.2014.01.002 Lu, 2020, Investigation of yield surfaces evolution for polycrystalline aluminum after pre-cyclic loading by experiment and crystal plasticity simulation, Materials, 13, 3069, 10.3390/ma13143069 Bong, 2020, Predicting forming limit diagrams for magnesium alloys using crystal plasticity finite elements, Int J Plast, 126, 10.1016/j.ijplas.2019.11.009 Zhang, 2021, A modified kinematic hardening model considering hetero-deformation induced hardening for bimodal structure based on crystal plasticity, Int J Mech Sci, 191, 10.1016/j.ijmecsci.2020.106068 Xu, 2012, Research on low cycle fatigue behavior and damage mechanism of 7075 aluminum alloy Luo J, Kang G, Shi M. Simulation to the cyclic deformation of polycrystalline aluminum alloy using crystal plasticity finite element method. Int J Comput Mater Sci Eng 2013;2(03n04):1350019. Aoba, 2017, Effects of aging on mechanical properties and microstructure of multi-directionally forged 7075 aluminum alloy, Mater Sci Eng A, 700, 220, 10.1016/j.msea.2017.06.017 Pesin, 2015, Numerical study of grain evolution and dislocation density during asymmetric rolling of aluminum alloy 7075, Key Eng Mater, 685, 162, 10.4028/www.scientific.net/KEM.685.162 Masih, 2015, Identification and validation of a low cycle fatigue damage model for Al 7075–T6 alloy, J Eng Mater Technol, 137, 10.1115/1.4028840 Zhang, 2013, Micro-bending of metallic crystalline foils by non-local dislocation density based crystal plasticity finite element model, Trans Nonferrous Met Soc China, 23, 3362, 10.1016/S1003-6326(13)62876-9 Hu, 2022, Simultaneous enhancement of strength and ductility in friction stir processed 2205 duplex stainless steel with a bimodal structure: experiments and crystal plasticity modeling, Sci China Phys Mech Astron, 65, 10.1007/s11433-021-1807-y Li, 2014, A texture-based representative volume element crystal plasticity model for predicting Bauschinger effect during cyclic loading, Mater Sci Eng A, 608, 174, 10.1016/j.msea.2014.04.067 Yuan, 2020, Investigations of micro-notch effect on small fatigue crack initiation behaviour in nickel-based alloy GH4169: experiments and simulations, Int J Fatigue, 136, 10.1016/j.ijfatigue.2020.105578 Zhou, 2020, Experimental study and crystal plasticity finite element simulations of nano-indentation-induced lattice rotation and the underlying mechanism in TC6 single α-grain, Mater Des, 188, 10.1016/j.matdes.2019.108423 Zheng, 2022, Influence of grain orientation and grain boundary features on local stress state of Cu-8Al-11Mn alloy investigated using crystal plasticity finite element method, Materials, 15, 6950, 10.3390/ma15196950