A conventional theory of mechanism-based strain gradient plasticity
Tóm tắt
Từ khóa
Tài liệu tham khảo
Acharya, 2000, Lattice incompatibility and a gradient theory of crystal plasticity, Journal of the Mechanics and Physics of Solids, 48, 1565, 10.1016/S0022-5096(99)00075-7
Acharya, 2000, Grain-size effect in viscoplastic polycrystals at moderate strains, Journal of the Mechanics and Physics of Solids, 48, 2213, 10.1016/S0022-5096(00)00013-2
Aifantis, 1984, On the microstructural origin of certain inelastic models, Journal of Engineering Materials and Technology—Transactions of the ASME, 106, 326, 10.1115/1.3225725
Aifantis, 1992, On the role of gradients in the localization of deformation and fracture, International Journal of Engineering and Science, 30, 1279, 10.1016/0020-7225(92)90141-3
Arsenlis, 1999, Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density, Acta Materialia, 47, 1597, 10.1016/S1359-6454(99)00020-8
Asaro, 1985, Texture development and strain hardening in rate dependent polycrystals, Acta Metallurgica et Materialia, 33, 923, 10.1016/0001-6160(85)90188-9
Ashby, 1970, The deformation of plastically non-homogeneous alloys, Philosophical Magazine, 21, 399, 10.1080/14786437008238426
Atkinson, 1995, Further analysis of the size effect in indentation hardness tests of some metals, Journal of Materials Research, 10, 2908, 10.1557/JMR.1995.2908
Bailey, 1960, The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver, Philosophical Magazine, 5, 485, 10.1080/14786436008238300
Bassani, 2001, Incompatibility and a simple gradient theory of plasticity, Journal of the Mechanics and Physics of Solids, 49, 1983, 10.1016/S0022-5096(01)00037-0
Beaudoin, 2001, A model for rate-dependent flow of metal polycrystals based on the slip plane lattice incompatibility, Materials Science and Engineering A, 309, 411, 10.1016/S0921-5093(00)01620-8
Bilby, 1955, Continuous distributions of dislocation, Proceedings of the Royal Society of London A, 231, 263, 10.1098/rspa.1955.0171
Bishop, 1951, A theory of plastic distortion of a polycrystalline aggregate under combined stresses, Philosophical Magazine, 42, 414, 10.1080/14786445108561065
Bishop, 1951, A theoretical derivation of the plastic properties of a polycrystalline face-centered metal, Philosophical Magazine, 42, 1298, 10.1080/14786444108561385
Canova, 1984, The development of deformation textures and resulting properties of fcc metals, 573
Cermelli, 2001, On the characterization of geometrically necessary dislocations in finite plasticity, Journal of the Mechanics and Physics of Solids, 49, 1539, 10.1016/S0022-5096(00)00084-3
Chen, 2000, A new hardening law for strain gradient plasticity, Acta Materialia, 48, 3997, 10.1016/S1359-6454(00)00216-0
Chen, 2002, A new deformation theory with strain gradient effects, International Journal of Plasticity, 18, 971, 10.1016/S0749-6419(01)00020-1
Cleveringa, 1997, Comparison of discrete dislocation and continuum plasticity predictions for a composite material, Acta Materialia, 45, 3163, 10.1016/S1359-6454(97)00011-6
Cleveringa, 1998, Discrete dislocation simulations and size dependent hardening in single slip, Journal de Physique IV, 8, 83
Cleveringa, 1999, A discrete dislocation analysis of bending, International Journal of Plasticity, 15, 837, 10.1016/S0749-6419(99)00013-3
Cleveringa, 1999, A discrete dislocation analysis of residual stresses in a composite material, Philosophical Magazine A, 79, 893, 10.1080/01418619908210338
Cottrell, 1964
Dai, H., Parks, D.M., 2003. Geometrically-necessary Dislocation Density in Continuum Crystal Plasticity Theory and FEM Implementation (unpublished manuscript).
de Borst, 1992, Gradient-dependent plasticity, International Journal for Numerical Methods in Engineering, 35, 521, 10.1002/nme.1620350307
De Guzman, 1993, The role of indentation depth on the measured hardness of materials, Materials Research Symposium Proceedings, 308, 613, 10.1557/PROC-308-613
Douglass, M.R., 1998. Lifetime estimates and unique failure mechanisms of the digital micromirror device (DMD). In: Annual Proceedings–Reliability Physics Symposium (Sponsored by IEEE), 31 March–2 April 1998, pp. 9–16. Available from <http://www.dlp.com/dlp/resources/whitepapers/pdf/ieeeir.pdf>.
Elssner, 1994, The influence of interface impurities on fracture energy of UHV diffusion-bonded metal-ceramic bicrystals, Scripta Metallurgica et Materialia, 31, 1037, 10.1016/0956-716X(94)90523-1
Evers, 2002, Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation, Journal of the Mechanics and Physics of Solids, 50, 2403, 10.1016/S0022-5096(02)00032-7
Fleck, 1993, A phenomenological theory for strain gradient effects in plasticity, Journal of the Mechanics and Physics of Solids, 41, 1825, 10.1016/0022-5096(93)90072-N
Fleck, 2001, A reformulation of strain gradient plasticity, Journal of the Mechanics and Physics of Solids, 49, 2245, 10.1016/S0022-5096(01)00049-7
Fleck, 1994, Strain gradient plasticity, Acta Metallurgica et Materialia, 42, 475, 10.1016/0956-7151(94)90502-9
Fox, 1966, A continuum theory of dislocations for single crystals, Journal of Institute for Mathematics and its Applications, 2, 285, 10.1093/imamat/2.4.285
Gao, 1999, Modeling plasticity at the micrometer scale, Naturwissenschaften, 86, 507, 10.1007/s001140050665
Gao, 1999, Mechanism-based strain gradient plasticity- I. Theory, Journal of the Mechanics and Physics of Solids, 47, 1239, 10.1016/S0022-5096(98)00103-3
Gurtin, 2000, On the plasticity of single crystals, Journal of the Mechanics and Physics of Solids, 48, 989, 10.1016/S0022-5096(99)00059-9
Gurtin, 2002, A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations, Journal of the Mechanics and Physics of Solids, 50, 5, 10.1016/S0022-5096(01)00104-1
Haque, M.A., Saif, M.T.A. Strain gradient effect in nanoscale thin films. Acta Materialia, S1 (11), 3053–3061.
Huang, 2000, Mechanism-based strain gradient plasticity—II. Analysis, Journal of the Mechanics and Physics of Solids, 48, 99, 10.1016/S0022-5096(99)00022-8
Huang, 2000, A study of microindentation hardness tests by mechanism-based strain gradient plasticity, Journal of Materials Research, 15, 1786, 10.1557/JMR.2000.0258
Hutchinson, 1976, Bounds and self-consistent estimates for creep of polycrystalline materials, Proceedings of the Royal Society of London A, 348, 101, 10.1098/rspa.1976.0027
Hwang, 2002, A finite deformation theory of strain gradient plasticity, Journal of the Mechanics and Physics of Solids, 50, 81, 10.1016/S0022-5096(01)00020-5
Hwang, 2003, Finite deformation analysis of mechanism-based strain gradient plasticity, International Journal of Plasticity, 19, 235, 10.1016/S0749-6419(01)00039-0
Hwang, K.C., Yun, G., Huang, Y., 2003b. A reformulation of mechanism-based strain gradient (MSG) plasticity (submitted for publication).
Jiang, 2001, Fracture in mechanism-based strain gradient plasticity, Journal of the Mechanics and Physics of Solids, 49, 979, 10.1016/S0022-5096(00)00070-3
Kocks, 1970, The relation between polycrystal deformation and single crystal deformation, Metallurgical and Materials Transactions, 1, 1121, 10.1007/BF02900224
Kocks, 1985, Dislocation interactions: flow stress and strain hardening, 125
Kok, 2002, A polycrystal plasticity model based on the mechanical threshold, International Journal of Plasticity, 18, 715, 10.1016/S0749-6419(01)00051-1
Kok, 2002, On the development of stage IV hardening using a model based on the mechanical threshold, Acta Materialia, 50, 1653, 10.1016/S1359-6454(02)00002-2
Kok, 2002, A finite element model for the Portevin-Le Chatelier effect based on polycrystal plasticity, Modelling and Simulation in Materials Science and Engineering, 10, 745, 10.1088/0965-0393/10/6/309
Kondo, 1952, On the geometrical and physical foundations of the theory of yielding, Proceedings Japan National Congress of Applied Mechanics, 2, 41
Kondo, 1955, Non-Riemannian geometry of imperfect crystals from a macroscopic viewpoint
Kröner, 1960, Allgemeine kontinuumstheorie der Versetzungen und Eigenspannungen, Archive for Rational Mechanics and Analysis, 4, 273, 10.1007/BF00281393
Lasry, 1988, Localization limiters in transient problems, International Journal of Solids and Structures, 24, 581, 10.1016/0020-7683(88)90059-5
Lee, 1969, Elastic-plastic deformation at finite strains, Journal of Applied Mechanics, 36, 1, 10.1115/1.3564580
Liu, B, Qiu, X., Huang, Y., Hwang, K.C., Li, M., Liu, C., 2003. The size effect of void growth in ductile materials. Journal of the Mechanics and Physics of Solids (in press).
Lloyd, 1994, Particle reinforced aluminum and magnesium matrix composites, International Materials Reviews, 39, 1, 10.1179/imr.1994.39.1.1
Lücke, K., Mecking, H., 1973. Dynamic recovery. In: Reed-Hill, R.E. (Ed.), The Inhomogeneity of Plastic Deformation. American Society for Metals, p. 223.
Ma, 1995, Size dependent hardness of silver single crystals, Journal of Materials Research, 10, 853, 10.1557/JMR.1995.0853
Mariano, 2002, A note on Ceradini-Capurso-Maier's theorem in plasticity, International Journal of Plasticity, 18, 1749, 10.1016/S0749-6419(01)00031-6
McElhaney, 1998, Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments, Journal of Materials Research, 13, 1300, 10.1557/JMR.1998.0185
Mindlin, 1964, Micro-structure in linear elasticity, Archive Rational Mechanics Analysis, 16, 51, 10.1007/BF00248490
Mindlin, 1965, Second gradient of strain and surface tension in linear elasticity, International Journal of Solids and Structures, 1, 417, 10.1016/0020-7683(65)90006-5
Mühlaus, 1991, A variational principle for gradient plasticity, International Journal of Solids and Structures, 28, 845, 10.1016/0020-7683(91)90004-Y
Nabarro, 1964, The plasticity of pure single crystals, Advances in Physics, 13, 193, 10.1080/00018736400101031
Niordson, C.F., Hutchinson, J.W., 2003. On lower order strain gradient plasticity theories. European Journal of Mechanics. A/Solids (in press).
Nix, 1989, Mechanical properties of thin films, Materials Transactions, 20A, 2217
Nix, 1997, Elastic and plastic properties of thin films on substrates, Materials Science and Engineering A, 234, 37, 10.1016/S0921-5093(97)00176-7
Nix, 1998, Indentation size effects in crystalline materials, Journal of the Mechanics and Physics of Solids, 46, 411, 10.1016/S0022-5096(97)00086-0
Nye, 1953, F, Some geometrical relations in dislocated crystals, Acta Metallurgica et Materialia, 1, 153, 10.1016/0001-6160(53)90054-6
Pan, 1983, Rate sensitivity of plastic flow and implications for yield-surface vertices, International Journal of Solids and Structures, 19, 973, 10.1016/0020-7683(83)90023-9
Peirce, 1983, Material rate sensitivity and localized deformation in crystalline solids, Acta Metallurgica et Materialia, 31, 1951, 10.1016/0001-6160(83)90014-7
Poole, 1996, Micro-hardness of annealed and work-hardened copper polycrystals, Scripta Materialia, 34, 559, 10.1016/1359-6462(95)00524-2
Press, 1986
Qiu, 2001, Effect of intrinsic lattice resistance in strain gradient plasticity, Acta Materialia, 49, 3949, 10.1016/S1359-6454(01)00299-3
Qiu, 2003, The flow theory of mechanism-based strain gradient plasticity, Mechanics of Materials, 35, 245, 10.1016/S0167-6636(02)00274-0
Rice, 1969, On the ductile enlargement of voids in triaxial stress fields, Journal of the Mechanics and Physics of Solids, 17, 201, 10.1016/0022-5096(69)90033-7
Saha, 2001, Indentation of a soft metal film on a hard substrate, Journal of the Mechanics and Physics of Solids, 49, 1997, 10.1016/S0022-5096(01)00035-7
Shi, 2001, The boundary-layer effect on the crack tip field in mechanism-based strain gradient plasticity, International Journal of Fracture, 112, 23, 10.1023/A:1013548131004
Shizawa, 1999, A thermodynamical theory of gradient elastoplasticity with dislocation density tensor. I: Fundamentals, International Journal of Plasticity, 15, 899, 10.1016/S0749-6419(99)00018-2
Shu, 1999, Strain gradient crystal plasticity, Journal of the Mechanics and Physics of Solids, 47, 297, 10.1016/S0022-5096(98)00081-7
Sluys, 1993, Wave-propagation, localization and dispersion in a gradient-dependent medium, International Journal of Solids and Structures, 30, 1153, 10.1016/0020-7683(93)90010-5
Steinmann, 1996, Views on multiplicative elastoplasticity and the continuum theory of dislocations, International Journal of Engineering Science, 34, 1717, 10.1016/S0020-7225(96)00062-6
Stelmashenko, 1993, Microindentation on W and Mo oriented single crystals, Acta Metallurgica et Materialia, 41, 2855, 10.1016/0956-7151(93)90100-7
Stolken, 1998, A microbend test method for measuring the plasticity length scale, Acta Materialia, 46, 5109, 10.1016/S1359-6454(98)00153-0
Suresh, 1999, Nano-indentation of copper thin films on silicon substrates, Scripta Materialia, 41, 951, 10.1016/S1359-6462(99)00245-6
Swadener, 2002, The correlation of the indentation size effect measured with indenters of various shapes, Journal of the Mechanics and Physics of Solids, 50, 681, 10.1016/S0022-5096(01)00103-X
Taylor, 1934, The mechanism of plastic deformation of crystals. Part I.—theoretical, Proceedings of the Royal Society of London A, 145, 362, 10.1098/rspa.1934.0106
Taylor, 1938, Plastic strain in metals, Journal of the Institute of Metals, 62, 307
Tymiak, 2001, Plastic strain and strain gradients at very small indentation depths, Acta Materialia, 49, 1021, 10.1016/S1359-6454(00)00378-5
Wang, 2003, A study of microbend test by strain gradient plasticity, International Journal of Plasticity, 19, 365, 10.1016/S0749-6419(01)00066-3
Xue, 2002, Particle size effect in metallic materials, Acta Materialia, 50, 149, 10.1016/S1359-6454(01)00325-1
Xue, 2002, The strain gradient effect in microelectromechanical systems (MEMS), Journal of Microelectromechanical Systems, 11, 27, 10.1109/84.982860
Zbib, 1988, On the localization and postlocalization behavior of plastic deformation. Part I. On the initiation of shear bands; Part II. On the evolution and thickness of shear bands; Part III. On the structure and velocity of Portevin-Le Chatelier bands, Res Mechanica, 23, 261
Zhu, 1995, Flow strength and size effect of an Al-Si-Mg composite model system under multiaxial loading, Scripta Metallurgica et Materialia, 32, 1895, 10.1016/0956-716X(95)00033-R