A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications

Ahlert, 1994

Andrews, 1981, An analysis of solid particle erosion mechanisms, J. Phys. D Appl. Phys., 14, 1979, 10.1088/0022-3727/14/11/006

Andrews, 1983, Particle collisions in the vicinity of an eroding surface, J. Phys. D Appl. Phys., 16, 525, 10.1088/0022-3727/16/4/014

Ansari, 1994, A comprehensive mechanistic model for upward two-phase flow in wellbores, SPE Prod. Facil., 20630, 143, 10.2118/20630-PA

API, 1981, 22

Atkinson, 2007, High pressure testing sand erosion in 3D flow channels and correlation with CFD, Wear, 263, 270, 10.1016/j.wear.2007.01.100

Babu, 2011, The influence of erodent hardness on the erosion behavior of detonation sprayed WC-12Co coatings, Wear, 270, 903, 10.1016/j.wear.2011.02.019

Bahoosh Kazerooni, 2010, V2f study of nano and micro-particles transportation in turbulent boundary layer in conjunction with Eddy Interaction Model

Barton, 2003

Bellman, 1981, Erosion mechanism in ductile metals, Wear, 70, 1, 10.1016/0043-1648(81)90268-4

Bikbiaev, 1972, Main factors affecting gas abrasive wear of elbows in pneumatic conveying pipes, Chem. Pet. Eng., 8, 465

Birchenough, 1995

Bitter, 1963, A study of erosion phenomena part I, Wear, 6, 5, 10.1016/0043-1648(63)90003-6

Bitter, 1963, A study of erosion phenomena: part II, Wear, 6, 169, 10.1016/0043-1648(63)90073-5

Bourgoyne, 1989, Experimental study of erosion in diverter systems due to sand production

Brach, 1988, Impact dynamics with applications to solid particle erosion, Int. J. Impact Eng., 7, 10.1016/0734-743X(88)90011-5

Brown, 1981, Erosion of α-Fe by spherical glass particles, Wear, 70, 347, 10.1016/0043-1648(81)90355-0

Burnett, 1994, Comparison between sand blast and centripetal effect accelerator type erosion testers, 168

Chase, 1992, A model for the effect of velocity on erosion of N80 steel tubing due to the normal impingement of solid particle, J. Energy Resour. Technol., 114, 54, 10.1115/1.2905921

Chen, 2004

Chen, 1997, A model for erosion at normal impact, Wear, 205, 32, 10.1016/S0043-1648(96)07315-2

Chen, 1998, Computational mean particle erosion model, Wear, 214, 64, 10.1016/S0043-1648(97)00210-X

Chen, 2004, Application and experimental validation of a computational fluid dynamics (CFD)-based erosion prediction model in elbows and plugged tees, Comput. Fluids, 33, 1251, 10.1016/j.compfluid.2004.02.003

Chen, 2006, A comprehensive procedure to estimate erosion in elbows for gas/liquid/sand multiphase flow, ASME J. Energy Resour. Technol., 128, 70, 10.1115/1.2131885

Chen, 2006, Numerical and experimental investigation of the relative erosion severity between plugged tees and elbows in dilute gas/solid two-phase flow, Wear, 261, 715, 10.1016/j.wear.2006.01.022

Clark, 1991, on the impact rate and impact energy of particles in a slurry pot erosion tester, Wear, 146, 165, 10.1016/0043-1648(91)90127-G

Clark, 1992, The influence of the squeeze film on particle impact velocities in erosion, Int. J. Impact Eng., 12, 415, 10.1016/0734-743X(92)90156-N

Coffin, 1954, A study of the effect of cyclic thermal stresses on a ductile metals, Trans. ASME, 76, 931

Coker, 1990, Understand two-phase flow in process piping, Chem. Eng. Prog., 86, 60

Deffenbaugh, 1989

Deng, 2005, Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor, Wear, 258, 480, 10.1016/j.wear.2004.08.001

Det Norske Vertitas, 1996

Desale, 2009, Particle size effects on the slurry erosion of aluminum alloy (AA 6063), Wear, 266, 1066, 10.1016/j.wear.2009.01.002

Edwards, 1998

Edwards, 2001, Modeling solid particle erosion in elbows and plugged tees, J. Energy Resour. Technol., 123, 277, 10.1115/1.1413773

Elkholy, 1983, Prediction of abrasion wear for slurry pump materials, Wear, 84, 39, 10.1016/0043-1648(83)90117-5

Evans, 1978, Impact damage in brittle materials in the elastic-plastic response regime, Proc. R. Soc. Lond. Ser. A (Math. Phys. Sci.), 361, 343, 10.1098/rspa.1978.0106

Eyler, 1987

Fan, 2001, Experimental and numerical investigation of a new method for protecting bends from erosion in gas-particle flows, Wear, 251, 853, 10.1016/S0043-1648(01)00742-6

Fan, 2002, Anti-erosion in a 90 degrees bend by particle impaction, AIChE J., 48, 1401, 10.1002/aic.690480705

Fan, 2004, Large eddy simulation of the anti-erosion characteristics of the ribbed-bend in gas–solid flows, J. Eng. Gas Turbines Power, 126, 672, 10.1115/1.1760523

Ferng, 2008, Predicting local distributions of erosion–corrosion wear sites for the piping in the nuclear power plant using CFD models, Ann. Nucl. Energy, 35, 304, 10.1016/j.anucene.2007.06.010

Finnie, 1958, 527

Finnie, 1960, Erosion of surfaces by solid particles, Wear, 3, 87, 10.1016/0043-1648(60)90055-7

Finnie, 1972, Some observations on the erosion of ductile metals, Wear, 19, 81, 10.1016/0043-1648(72)90444-9

Finnie, 1967, Erosion of metal by solid particles, J. Mater., 2, 682

Foley, 1983, The erosion of heat treated steels, Wear, 91, 45, 10.1016/0043-1648(83)90107-2

Forder, 1998, A numerical investigation of solid particle erosion experienced within oilfield control valves, Wear, 216, 184, 10.1016/S0043-1648(97)00217-2

Fore, 1994, The distribution of drop size and velocity in gas-liquid annular flow, Int. J. Multiph. Flow, 21, 137, 10.1016/0301-9322(94)00061-N

Gandhi, 2002, Effect of particle size and size distribution on estimating erosion wear of cast iron in sand-water slurries, Indian J. Eng. Mater. Sci., 9, 480

Gandhi, 2012, CFD based prediction of erosion rate in large scale wall-fired boiler, Appl. Therm. Eng., 42, 90, 10.1016/j.applthermaleng.2012.03.015

Gipson, 1989

Gomez, 2000, Prediction of slug-liquid holdup horizontal to upward vertical flow, Int. J. Multiph. Flow, 263, 517, 10.1016/S0301-9322(99)00025-7

Gosman, 1983, Aspects of computer simulation of liquid-fuelled combustors, J. Energy, 7, 482

Grant, 1975, Erosion prediction in turbomachinery resulting from environmental solid particles, J. Aircr., 12, 471, 10.2514/3.59826

Gundameedi, 2008

Habib, 2004, Numerical calculations of erosion in an abrupt pipe contraction of different contraction ratios, Int. J. Numer. Methods Fluids, 46, 19, 10.1002/fld.744

Habib, 2007, Erosion rate correlations of a pipe protruded in an abrupt pipe contraction, Int. J. Impact Eng., 34, 1350, 10.1016/j.ijimpeng.2006.07.007

Habib, 2008, Erosion and penetration rates of a pipe protruded in a sudden contraction, Comput. Fluids, 37, 146, 10.1016/j.compfluid.2007.05.002

Haugen, 1995, Sand erosion of wear-resistant materials: erosion in choke valves, Wear, 186–187, 179, 10.1016/0043-1648(95)07158-X

Heidersbach, 1985, Velocity limits for erosion-corrosion

Hinze, 1972, Turbulent fluid and particle interaction, Prog. Heat Mass Transf., 6, 433

Huang, 2008, A comprehensive phenomenological model for erosion of materials in jet flow, Powder Technol., 187, 273, 10.1016/j.powtec.2008.03.003

Humphrey, 1990, Fundamental of fluid motion in erosion by solid particle impact, Int. J. Heat Fluid Flow, 11, 170, 10.1016/0142-727X(90)90036-B

Hutchings, 1980, Some comments on the theoretical treatment of erosive particle impacts, 36

Hutchings, 1981, A model for the erosion of metals by spherical particles at normal incidence, Wear, 70, 269, 10.1016/0043-1648(81)90347-1

Hutchings, 1976, Solid particle erosion of metals: the removal of surface material by spherical projectiles, Proc. R. Soc. Lond. Ser. A Math. Phys. Sci., 348, 370, 10.1098/rspa.1976.0044

Ishi, 1989, Droplet entrainment correlation in annular two-phase flow, Int. J. Heat Mass Transf., 32, 1835, 10.1016/0017-9310(89)90155-5

Jahanmir, 1980, The mechanics of subsurface damage in solid particle erosion, Wear, 61, 309, 10.1016/0043-1648(80)90294-X

Jennings, 1976, A mechanistic model for the prediction of ductile erosion, Wear, 40, 93, 10.1016/0043-1648(76)90021-1

Johansson, 1987, Solid particle erosion — a statistical method for evaluation of strength properties of semiconducting materials, Wear, 115, 107, 10.1016/0043-1648(87)90202-X

Johnson, 1985, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Eng. Fract. Mech., 21, 31, 10.1016/0013-7944(85)90052-9

Jordan, 1998

Kesana, 2013, Experimental investigation of slug characteristics through a standard pipe bend

Kesana, 2013, Experimental study of slug characteristics: implications to sand erosion

Kesana, 2013, Ultrasonic measurement of multiphase flow erosion patterns in a standard elbow, ASME J. Energy Resour. Technol., 135, 032905, 10.1115/1.4023331

Kesana, 2013, Effect of particle size and liquid viscosity on erosion in annular and slug flow, J. Energy Resour. Technol., 10.1115/1.4024857

Kesana, 2014, A mechanistic model for predicting erosion in pseudo slug flow

Kesana, 2014, Experimental study of sand particle concentration profiles in straight and pipe elbow for horizontal multiphase flows, J. Energy Resour. Technol., 10.1115/1.4026603

Kleis, 2008

Klose, 2001, Comparison of state-of-the-art droplet turbulence interaction models for jet engine combustor conditions, Int. J. Heat Fluid Flow, 22, 343, 10.1016/S0142-727X(01)00097-2

Kokal, 1989, An experimental study of two-phase flows in slightly inclined pipes-Ι. Flow patterns, Chem. Eng. Sci., 44, 665, 10.1016/0009-2509(89)85042-0

Kvernvold, 1993

Laitone, 1979, Aerodynamic effect in the erosion process, Wear, 56, 239, 10.1016/0043-1648(79)90022-X

Laitone, 1979, Erosion prediction near the stagnation point resulting from aerodynamically entrained solid particles, J. Aircr., 16, 809, 10.2514/3.58608

Lee, 2002, On numerical modeling of particle–wall impaction in relation to erosion prediction: Eulerian versus Lagrangian method, Wear, 252, 179, 10.1016/S0043-1648(01)00838-9

Levin, 1999, Modeling solid-particle erosion of ductile alloys, Metall. Mater. Trans. A, 30A, 1763, 10.1007/s11661-999-0175-9

Levy, 1979, The role of plasticity in erosion

Levy, 1995

Levy, 1983, The effect of erodent composition and shape on the erosion of steel, Wear, 89, 151, 10.1016/0043-1648(83)90240-5

Levy, 1982, Surface degradation of metals in simulated synthetic fuels plant environments, 154

Li, 2009, Numerical simulation of predicting and reducing solid particle erosion of solid–liquid two-phase flow in a choke, Pet. Sci., 6, 91, 10.1007/s12182-009-0017-9

Liebhard, 1991, The effect of erodent particle characteristics on the erosion of metals, Wear, 151, 151, 10.1016/0043-1648(91)90263-T

Lu, 2013, A computational-fluid-dynamics-based Eulerian-granular approach for characterization of sand erosion in multiphase-flow systems, SPE J., 19, 586, 10.2118/159921-PA

Lu, 1992, Particle motion in two-dimensional confined turbulent flows, Aerosol Sci. Technol., 17, 169, 10.1080/02786829208959569

Lynn, 1991, On the particle size effect in slurry erosion, Wear, 149, 55, 10.1016/0043-1648(91)90364-Z

Mamoun, 1975

Manson, 1953

Marchiolo, 2002, Mechanisms for particle transfer and segregation in a turbulent boundary layer, J. Fluid Mech., 468, 283, 10.1017/S0022112002001738

Mazumder, 2004

Mazumder, 2007, Prediction of erosion due to solid particle impact in single-phase and multiphase flows, J. Press. Vessel Technol., 129, 576, 10.1115/1.2767336

Mazumder, 2003

Mazumder, 2004

Mazumder, 2005, Development and validation of a mechanistic model to predict solid particle erosion in multiphase flow, Wear, 259, 203, 10.1016/j.wear.2005.02.109

Mazur, 2004, Numerical 3D simulation of the erosion due to solid particle impact in the main stop valve of a steam turbine, Appl. Therm. Eng., 24, 1877, 10.1016/j.applthermaleng.2004.01.001

McLaury, 1993

McLaury, 1996

McLaury, 2000, An alternative method to API RP 14E for predicting solids erosion in multiphase flow, ASME J. Energy Resour. Technol., 122, 115, 10.1115/1.1288209

McLaury, 1999

McLaury, 2006

McLaury, 2010

McLaury, 2011, Distribution of sand particles in horizontal and vertical annular multiphase flow in pipes and the effects on sand erosion, J. Energy Resour. Technol., 10.1115/1.4004264

Mehrotra, 1998, Numerical simulation of turbulent particle dispersion using a Monte Carlo approach

Meng, 1995, Wear models and predictive equations: their form and content, Wear, 181–183, 443, 10.1016/0043-1648(95)90158-2

Meyer, 1908, Contribution to the knowledge of hardness and hardness testing, Z. Ver. Dtsch. Ing., 52, 645

Milojevic, 1990, Lagrangian Stochastic-Deterministic (LAD) prediction of particle dispersion in turbulence, Syst. Charact., 7, 181, 10.1002/ppsc.19900070132

Najafifard, 2014

Neilson, 1968, Erosion by a stream of solid particles, Wear, 11, 111, 10.1016/0043-1648(68)90591-7

Njobuenwu, 2012, Modelling of pipe bend erosion by dilute particle suspensions, Comput. Chem. Eng., 42, 235, 10.1016/j.compchemeng.2012.02.006

Njobuenwu, 2012, Prediction of turbulent gas–solid flow in a duct with a 90° bend using an Eulerian–Lagrangian approach, AIChE J., 58, 14, 10.1002/aic.12572

Nsoesie, 2014, Analytical modeling of solid-particle erosion of Stellite alloys in combination with experimental investigation, Wear, 309, 26

Oka, 2005, Practical estimation of erosion damage caused by solid particle impact: part 1: effects of impact parameters on a predictive equation, Wear, 259, 95, 10.1016/j.wear.2005.01.039

Oka, 2005, Practical estimation of erosion damage caused by solid particle impact: part 2: mechanical properties of materials directly associated with erosion damage, Wear, 259, 102, 10.1016/j.wear.2005.01.040

Parsi, 2014

Parsi, 2010, Numerical study of particle inertia effect using 3-Eddy Interaction Model

Parsi, 2010, Numerical study of turbulence anisotropy effect on particle deposition rate using DNS data

Parsi, 2012, Surveying aerosol deposition in a turbulent duct flow

Parsi, 2013

Parsi, 2014

Patton, 1993

Paz, 1994

Pereira, 2014, Numerical prediction of the erosion due to particles in elbows, Powder Technol., 261, 105, 10.1016/j.powtec.2014.04.033

Phillips, 1980, A force balance model for particle entrainment into a fluid stream, J. Phys. D Appl. Phys., 13, 221, 10.1088/0022-3727/13/2/019

Rabinowicz, 1979

Rodriguez, 2008

Salama, 1998

Salama, 2000, An alternative to API 14E erosional velocity limits for sand-laden fluids, J. Energy Resour. Technol., 122, 71, 10.1115/1.483167

Salama, 1983

Salik, 1981, The effect of mechanical surface and heat treatments on erosion resistance of 6061 aluminum alloy, Wear, 65, 351, 10.1016/0043-1648(81)90061-2

Santos, 2002

Sekoguchi, 1997, New development of experimental study on interfacial structure in gas–liquid two-phase flow, vol. 2, 177

Sheldon, 1970, Similarities and differences in the erosion behavior of materials, J. Basic Eng. Trans. ASME, 619, 10.1115/1.3425086

Sheldon, 1972, An investigation of impingement erosion using single particles, Wear, 21, 195, 10.1016/0043-1648(72)90257-8

Shipway, 1994, A method of optimizing the particle flux in erosion testing with a gas blast apparatus, Wear, 174, 169, 10.1016/0043-1648(94)90099-X

Shipway, 1996, The role of particle properties in the erosion of brittle materials, Wear, 193, 105, 10.1016/0043-1648(95)06694-2

Shirazi, 1995, A procedure to predict particle erosion in elbows and tees, J. Press. Technol., 117, 45, 10.1115/1.2842089

Smart, 1990

Smart, 1991

Smeltzer, 1970, Mechanisms of metal removal by impacting dust particles, J. Basic Eng. Trans. ASME, 639, 10.1115/1.3425091

Song, 2013, Performance comparison and erosion prediction of jet pumps by using a numerical method, Math. Comput. Model., 57, 245, 10.1016/j.mcm.2011.06.040

Sooraj, 2013, Elastic impact of abrasives for controlled erosion in fine finishing of surfaces, ASME J. Manuf. Sci. Eng., 135

Srinivasan, 1988, Effect of erodent hardness on erosion of brittle materials, Wear, 128, 139, 10.1016/0043-1648(88)90180-9

Sundararajan, 1991, A comprehensive model for the solid particle erosion of ductile materials, Wear, 149, 111, 10.1016/0043-1648(91)90368-5

Sundrarajan, 1983, A new model for the erosion of metals at normal incidence, Wear, 84, 237, 10.1016/0043-1648(83)90266-1

Svedeman, 1993

Svedeman, 1994, Criteria for sizing multi-phase flow lines for erosive/corrosive services, SPE Prod. Facil., 9, 74, 10.2118/26569-PA

Tabakoff, 1979, Erosion study of different materials affected by coal ash particles, Wear, 52, 161, 10.1016/0043-1648(79)90206-0

Tabor, 1951

Taitel, 1990

Throneberry, 2010

Tilly, 1973, A two stage mechanism of ductile erosion, Wear, 23, 87, 10.1016/0043-1648(73)90044-6

Timothy, 1999

Timothy, 2002, Laser Doppler velocimeter measurements to characterize turbulence in a constriction with sharp and rounded inlets, Exp. Fluids, 32, 472, 10.1007/s00348-001-0387-2

Tolle, 1977

Venougopal Reddy, 1986, Erosion behaviour of ductile materials with a spherical non-friable erodent, Wear, 111, 313, 10.1016/0043-1648(86)90190-0

Vieira, 2014

Vieira, 2014, Experimental investigation of horizontal gas-liquid stratified and annular flow using wire-mesh sensor, ASME J. Fluids Eng., 136, 10.1115/1.4027799

Vieira, 2014, Experimental study of vertical gas-liquid pipe flow for annular and liquid loading conditions using dual wire-mesh sensors

Wada, 1987, Solid particle erosion of brittle materials (Part 3), the interaction with material properties of target and that of impingement on erosive wear mechanism, Yogyo-Kyyokai-Shi, 95, 573, 10.2109/jcersj1950.95.1102_573

Wang, 2003, A CFD based correlation for erosion factor for long-radius elbows and bends, J. Energy Resour. Technol., 125, 26, 10.1115/1.1514674

Wang, 1996, Application of flow modeling and particle tracking to predict sand erosion rates in elbows, ASME Fluids Eng. Div., 236, 725

Weiner, 1976

Zhang, 2003, Unified model for gas-liquid pipe flow via slug dynamics – part 1: model development, J. Energy Resour. Technol., 125, 266, 10.1115/1.1615246

Zhang, 2003, Unified model for gas-liquid pipe flow via slug dynamics – part 2: model validation, J. Energy Resour. Technol., 125, 274, 10.1115/1.1615618

Zhang, 2007, “Comparison of computed and measured particle velocities and erosion in water and air flows”, Wear, 263, 330, 10.1016/j.wear.2006.12.048

Zhang, 2010

Zhang, 2011