A comparison on predictive models of gas explosions

J. S. Puttock, M. R. Yardley and T. M. Cresswell, J. of Loss Prevention in the Process Industries, 13, 419 (2000). R. S. Cant, W. N. Dawes and A. M. Savill, Annual Review of Fluid Mechanics, 36, 97 (2004). M.G. Cooper, M. Fairweather and J. P. Tite, Combustion and Flame, 65, 1 (1986). D. Bradley and A. Mitcheson, Combustion and Flame, 32, 221 (1978). D. Bradley and A. Mitcheson, Combustion and Flame, 32, 237 (1978). G. A. Lunn, Health & Safety Executive Internal Report IR/L/DE/83/4, UK (1983). NFPA, National Fire Protection Association, Quincy, MA, USA (1998). V. Molkov, R. Dobashi, M. Suzuki and T. Hirano, J. of Loss Prevention in the Process Industries, 12, 147 (1999). V. Molkov, R. Dobashi, M. Suzuki and T. Hirano, J. of Loss Prevention in the Process Industries, 13, 397 (2000). D. M. Solberg, J. A. Pappas and E. Skramstad, 8th Symposium (International) on Combustion, Combustion Institute, Pittsburgh, Pennsylvania, U.S.A., 1607 (1981). C. Yao, J. of Loss Prevention in the Process Industries, 8, 1 (1974). P. A. Cubbage and W. A. Simmonds, Trans Inst Gas Engng, 470 (1955). D. M. Razus and U. Krause, Fire Safety Journal, 36, 1 (2001). M. J. Tang and Q. A. Baker, Process Safety Progress, 18, 235 (1999). B. J. Wiekema, J. of Hazardous Materials, 3, 221 (1980). W. P. M. Mercx and A. C. Van den Berg, Process Safety Progress, 16, 152 (1997). A. C. Van den Berg, J. of Hazardous Materials, 12, 1 (1985). A. C. Van den Berg and A. Lannoy, J. of Hazardous Materials, 34, 151 (1993). A. C. Van den Berg and N. H. A. Versloot, J. of Loss Prevention in the Process Industries, 16, 111 (2003). CCPS, Centre for Chemical Process Safety, AIChE, New York, USA (1994). CCPS, Centre for Chemical Process Safety, AIChE, New York, USA (1999). Q. A. Baker, M. J. Tang, E. A. Scheier and G. J. Silva, Process Safety Progress, 15, 106 (1996). Q. A. Baker, C. M. Doolittle, G. A. Fitzgerald and M. J. Tang, Process Safety Progress, 19, 297 (1998). A. T. Cates and B. Samuels, J. of Loss Prevention in the Process Industries, 4, 287 (1991). J. S. Puttock, 2nd European Conference on Major Hazards On- and Off-shore, Manchester, UK, 24–26 September (1995). J. S. Puttock, Int. Conference and Workshop on Modeling the Consequence of Accidental Releases of Hazardous Materials, San Francisco, Sept–Oct (1999). R. P. Cleaver, C. E. Humphreys, J. D. Morgan and C. G. Robinson, J. of Hazardous Materials, 53, 35 (1997). K. N. C. Bray, P. A. Libby and J. B. Moss, Combustion and Flame, 61, 87 (1985). J. S. Puttock, T.M. Cresswell, P. R. Marks, B. Samuels and A. Prothero, HSE Offshore Technology Report, OTO 96 004 (1996). N. Nehzat, Ph.D. Thesis, University of New South Wales, Sydney, Australia (1998). C. J. Lea and H. S. Ledin, HSL Report, Health and Safety Laboratory, Buxton, UK (2002). B. H. Hjertager, J. of Hazardous Materials, 34, 173 (1993). B. H. Hjertager, O. Sæter and T. Solberg, 2nd Int. Specialist Meeting on Fuel-Air Explosions, Christian Michelsen Research a.s., Bergen, Norway, June 26 (1996). B. H. Hjertager, Modelling, Identification and Control, 5, 211 (1985). D. J. Gardner and J. Hulme, Offshore Technology Report, Health and Safety Executive, UK (1994). O. Sæter, PhD. Thesis, Telemark College, Norway (1998). P. Naamansen, Ph.D. Thesis, Aallborg University, Denmark (2002). B. F. Magnussen and B. H. Hjertager, 16th Int. Symposium on Combustion, Combustion Institute, Pittsburgh, Pennsylvania, U.S.A., 719 (1976). B. H. Hjertager, University of Waterloo Press, Waterloo, Ont., SM study No. 16, 407 (1982). I. O. Moen and J. H. S. Lee, Combustion and Flame, 47, 31 (1982). C. Chan, I. O. Moen and J. H. S. Lee, Combustion and Flame, 49, 27 (1983). B. H. Hjertager, Modelling Identification and Control, 5, 211 (1985). S. V. Pantankar and D. B. Spalding, Int. J. of Heat and Mass Transfer, 15, 1787 (1972). B. H. Hjertager, T. Solberg and K. O. Nymoen, J. of Loss Prevention in the Process Industries, 5, 165 (1991). O. Sæter, T. Solberg and B. H. Hjertager, 4th Int. Conference and Exhibition on Offshore Structures - Hazards, Safety and Engineering Working in the New Era, London, UK, 12–13 December (1995). O. Sæter, PhD. Thesis, Telemark College, Norway (1998). S. Høiset, B. H. Hjertager, T. Solberg and K. A. Malo, J. of Hazardous Materials, 77, 1 (2000). B. J. Arntzen, Ph.D. thesis, Norwegian University of Science and Technology, Norway (1998). D. Bjerketvedt, J. R. Bakke and K. Van Wingerden, J. of Hazardous Materials, 52, 1 (1997). J. R. Bakke and B. H. Hjertager, Int. J. for Numerical Methods in Engineering, 24, 129 (1987). A. C. Van den Berg, H.G. The, W. P. M. Mercx, Y. Mouilleau and C. J. Hayhurst, 8th Int. Symposium, Loss Prevention and Safety Promotion in the Process Industries, Antwerp, Belgium, 6–9 June (1995). V. Tam, T. Moros, S. Webb, J. Allinson, R. Lee and E. Bilimoria, J. of Loss Prevention in the Process Industries, 9, 317 (1996). K. Van Wingerden, O. R. Hansen and P. Foisselon, Process Safety Progress, 18, 17 (1999). D. B. Spalding, 16th Int. Symposium on Combustion, Combustion Institute, Pittsburgh, Pennsylvania, U.S.A., 1657 (1977). K. N. C. Bray, Proceeding of the Royal Society of London, A431, 315 (1990). W. P. M. Mercx, Trans IChemE, 70, 197 (1992). W. P. M. Mercx, D. M. Johnson and J. Puttock, Process Safety Progress, 14, 120 (1995). C. A. Selby and B. A. Burgan, SCI-253, Steel Construction Institute, Ascot, UK (1998). C. J. Hayhurst, N. J. Robertson, K. C. Moran, R. A. Clegg and G. E. Fairlie, 7th Annual Conference on Offshore Installations, London, December (1998). M. C. Rogers, T. Barnes, G. E. Fairlie and K. Littlebury, Safety on Offshore Installations, London, November (1999). J. C. A. Windhorst, Int. Conference & Workshop on Risk Analysis in Process Safety, Atlanta, 21 October (1997). J. C. A. Windhorst, Int. Conference and Workshop on Modeling the Consequences of Accidental Releases of Hazardous Materials, San Francisco, California, 28 September–1 October (1999). W. P. M. Mercx, A. C. Van den Berg, C. J. Hayhurst, N. J. Robertson and K. C. Moran, J. of Hazardous Materials, 71, 301 (2000). M. Fairweather, G. K. Hargrave, S. S. Ibrahim and D.G. Walker, Combustion and Flame, 116, 504 (1999). C. A. Catlin, M. Fairweather and S. S. Ibrahim, Combustion and Flame, 102, 115 (1995). A. R. Green, I. Piper and R.W. Upfold, Proc. 25th Int. Conference of Safety in Mines Research Institutes, Pretoria, 13–17 September, 59 (1993). A. R. Green and N. Nehzat, Proc. of The Second Asia-Pacific Conference on Combustion (1999). D. J. Freeman, Trans. IChemE, 73, 11 (1995). C. J. Lea and D. J. Freeman, HSE Internal Report IR/L/FR/93/18, IR/L/GE/93/14, UK (1993). D. K. Pritchard, D. J. Freeman and P. W. Guilbert, J. of Loss Prevention in the Process Industries, 9, 205 (1996). P. W. Guilbert and I. P. Jones, HSE Contract Research Report, UK K. Phylaktou and G. E. Andrews, J. of Loss Prevention in the Process Industries, 6, 1 (1993). T. Huld, G. Peter and H. Stadtke, J. of Hazardous Materials, 46, 185 (1996). H. Wilkening and T. Huld, 17th Int. Colloquium on the Dynamics of Explosions and Reactive Systems, Heidelberg, Germany 25–30 July (1999). J. K. Clutter and R. T. Luckritz, J. of Hazardous Materials, 79, 41 (2000). S. S. Brahim and A. R. Masri, J. of Loss Prevention in the Process Industries, 14, 213 (2001). A. R. Masri, S. S. Ibrahim, N. Nehzat and A. R. Green, Experimental Thermal and Fluid Science, 21, 109 (2000). S. Patal, S. S. Ibrahim, M. A. Yehia and G. K. Hargrave, Experimental Thermal and Fluid Science, 27, 355 (2003). A. R. Masri, S. S. Ibrahim and B. J. Cadwallader, Experimental Thermal and Fluid Science, 30, 687 (2006). M. P. Kirkpatrick, PhD thesis, The University of Sydney, Australia (2002). V.V. Molkov and D.V. Makarov, Process Safety and Environmental Protection, 84(B1), 33 (2006). G. Ciccarelli, V. M. Fthenakis and J. L. Boccio, J. of Loss Prevention in the Process Industries, 12, 157 (1999). W.W. Madsen and R. C. Wanger, Process Safety Progress, 13, 171 (1994). P. A. Kinsella, J. of Hazardous Materials, 33, 1 (1993). R. G. Abdel-Gayed, D. Bradley and M. Lawes, Proceeding of the Royal Society of London, A414, 389 (1987). D. J. Park, A. R. Green, Y. S. Lee and Y. C. Chen, Combustion and Flame, 150, 27 (2007). D. J. Park, Y. S. Lee and A. R. Green, J. of Hazardous Materials, 153, 340 (2008)