A corrugated gradient mechanical metamaterial: Lightweight, tunable auxeticity and enhanced specific energy absorption

Zhang, 2021, Quasi-static in-plane compression of zig-zag folded metamaterials at large plastic strains, Thin-Walled Struct., 159, 10.1016/j.tws.2020.107285 Xin, 2020, 4D printing auxetic metamaterials with tunable, programmable, and reconfigurable mechanical properties, Adv. Funct. Mater., 30, 10.1002/adfm.202004226 Frenzel, 2017, Three-dimensional mechanical metamaterials with a twist, Science, 358, 1072, 10.1126/science.aao4640 Tabacu, 2021, A theoretical model for the estimate of the reaction force for 3D auxetic anti-tetra chiral tubular structures under tensile loads, Thin-Walled Struct., 168, 10.1016/j.tws.2021.108304 Wang, 2021, Latitude-and-longitude-inspired three-dimensional auxetic metamaterials, Extreme Mech. Lett., 42, 10.1016/j.eml.2020.101142 Chen, 2021, A novel gradient negative stiffness honeycomb for recoverable energy absorption, Composites, Part B, 215, 10.1016/j.compositesb.2021.108745 Tan, 2020, Real-time tunable negative stiffness mechanical metamaterial, Extreme Mech. Lett., 41, 10.1016/j.eml.2020.100990 Ren, 2018, Mechanical performance of multidirectional buckling-based negative stiffness metamaterials: An analytical and numerical study, Materials, 11, 1078, 10.3390/ma11071078 Li, 2021, Thermal fluctuations of the optical properties of nanomechanical photonic metamaterials, Adv. Opt. Mater., 10 Xiong, 2022, Microscopies enabled by photonic metamaterials, Sensors (Basel, Switzerland), 22, 1086, 10.3390/s22031086 Lin, 2021, Graphene multilayer photonic metamaterials: fundamentals and applications, Adv. Mater. Technol., 6, 10.1002/admt.202000963 Peng, 2021, A novel hybrid-honeycomb structure: Enhanced stiffness, tunable auxeticity and negative thermal expansion, Int. J. Mech. Sci., 190, 10.1016/j.ijmecsci.2020.106021 Li, 2021, Experimental demonstration of lightweight lattice metamaterials with controllable low thermal expansion, Thin-Walled Struct., 159, 10.1016/j.tws.2020.107112 Fan, 2021, A review of additive manufacturing of metamaterials and developing trends, Mater. Today, 50, 303, 10.1016/j.mattod.2021.04.019 Xing, 2021, Reconfigurable liquid electromagnetic metamaterials driven by magnetic fields, Appl. Phys. Express, 14, 10.35848/1882-0786/abe98e Luo, 2021, Evolution of the electromagnetic manipulation: From tunable to programmable and intelligent metasurfaces, Micromachines, 12, 988, 10.3390/mi12080988 Chen, 2020, 3D-Printed short carbon fibre reinforced perforated structures with negative Poisson’s ratios: Mechanisms and design, Compos. Struct., 236, 10.1016/j.compstruct.2020.111859 Li, 2017, Bending behavior of sandwich composite structures with tunable 3D-printed core materials, Compos. Struct., 175, 46, 10.1016/j.compstruct.2017.05.001 Spadoni, 2006, Dynamic response of chiral truss-core assemblies, J. Intell. Mater. Syst. Struct., 17, 941, 10.1177/1045389X06060219 Scarpa, 2008, Auxetic materials for bioprostheses, IEEE Signal Process. Mag., 25, 126, 10.1109/MSP.2008.926663 Silverberg, 2014, Using origami design principles to fold reprogrammable mechanical metamaterials, Science, 345, 647, 10.1126/science.1252876 Bueckmann, 2014, An elasto-mechanical unfeelability cloak made of pentamode metamaterials, Nature Commun., 5, 4130, 10.1038/ncomms5130 Frenzel, 2016, Tailored buckling microlattices as reusable light-weight shock absorbers, Adv. Mater., 28, 5865, 10.1002/adma.201600610 Wei, 2021, In-plane compression behaviors of the auxetic star honeycomb: Experimental and numerical simulation, Aerosp. Sci. Technol., 115, 10.1016/j.ast.2021.106797 Sarvestani, 2018, 3D Printed meta-sandwich structures: Failure mechanism, energy absorption and multi-hit capability, Mater. Des., 160, 179, 10.1016/j.matdes.2018.08.061 Zhang, 2020, Biomechanical influence of structural variation strategies on functionally graded scaffolds constructed with triply periodic minimal surface, Addit. Manuf., 32 Hou, 2018, 3D Printed continuous fibre reinforced composite corrugated structure, Compos. Struct., 184, 1005, 10.1016/j.compstruct.2017.10.080 Rejab, 2013, The mechanical behaviour of corrugated-core sandwich panels, Composites, Part B, 47, 267, 10.1016/j.compositesb.2012.10.031 Cote, 2006, The compressive and shear responses of corrugated and diamond lattice materials, Int. J. Solids Struct., 43, 6220, 10.1016/j.ijsolstr.2005.07.045 Yang, 2017, Crashworthiness investigation of the bio-inspired bi-directionally corrugated core sandwich panel under quasi-static crushing load, Mater. Des., 135, 275, 10.1016/j.matdes.2017.09.040 Herrmann, 2005, Sandwich structures technology in commercial aviation - present applications and future trends, 13 Chen, 2017, Broadband and multiband vibration mitigation in lattice metamaterials with sinusoidally-shaped ligaments, Extreme Mech. Lett., 17, 24, 10.1016/j.eml.2017.09.012 Zhang, 2021, Mechanical design and energy absorption performances of rational gradient lattice metamaterials, Compos. Struct., 277, 10.1016/j.compstruct.2021.114606 Stankovic, 2015, A generalized optimality criteria method for optimization of additively manufactured multimaterial lattice structures, J. Mech. Design, 137, 10.1115/1.4030995 van Grunsven, 2014, Fabrication and mechanical characterisation of titanium lattices with graded porosity, Metals, 4, 401, 10.3390/met4030401 Davoodi, 2012, Development process of new bumper beam for passenger car: A review, Mater. Des., 40, 304, 10.1016/j.matdes.2012.03.060 Sun, 2014, Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness, Int. J. Impact Eng., 64, 62, 10.1016/j.ijimpeng.2013.10.004 Li, 2015, Comparison of functionally-graded structures under multiple loading angles, Thin-Walled Struct., 94, 334, 10.1016/j.tws.2015.04.030 Bai, 2019, Effective design of the graded strut of BCC lattice structure for improving mechanical properties, Materials, 12, 2192, 10.3390/ma12132192 Andrew, 2019, Impact performance enhancement of honeycombs through additive manufacturing-enabled geometrical tailoring, Int. J. Impact Eng., 134, 10.1016/j.ijimpeng.2019.103360 Andrew, 2022, Dynamic crushing of tailored honeycombs realized via additive manufacturing, Int. J. Mech. Sci., 219 Andrew, 2021, Energy absorption and self-sensing performance of 3D printed CF/PEEK cellular composites, Mater. Des., 208, 10.1016/j.matdes.2021.109863 Andrew, 2021, Impact behavior of nanoengineered, 3D printed plate-lattices, Mater. Des., 202, 10.1016/j.matdes.2021.109516 Andrew, 2021, Energy absorption characteristics of additively manufactured plate-lattices under low- velocity impact loading, Int. J. Impact Eng., 149, 10.1016/j.ijimpeng.2020.103768 Msallem, 2020, Evaluation of the dimensional accuracy of 3D-printed anatomical mandibular models using FFF, SLA, SLS, MJ, and BJ Printing Technology, J. Clin. Med., 9, 817, 10.3390/jcm9030817 Li, 2006, Compressive strain at the onset of densification of cellular solids, J. Cell Plast., 42, 371, 10.1177/0021955X06063519 Avalle, 2001, Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagram, Int. J. Impact Eng., 25, 455, 10.1016/S0734-743X(00)00060-9 W., 2021, A friction interface model for multi-material interactions in a Eulerian framework, J. Comput. Phys., 433 Li, 2020, A novel construction method of computational domains on large-scale near-ground explosion problems, J. Comput. Phys., 407, 10.1016/j.jcp.2019.109226 C., 2015, Parallel adaptive mesh refinement method based on WENO finite difference scheme for the simulation of multi-dimensional detonation, J. Comput. Phys., 298, 161, 10.1016/j.jcp.2015.06.001 Shi, 2021, Numerical simulation of hydraulic fracture propagation in conglomerate reservoirs, Eng. Fract. Mech., 248, 10.1016/j.engfracmech.2021.107738 Lin, 2021, Cohesive fracture model of rocks based on multi-scale model and Lennard-Jones potential, Eng. Fract. Mech., 246, 10.1016/j.engfracmech.2021.107627 Feng, 2021, A new fractional Nishihara-type model with creep damage considering thermal effect, Eng. Fract. Mech., 242, 10.1016/j.engfracmech.2020.107451 Bursi, 1997, Calibration of a finite element model for isolated bolted end-plate steel connections, J. Constr. Steel. Res., 44, 225, 10.1016/S0143-974X(97)00056-4 Flanagan, 1981, A uniform strain hexahedron and quadrilateral with orthogonal hourglass control, Internat. J. Numer. Methods Engrg., 17, 679, 10.1002/nme.1620170504 Ling, 2019, Mechanical behaviour of additively-manufactured polymeric octet-truss lattice structures under quasi-static and dynamic compressive loading, Mater. Des., 162, 106, 10.1016/j.matdes.2018.11.035 Li, 2015, A comparative study on thin-walled structures with functionally graded thickness (FGT) and tapered tubes withstanding oblique impact loading, Int. J. Impact Eng., 77, 68, 10.1016/j.ijimpeng.2014.11.003 V. Gattineni, V. Nathi, Expansion based composite tubes as energy absorbers for improved specific energy absorption: FEA based study, in: 2nd ICMMSE, SI ed., Hyderabad, India, 2020, pp. 811–818. Chen, 2020, Light-weight shell-lattice metamaterials for mechanical shock absorption, Int. J. Mech. Sci., 169, 10.1016/j.ijmecsci.2019.105288