A complete finite element model of a mandibular implant-retained overdenture with two implants: Comparison between rigid and resilient attachment configurations

Mericske-Stern, 1994, Peri-implant mucosal aspects of ITI implants supporting overdentures. A five-year longitudinal study, Clin Oral Implants Res, 5, 9, 10.1034/j.1600-0501.1994.050102.x

Jemt, 1996, A 5-year prospective multicenter follow-up report on overdentures supported by osseointegrated implants, Int J Oral Maxillofac Implants, 11, 291

Heckmann, 2001, Overdenture attachment selection and the loading of implant and denture-bearing area. Part 1. In vivo verification of stereolithographic model, Clin Oral Impl Res, 12, 617, 10.1034/j.1600-0501.2001.120610.x

Oetterli, 2001, A longitudinal study on mandibular implants supporting an overdenture: the influence of retention mechanism and anatomic-prosthetic variables on peri-implant parameters, Int J Prosthodont, 14, 536

Tokuhisa, 2003, ln vitro study of a mandibular implant overdenture retained with ball, magnet, or bar attachments: comparison of load transfer and denture stability, Int J Prosthodont, 16, 128

Gotfredsen, 2000, Implant-supported mandibular overdentures retained with ball or bar attachments: a randomized prospective 5-year study, Int J Prosthodont, 13, 125

Cune, 2005, Patient satisfaction and preference with magnet, bar-clip, and ball-socket retained mandibular implant overdentures: a cross-over clinical trial, Int J Prosthodont, 18, 99

Sadowsky, 2000, Effect of anchorage systems and extension base contact on load transfer with mandibular implant-retained overdentures, J Prosthet Dent, 84, 327, 10.1067/mpr.2000.109378

Meijer, 1992, Stress distribution around dental implants: influence of superstructure, length of implants, and height of mandible, J Prosthet Dent, 68, 96, 10.1016/0022-3913(92)90293-J

Meijer, 1994, Location of implants in the interforaminal region of the mandible and the consequences for the design of the superstructure, J Oral Rehabil, 21, 47, 10.1111/j.1365-2842.1994.tb01123.x

Menicucci, 1998, Mandibular implant-retained overdenture: a clinical trial of two anchorage systems, Int J Oral Maxillofac Implants, 13, 851

Brunski, 1988, Biomaterials and biomechanics in dental implant design, Int J Oral Maxillofac Implants, 3, 85

Kenny, 1998, Photoelastic stress patterns produced by implant-retained overdentures, J Prosthet Dent, 80, 559, 10.1016/S0022-3913(98)70032-0

Chun, 2005, Stress distributions in maxillary bone surrounding overdenture implants with different overdenture attachments, J Oral Rehabil, 32, 193, 10.1111/j.1365-2842.2004.01407.x

Walton, 1994, Problems with prostheses on implants: a retrospective study, J Prosthet Dent, 71, 283, 10.1016/0022-3913(94)90468-5

Dudic, 2002, Retention mechanisms and prosthetic complications of implant-supported mandibular overdentures: long-term results, Clin Oral Implants Res, 4, 212

Mericske-Stern, 1998, Three-dimensional force measurements with mandibular overdentures connected to implants by ball-shaped retentive anchors. A clinical study, Int J Oral Maxillofac Implants, 13, 36

Heckmann, 2001, Overdenture attachment selection and the loading of implant and denture-bearing area. Part 2. A methodical study using five types of attachments, Clin Oral Impl Res, 12, 640, 10.1034/j.1600-0501.2001.120613.x

Porter, 2002, Comparaison of load distribution for implant overdenture attachments, Int J Oral Maxillofac Implants, 17, 651

Menicucci, 1998, Mandibular implant-retained overdenture: finite element analysis of two anchorage systems, Int J Oral Maxillofac Implants, 13, 369

Zarb GA, Bolender CL, Carlsson GE. In: Boucher's prothodontic treatment for edentulous patient. 11th ed. St Louis: CV Mosby; 1997. p. 8–29.

Voigt, 1889, Über die Bezechnung zwischen den beidem Elastizitätskonstanten isotroper Körper, Wied Ann, 33, 573, 10.1002/andp.18892741206

Reuss, 1929, Berechnung der Fliessgrenze von Mischkristalen auf grund der Plastizitätsbedigung für Einkristalle, Z Angew Math Mech, 9, 49, 10.1002/zamm.19290090104

Brunski, 2000, Biomaterials and biomechanics of oral and maxillofacial implants: current status and future developments, Int J Oral Maxillofac Implants, 15, 15

Takayama, 2001, The dynamic behaviour of a lower complete denture during unilateral loads: analysis using the finite element method, J Oral Rehabil, 28, 1064, 10.1046/j.1365-2842.2001.00759.x

Throckmorton, 1985, Quantitative calculations of temporomandibular joint reaction forces-I. The importance of the magnitude of the jaw muscle forces, J Biomechanics, 18, 445, 10.1016/0021-9290(85)90279-9

Koolstra, 2003, Number crunching with the human masticatory system, J Dent Res, 82, 672, 10.1177/154405910308200903

Ogata, 1995, Centre and magnitude of the vertical forces in complete denture weares, J Oral Rehabil, 22, 113, 10.1111/j.1365-2842.1995.tb00244.x

Cruz, 2003, Three-dimensional finite element stress analysis of a cuneiform-geometry implant, Int J Oral Maxillofac Implants, 18, 675

Van Eidjen, 1990, Coactivation of jaw muscles: recruitment order and level as a function of bite force direction and magnitude, J Biomech, 23, 475, 10.1016/0021-9290(90)90303-K

Tortopidid, 1999, Bite force, endurance and masseter muscle fatigue in healthy edentulous subjects and those with TDM, J Oral Rehabil, 26, 321, 10.1046/j.1365-2842.1999.00383.x

Vanzyl, 1995, Three-dimensional finite element model of a human mandible incorporating six osseointegrated implants for stress analysis of mandibular cantilever prostheses, Int J of Oral Maxillofac Implants, 10, 51

Carter, 1987, Trabecular bone density and loading history: regulation of connective tissue biology by mechanical energy, J Biomech, 20, 785, 10.1016/0021-9290(87)90058-3

Lacroix, 2002, Biomechanical model to simulate tissue differentiation and bone regeneration: application to fracture healing, Med Bio Eng Computing, 40, 14, 10.1007/BF02347690