A comparative assessment of multicriteria parametric optimization methods for plasma arc cutting processes

Panchal, 2020, A review on optimization of plasma arc cutting parameters using Taguchi method for EN19, J. Sci. Technol., 5, 172, 10.46243/jst.2020.v5.i3.pp172-191 Ramakrishnan, 2018, Experimental investigation of cut quality characteristics on SS321 using plasma arc cutting, J. Braz. Soc. Mech. Sci. Eng., 40, 60, 10.1007/s40430-018-0997-8 Gostimirović, 2020, An experimental analysis of cutting quality in plasma arc machining, Adv. Technol. Mater., 45, 1 Hema, 2020, Experimental investigations on SS 304 alloy using plasma arc machining, SN Appl. Sci., 2, 624, 10.1007/s42452-020-2350-y Peko, 2021, Modeling and optimization of cut quality responses in plasma jet cutting of aluminium alloy EN AW-5083, Materials, 14, 5559, 10.3390/ma14195559 Chowdhury, 2022, Optimization of CNC turning of aluminium 6082-T6 alloy using fuzzy multi-criteria decision-making methods: A comparative study, Int. J. Interact. Des. Manuf. Kalita, 2022, Parametric optimization of non-traditional machining processes using multi-criteria decision making techniques: Literature review and future directions, Multiscale Multidiscip. Model. Exp. Des. Chakraborty, 2022, A scoping review on the applications of MCDM techniques for parametric optimization of machining processes, Arch. Comput. Methods Eng., 29, 4165, 10.1007/s11831-022-09731-w Das, 2014, Optimization of process parameters in plasma arc cutting of EN 31 steel based on MRR and multiple roughness characteristics using grey relational analysis, Procedia Mater. Sci., 5, 1550, 10.1016/j.mspro.2014.07.342 Adalarasan, 2015, Application of grey Taguchi-based response surface methodology (GT-RSM) for optimizing the plasma arc cutting parameters of 304L stainless steel, Int. J. Adv. Manuf. Technol., 78, 1161, 10.1007/s00170-014-6744-0 Maity, 2015, Effect of process parameters on cut quality of stainless steel of plasma arc cutting using hybrid approach, Int. J. Adv. Manuf. Technol., 78, 161, 10.1007/s00170-014-6552-6 Renangi, 2015, Multi objective optimization of process parameters in plasma arc cutting of SS 420 using grey-Taguchi analysis, Int. J. Adv. Eng. Res. Sci., 2, 1 P. Tejas, V. Pate, P. Patel, Parametric optimization of plasma arc cutting process parameter for Inconel 718 alloy material using grey relational analysis, Technix Int. J. Eng. Res. 2 (3) 120–127. Agarwal, 2019, Optimizing plasma arc cutting parameters for structural steel using grey relational analysis, Int. J. Eng. Res. Technol., 8, 27 Pothur, 2022, Experimental investigations on process parameters of stainless steel 410 alloy by plasma arc machining process using grey relational analysis with entropy measurement, Mater. Today: Proceedings, 62, 559, 10.1016/j.matpr.2022.03.592 Khan, 2016, Parametric optimization of some non-conventional machining processes using MOORA method, Int. J. Eng. Res. Africa, 20, 19 Hamdy, 2019, Multi-objective optimization of plasma arc cutting process using MOORA combined with GA, Eng. Res. J., 42, 219 K. Muhamedagic, D. Begic-Hajdarevic, M. Pasic, A. Cekic, Optimization of process parameters in plasma arc cutting using TOPSIS method, in: Proc. of 29th DAAAM International Symposium, Austria, 2018, pp. 202–209. Ananthakumar, 2019, Measurement and optimization of multi-response characteristics in plasma arc cutting of Monel 400™ using RSM and TOPSIS, Measurement, 135, 725, 10.1016/j.measurement.2018.12.010 Siva Kumar, 2021, A hybrid approach of ANFIS-artificial bee colony algorithm for intelligent modeling and optimization of plasma arc cutting on Monel™ 400 alloy, Materials, 14, 6373, 10.3390/ma14216373 Naik, 2018, An optimization and experimental analysis of plasma arc cutting of Hardox-400 using Taguchi based desirability analysis, Mater. Today: Proceedings, 5, 13157, 10.1016/j.matpr.2018.02.306 Mangaraj, 2022, Experimental study of a portable plasma arc cutting system using hybrid RSM-nature inspired optimization technique, Mater. Today: Proceedings, 50, 867, 10.1016/j.matpr.2021.06.138 Rao, 2016, A new multi-objective jaya algorithm for optimization of modern machining processes, Adv. Prod. Eng. Manag., 11, 271 Patel, 2018, Machining performance optimization during plasma arc cutting of AISI D2 steel: Application of FIS, nonlinear regression and JAYA optimization algorithm, J. Braz. Soc. Mech. Sci. Eng., 40, 240, 10.1007/s40430-018-1087-7 Patel, 2018, Optimization of surface roughness in plasma arc cutting of AISID2 steel using TLBO, Mater. Today: Proceedings, 5, 18927, 10.1016/j.matpr.2018.06.242 Salonitis, 2012, Experimental investigation of the plasma arc cutting process, Procedia CIRP, 3, 287, 10.1016/j.procir.2012.07.050 Sharma, 2020, Optimization of dross formation rate in plasma arc cutting process by response surface method, Mater. Today: Proceedings, 32, 354, 10.1016/j.matpr.2020.01.605 Hamood, 2020, Optimization of plasma cutting parameters on dimensional accuracy and machining time for low carbon steel, Eng. Technol. J., 38, 1160, 10.30684/etj.v38i8A.1151 Gani, 2021, Optimisation of cutting parameters and surface deformation during thin steel sheets plasma processing using Taguchi approach, Adv. Mech. Eng., 13, 1, 10.1177/16878140211030401 Karthick, 2022, Optimization of plasma arc cutting parameters on machining of Inconel 718 superalloy, J. Nanomater., 13 Shivakoti, 2021, Selection of optimal turning parameters using multi-criteria decision methods, J. Mult.-Valued Logic Soft Comput., 37, 601 Das, 2022, Application of grey correlation-based EDAS method for parametric optimization of non-traditional machining processes, Sci. Iran. Trans. E: Ind. Eng., 29, 864 Sharma, 2017, Experimental analysis and optimization of process parameters in plasma arc cutting machine of EN-45A material using Taguchi and ANOVA method, Int. J. Mech. Ind. Eng., 11, 1387 Naik, 2018, Application of desirability function based response surface methodology (DRSM) for investigating the plasma arc cutting process of sailhard steel, World J. Eng., 15, 505, 10.1108/WJE-06-2017-0125 Rajamani, 2018, Experimental investigation and optimization of PAC parameters on Monel 400™ superalloy, Mater. Manuf. Process., 33, 1864, 10.1080/10426914.2018.1532085 Masoudi, 2019, Development of an intelligent model to optimize heat-affected zone, kerf, and roughness in 309 stainless steel plasma cutting by using experimental results, Mater. Manuf. Processes, 34, 345, 10.1080/10426914.2018.1532579 Diakoulaki, 1995, Determining objective weights in multiple criteria problems: The CRITIC method, Comput. Oper. Res., 22, 763, 10.1016/0305-0548(94)00059-H Keshavarz-Ghorabaee, 2021, Determination of objective weights using a new method based on the removal effects of criteria (MEREC), Symmetry, 13, 10.3390/sym13040525 Shanmugasundar, 2022, Application of MEREC in multi-criteria selection of optimal spray-painting robot, Processes, 10, 1172, 10.3390/pr10061172 Trung, 2021, Application of EDAS, MARCOS, TOPSIS, MOORA and PIV methods for multi-criteria decision making in milling process, J. Mech. Eng., 71, 69 Trung, 2021, A multi-criteria decision-making in turning process using the MAIRCA, EAMR, MARCOS and TOPSIS methods: A comparative study, Adv. Prod. Eng. Manag., 16, 443 Besharati, 2016, Multi-objective selection and structural optimization of the gantry in a gantry machine tool for improving static, dynamic, and weight and cost performance, Concurr. Eng.: Res. Appl., 24, 83, 10.1177/1063293X15597047 Trung, 2022, Multi-criteria decision making of turning operation based on PEG, PSI and CURLI methods, Manuf. Rev., 9, 9 Žižović, 2020, Eliminating rank reversal problem using a new multi-attribute model - The RAFSI method, Mathematics, 8, 10.3390/math8061015 Pamučar, 2020, Development of a multi-criteria model for sustainable reorganization of a healthcare system in an emergency situation caused by the COVID-19 pandemic, Sustainability, 12, 10.3390/su12187504 Pothur, 2020, Experimental investigations on Inconel 625 alloy using plasma arc machining, Int. J. Manuf. Mater. Mech. Eng., 10, 40