A comparative assessment of energy demand and life cycle costs for additive- and subtractive-based manufacturing approaches

Valerga Puerta, 2018, Criteria selection for a comparative study of functional performance of fused deposition modelling and vacuum casting processes, J Manuf Process, 35, 721, 10.1016/j.jmapro.2018.08.033 Ahmed, 2019, Direct metal fabrication in rapid prototyping: a review, J Manuf Process, 42, 167, 10.1016/j.jmapro.2019.05.001 Rejeski, 2018, Research needs and recommendations on environmental implications of additive manufacturing, Addit Manuf, 19, 21 Gutowski, 2017, Note on the rate and energy efficiency limits for additive manufacturing, J Ind Ecol, 21, S69, 10.1111/jiec.12664 Costabile, 2017, Cost models of additive manufacturing: a literature review, Int J Ind Eng Comput, 8, 263 Hopkinson, 2003, Analysis of rapid manufacturing - using layer manufacturing processes for production, Proc Inst Mech Eng Part C: J Mech Eng Sci, 217, 31, 10.1243/095440603762554596 Ruffo, 2006, Cost estimation for rapid manufacturing - laser sintering production for low to medium volumes, Proc Inst Mech Eng Part B J Eng Manuf, 220, 1417, 10.1243/09544054JEM517 Ruffo, 2007, Cost estimation for rapid manufacturing - simultaneous production of mixed components using laser sintering, Proc Inst Mech Eng Part B J Eng Manuf, 221, 1585, 10.1243/09544054JEM894 Yang, 2018, Cost modeling and analysis for Mask Image Projection Stereolithography additive manufacturing: simultaneous production with mixed geometries, Int J Prod Econ, 206, 146, 10.1016/j.ijpe.2018.09.023 Chan, 2018, Data-driven cost estimation for additive manufacturing in cybermanufacturing, J Manuf Syst, 46, 115, 10.1016/j.jmsy.2017.12.001 Atzeni, 2012, Economics of additive manufacturing for end-usable metal parts, Int J Adv Manuf Technol, 62, 1147, 10.1007/s00170-011-3878-1 Rickenbacher, 2013, An integrated cost-model for selective laser melting (SLM), Rapid Prototyp J, 19, 208, 10.1108/13552541311312201 Baumers, 2013, Transparency built-in; energy consumption and cost estimation for additive manufacturing, J Ind Ecol, 15, 418, 10.1111/j.1530-9290.2012.00512.x Manogharan, 2016, Additive manufacturing-integrated hybrid manufacturing and subtractive processes: economic model and analysis, Int J Comput Integr Manuf, 29, 473, 10.1080/0951192X.2015.1067920 Manoharan, 2019, Comparing the economics of metal additive manufacturing processes for micro-scale plate reactors in the chemical process industry, Procedia Manuf, 34, 603, 10.1016/j.promfg.2019.06.168 Baumers, 2016, The cost of additive manufacturing: machine productivity, economies of scale and technology-push, Technol Forecast Soc Change, 102, 193, 10.1016/j.techfore.2015.02.015 Baumers, 2017, Informing additive manufacturing technology adoption: total cost and the impact of capacity utilization, Int J Prod Res, 55, 6957, 10.1080/00207543.2017.1334978 Laureijs, 2017, Metal additive manufacturing: cost competitive beyond low volumes, J Manuf Sci Eng, 139, 10.1115/1.4035420 Kamps, 2018, Cost- and energy-efficient manufacture of gears by laser beam melting, Cirp J Manuf Sci Technol, 21, 47, 10.1016/j.cirpj.2018.01.002 Haapala, 2013, A review of engineering research in sustainable manufacturing, J Manuf Sci Eng, 135, 10.1115/1.4024040 Duflou, 2012, Towards energy and resource efficient manufacturing: a processes and systems approach, CIRP Ann Manuf Technol, 61, 587, 10.1016/j.cirp.2012.05.002 Dahmus, 2004, An environmental analysis of machining Zhou, 2016, Energy consumption model and energy efficiency of machine tools: a comprehensive literature review, J Clean Prod, 112, 3721, 10.1016/j.jclepro.2015.05.093 Rejeski, 2018, Research needs and recommendations on environmental implications of additive manufacturing, Addit Manuf, 19, 21 Liu, 2018, Energy consumption in additive manufacturing of metal parts, Procedia Manuf, 26, 834, 10.1016/j.promfg.2018.07.104 Nagarajan, 2018, Characterizing the influence of resource-energy-exergy factors on the environmental performance of additive manufacturing systems, J Manuf Syst, 201, 87, 10.1016/j.jmsy.2018.06.005 Jackson, 2016, A comparison of energy consumption in wire-based and powder-based additive-subtractive manufacturing, Procedia Manuf, 5, 989, 10.1016/j.promfg.2016.08.087 Chan, 2014, Comparing the sustainability performance of metal-based additive manufacturing processes Doran, 2016, An approach to compare sustainability performance of additive and subtractive manufacturing during process planning Priarone, 2017, Influence of material‐related aspects of additive and subtractive Ti-6Al-4V manufacturing on energy demand and carbon dioxide emissions, J Ind Ecol, 21, S191, 10.1111/jiec.12523 Priarone, 2017, Towards criteria for sustainable process selection: on the modelling of pure subtractive versus additive/subtractive integrated manufacturing approaches, J Clean Prod, 144, 57, 10.1016/j.jclepro.2016.12.165 Ingarao, 2018, Environmental modelling of aluminium based components manufacturing routes: additive manufacturing versus machining versus forming, J Clean Prod, 176, 261, 10.1016/j.jclepro.2017.12.115 Priarone, 2018, The role of re-design for Additive Manufacturing on the process environmental performance, Procedia CIRP, 69, 124, 10.1016/j.procir.2017.11.047 Karlsson, 2015, Surface oxidation behavior of Ti-6Al-4V manufactured by Electron Beam Melting (EBM®), J Manuf Process, 17, 120, 10.1016/j.jmapro.2014.08.005 Parthasarathy, 2011, A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications, J Manuf Process, 13, 160, 10.1016/j.jmapro.2011.01.004 Huang, 2016, Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components, J Clean Prod, 135, 1559, 10.1016/j.jclepro.2015.04.109 Helms, 2006, The potential contribution of light-weighting to reduce transport energy consumption, Int J Life Cycle Assess Watson, 2018, A decision-support model for selecting additive manufacturing versus subtractive manufacturing based on energy consumption, J Clean Prod, 176, 1316, 10.1016/j.jclepro.2015.12.009 Morrow, 2007, Environmental aspects of laser-based and conventional tool and die manufacturing, J Clean Prod, 15, 932, 10.1016/j.jclepro.2005.11.030 Faludi, 2017, Environmental impacts of selective laser melting. Do printer, powder, or power dominate?, J Ind Ecol, 21, S144, 10.1111/jiec.12528 Frischknecht, 2015, Cumulative energy demand in LCA: the energy harvested approach, Int J Life Cycle Assess, 20, 957, 10.1007/s11367-015-0897-4 Priarone, 2019, A modelling framework for comparing the environmental and economic performance of WAAM-based integrated manufacturing and machining, CIRP Ann Manuf Technol, 68, 37, 10.1016/j.cirp.2019.04.005 Hammond, 2010 CES Selector, 2017 Mayyas, 2012, Life cycle assessment based selection for a sustainable lightweight body-in-white design, Energy, 39, 412, 10.1016/j.energy.2011.12.033 Paris, 2016, Comparative environmental impacts of additive and subtractive manufacturing technologies, CIRP Ann Manuf Technol, 65, 29, 10.1016/j.cirp.2016.04.036 Baumers, 2017, Shape complexity and process energy consumption in Electron Beam Melting. A case of something for nothing in additive manufacturing?, J Ind Ecol, 21, S157, 10.1111/jiec.12397 Baumers, 2012 Weinert, 2004, Dry machining and minimum quantity lubrication, CIRP Ann Manuf Technol, 53, 511, 10.1016/S0007-8506(07)60027-4 Li, 2011, An empirical model for predicting energy consumption of manufacturing processes: a case of turning process, Proc Inst Mech Eng Part B J Eng Manuf, 225, 1636, 10.1177/2041297511398541 Priarone, 2018, On the concurrent optimization of environmental and economic targets for machining, J Clean Prod, 190, 630, 10.1016/j.jclepro.2018.04.163 Priarone, 2017, Vol. 68, 723 Baumers, 2011, Energy inputs to additive manufacturing: does capacity utilization matter? Ingarao, 2020, Guidelines to compare additive and subtractive manufacturing approaches under the energy demand perspective, Int J Sustain Manuf, 4, 266