A comprehensive review of miniatured wind energy harvesters

Federspiel, 2003, Air-powered sensor, Proc. IEEE Sensors, 1 Holmes, 2005, Axial flux permanent magnet machines for micropower generation, J. MEMS Rancourt, 2007 Myers, 2007, Small scale windmill Appl, Phys. Lett., 90 Perez, 2016, A cm scale electret-based electrostatic wind turbine for low-speed energy harvesting applications Smart Mater, Struct, 25 Gasch, 2002 Slootweg, 2003, Representing wind turbine electrical generating systems in fundamental frequency simulations, IEEE Trans. Energy Convers., 18, 516, 10.1109/TEC.2003.816593 Borowy, 1997, Dynamic response of a stand-alone wind energy conversion system with battery energy storage to a wind gust, IEEE Trans. Energy Convers., 12, 73, 10.1109/60.577283 Salameh, 1986, Interfacing a fixed-pitch-angle wind turbine with a double-output induction generator, Energy, 11, 941, 10.1016/0360-5442(86)90024-1 Xu, 2010, Design of a miniature wind turbine for powering wireless sensors Proc, SPIE.Int. Soc. Opt. Eng., 7647, 764741 Facchinetti, 2004, Coupling of structure and wake oscillators in vortex-induced vibrations, J. Fluid Struct., 19, 123, 10.1016/j.jfluidstructs.2003.12.004 Hartlen, 1970, Lift-oscillator model of vortex-induced vibration, J. Eng. Mech. Div.EM5, 577, 10.1061/JMCEA3.0001276 Weinstein, 2012, Vortex shedding induced energy harvesting from piezoelectric materials in heating, ventilation and air conditioning flows, Smart Mater. Struct., 21, 10.1088/0964-1726/21/4/045003 Wen, 2015, A novel micro fluid kinetic energy harvester based on the vortex-induced vibration principle and the piezo effect, Chemnitz: Universitätsverlag Chemnitz Theodorsen, 1935 Argentina, 2005, Fluid-flow-induced flutter of a flag, Proc. Natl. Acad. Sci. U. S. A, 102, 1829, 10.1073/pnas.0408383102 Hariri, 2009, Modelling piezoelectric actuation during structural flutter, vol. 1, 33 Jun, 2000, Flexible filaments in a flowing soap film as a model for one-dimensional flags in a two-dimensional wind, Nature, 408, 835, 10.1038/35048530 Yamaguchi, 2000, Flutter limits and behaviors of a flexible thin sheet in high-speed flow-I: analytical method for prediction of the sheet behavior, ASME. J. Fluid Eng., 122, 65, 10.1115/1.483242 Barrerogil, 2010, Energy harvesting from transverse galloping, J. Sound Vib., 329, 2873, 10.1016/j.jsv.2010.01.028 Howey, 2011, Design and performance of a centimetre-scale shrouded wind turbine for energy harvesting, Smart Mater. Struct., 20, 10.1088/0964-1726/20/8/085021 Fang, 2019, An efficient electromagnetic wind energy harvester for self-powered wireless sensor node, PowerMEMS Wu, 2014, An electromagnetic energy harvesting device based on high efficiency windmill structure for wireless forest fire monitoring application, Sensors & Actuators A Physical, 219, 73, 10.1016/j.sna.2014.09.002 Kan, 2016, Study on a piezo-windmill for energy harvesting, Renew. Energy, 97, 210, 10.1016/j.renene.2016.05.055 Zhang, 2017, A rotational piezoelectric energy harvester for efficient wind energy harvesting, Sensor Actuator Phys., 123 Wang, 2018, High-performance piezoelectric wind energy harvester with Y-shaped attachments, Energy Convers. Manag., 181, 645, 10.1016/j.enconman.2018.12.034 Jia, 2020, An asymmetric bending-torsional piezoelectric energy harvester at low wind speed, Energy, 198, 117287.1, 10.1016/j.energy.2020.117287 Sun, 2019, Analysis of a two-degree-of-freedom piezoelectric energy harvester from vortex-induced vibrations, Int. Conf.Adv. Intell.Mechatron Zhou, 2019, Vortex-induced vibrational tristable energy harvester: design and experiments, IOP Conf. Ser. Mater. Sci. Eng., 531, 10.1088/1757-899X/531/1/012011 Lee, 2019, Vortex-induced vibration wind energy harvesting by piezoelectric MEMS device in formation, Sci. Rep., 9, 20404, 10.1038/s41598-019-56786-0 Shi, 2020, Piezoelectric wind velocity sensor based on the variation of galloping frequency with drag force, Appl. Phys. Lett., 116, 264101, 10.1063/5.0012244 Lai, 2019, Harvest wind energy from a vibro-impact DEG embedded into a bluff body, Energy Convers. Manag., 199, 111993.1 Zhao, 2020, Piezoelectric galloping energy harvesting enhanced by topological equivalent aerodynamic design, Energy Convers. Manag., 222, 113260, 10.1016/j.enconman.2020.113260 Liu, 2020, Performance enhancement of wind energy harvester utilizing wake flow induced by double upstream flat-plates, Appl. Energy, 257, 114034, 10.1016/j.apenergy.2019.114034 Liu, 2019, Fork-shaped bluff body for enhancing the performance of galloping-based wind energy harvester, Energy, 92, 10.1016/j.energy.2019.06.044 Lanbin Zhang, et al. "Galloping triboelectric nanogenerator for energy harvesting under low wind speed." Nano Energy 70. Aquino, 2017, Evaluation of the integration of the wind-induced flutter energy harvester (WIFEH) into the built environment: experimental and numerical analysis, Applied Energy, 61, 10.1016/j.apenergy.2017.06.041 Phan, 2017, Aerodynamic and aeroelastic flutters driven triboelectric nanogenerators for harvesting broadband airflow energy, Nano Energy, 10.1016/j.nanoen.2017.02.005 Orrego, 2017, Harvesting ambient wind energy with an inverted piezoelectric flag, Appl. Energy, 212, 10.1016/j.apenergy.2017.03.016 Wang, 2015, Elasto-aerodynamics-driven triboelectric nanogenerator for scavenging air-flow energy, ACS Nano, 10.1021/acsnano.5b04396 Ravichandran, 2019, Compact and high performance wind actuated venturi triboelectric energy harvester, Nano Energy, 62, 10.1016/j.nanoen.2019.05.053 Sun, 2020, Wind energy harvesting based on fluttering double-flag type triboelectric nanogenerators, Nano Energy, 70, 104526, 10.1016/j.nanoen.2020.104526 Kwon, 2017, Wind-powered triboelectric energy harvester using curved flapping film array[C]//2017 19th International Conference on Solid-State Sensors Sun, 2019, Development of a novel vibro-wind galloping energy harvester with high power density incorporated with a nested bluff-body structure, Energy Convers. Manag., 197, 111880.1 Rezaei-Hosseinabadi, 2016, A topology and design optimization method for wideband piezoelectric wind energy harvesters, IEEE Trans. Ind. Electron., 63, 2165 Wang, 2020, Enhancement of low-speed piezoelectric wind energy harvesting by bluff body shapes: spindle-like and butterfly-like cross-sections, Aero. Sci. Technol., 105898, 10.1016/j.ast.2020.105898 Shan, 2019, A curved panel energy harvester for aeroelastic vibration, Appl. Energy, 249, 58, 10.1016/j.apenergy.2019.04.153 Zhou, 2018, Scavenging wind energy by a Y-shaped bi-stable energy harvester with curved wings, Energy, 153, 400, 10.1016/j.energy.2018.04.035 L D, A L Y, A Z Y, et al. Performance improvement of aeroelastic energy harvesters with two symmetrical fin-shaped rods. J. Wind Eng. Ind. Aerod., 196. Rezaei, 2019, Wideband PZT energy harvesting from the wake of a bluff body in varying flow speeds, Int. J. Mech. Sci., 163, 105135, 10.1016/j.ijmecsci.2019.105135 Wang, 2020, A synergetic hybrid mechanism of piezoelectric and triboelectric for galloping wind energy harvesting, Appl. Phys. Lett., 117, 10.1063/5.0014484 Zhou, 2019, Scavenging wind energy by a dynamic-stable flutter energy harvester with rectangular wing, Appl. Phys. Lett., 114, 10.1063/1.5100598 Tan, 2020, Piezoelectromagnetic synergy design and performance analysis for wind galloping energy harvester, Sensors and Actuators A-physical, 10.1016/j.sna.2019.111813 Qin, 2019, Harvesting wind energy with bi-stable snap-through excited by vortex-induced vibration and galloping, Energy, 10.1016/j.energy.2019.116237 Guo, 2019, Harvesting wind energy: a hybridized design of pinwheel by coupling triboelectrification and electromagnetic induction effects, Nano Energy, 10.1016/j.nanoen.2019.03.094 Chen, 2016, JMEMS letters A hybrid flapping-blade wind energy harvester based on vortex shedding effect, J. Microelectromech. Syst., 25, 845, 10.1109/JMEMS.2016.2588529 Fan, 2020, Triboelectric-electromagnetic hybrid nanogenerator driven by wind for self-powered wireless transmission in Internet of Things and self-powered wind speed sensor, Nano Energy, 10.1016/j.nanoen.2019.104319 Z L, S W, L Z, et al. A hybrid piezo-dielectric wind energy harvester for high-performance vortex-induced vibration energy harvesting. Mech. Syst. Signal Process., 150. Iqbal, 2018, Hybrid vibration and wind energy harvesting using combined piezoelectric and electromagnetic conversion for bridge health monitoring applications, Energy Convers. Manag., 172, 611, 10.1016/j.enconman.2018.07.044 Wang, 2015, Hybridized electromagnetic–triboelectric nanogenerator for scavenging air-flow energy to sustainably power temperature sensors, ACS Nano, 9, 4553, 10.1021/acsnano.5b01187