A convenient look-up-table based method for the compensation of non-linear error in digital fringe projection

Gorthi, 2010, Fringe projection techniques: Whither we are?, Opt. Lasers Eng., 48, 133, 10.1016/j.optlaseng.2009.09.001 Kishimoto, 2012, Electron moire method, Theoret. Appl. Mech. Lett., 2, 011001, 10.1063/2.1201101 Yang, 2011, Vibration parameter measurement using the temporal digital hologram sequence and windowed Fourier transform, Theoret. Appl. Mech. Lett., 1, 051008, 10.1063/2.1105108 Sun, 2011, Videometric research on deformation measurement of large-scale wind turbine blades, Theoret. Appl. Mech. Lett., 1, 011005, 10.1063/2.1101105 Pan, 2009, Phase error analysis and compensation for nonsinusoidal waveforms in phase-shifting digital fringe projection profilometry, Opt. Lett., 34, 416, 10.1364/OL.34.000416 Song, 2005, Phase error compensation for a 3-D shape measurement system based on the phase-shifting method, Proc. of SPIE, 6000, 60000E-1 Hoang, 2010, Generic gamma correction for accuracy enhancement in fringe-projection profilometry, Opt. Lett., 35, 1992, 10.1364/OL.35.001992 Ma, 2011, Experimental investigation of interface curing stresses between PMMA and composite using digital speckle correlation method, Theoret. Appl. Mech. Lett., 1, 051003, 10.1063/2.1105103 Wang, 2014, Out-of-plane shape determination in generalized fringe projection profilometry, Opt. Express, 14, 12122, 10.1364/OE.14.012122 Fu, 2011, Fringe projection profilometry based on a novel phase shift method, Opt. Express, 19, 21739, 10.1364/OE.19.021739 Li, 2009, Complex object 3D measurement based on phase-shifting and a neural network, Opt. Commun., 282, 2699, 10.1016/j.optcom.2009.04.055 Wang, 2014, Gamma calibration and phase error compensation for phase shifting profilometry, Int. J. Multimed. Ubiquitous Eng., 9, 311, 10.14257/ijmue.2014.9.9.32 Liu, 2010, Gamma model and its analysis for phase measuring profilometry, Appl. Opt., 27, 553 Guo, 2004, Gamma correction for digital fringe projection profilometry, Appl. Opt., 43, 2096, 10.1364/AO.43.002906 Surrel, 1996, Design of algorithms for phase measurements by the use of phase stepping, Appl. Opt., 35, 51, 10.1364/AO.35.000051 Huang, 2002, Double three-step phase-shifting algorithm, Appl. Opt., 41, 4503, 10.1364/AO.41.004503 Gai, 2010, Fringe image analysis based on the amplitude modulation method, Opt. Express, 18, 10704, 10.1364/OE.18.010704 Zhang, 2007, Generic nonsinusoidal phase error correction for three-dimensional shape measurement using a digital video projector, Appl. Opt., 46, 36, 10.1364/AO.46.000036 Zhang, 2015, Full-field phase error detection and compensation method for digital phase-shifting fringe projection profilometry, Meas. Sci. Technol., 26, 035201, 10.1088/0957-0233/26/3/035201 Fu, 2014, A novel three-dimensional shape measurement method based on a look-up-table, Optik, 125, 1804, 10.1016/j.ijleo.2013.10.009 Huang, 2003, Error compensation for a three-dimensional shape measurement system, Opt. Eng., 42, 482, 10.1117/1.1531977 Schwider, 1999, Some considerations of reduction of reference phase error in phase-stepping interferometry, Appl. Opt., 38, 655, 10.1364/AO.38.000655 Zhou, 2014, Phase error analysis and compensation considering ambient light for phase measuring profilometry, Opt. Lasers Eng., 55, 99, 10.1016/j.optlaseng.2013.10.027 Lei, 2009, Flexible 3-D shape measurement using projector defocusing, Opt. Lett., 34, 3080, 10.1364/OL.34.003080