A bistable vibration energy harvester with spherical moving magnets: Theoretical modeling and experimental validation

Carneiro, 2020, Electromagnetic energy harvesting using magnetic levitation architectures: a review, Appl. Energy, 260, 10.1016/j.apenergy.2019.114191 Dewan, 2014, Alternative power sources for remote sensors: a review, J. Power Sources, 245, 129, 10.1016/j.jpowsour.2013.06.081 Fu, 2021, Rotational energy harvesting for self-powered sensing, Joule, 5, 1074, 10.1016/j.joule.2021.03.006 Khan, 2019, Flow type electromagnetic based energy harvester for pipeline health monitoring system, Energy Convers. Manag., 200, 10.1016/j.enconman.2019.112089 Fu, 2019, Rotational energy harvesting using bi-stability and frequency up-conversion for low-power sensing applications: theoretical modelling and experimental validation, Mech. Syst. Signal Process., 125, 229, 10.1016/j.ymssp.2018.04.043 Ghufran Aldawooda, 2019, High power density spring assisted nonlinear electromagnetic vibration energy harvester for low base accelerations, Appl. Energy, 113546, 1 Halim, 2018, An electromagnetic rotational energy harvester using sprung eccentric rotor, driven by pseudo-walking motion, Appl. Energy, 217, 66, 10.1016/j.apenergy.2018.02.093 Sodano, 2004, A review of power harvesting from vibration using piezoelectric materials, Shock Vib. Dig., 36, 197, 10.1177/0583102404043275 Fu, 2019, An energy-efficient cyber-physical system for wireless on-board aircraft structural health monitoring, Mech. Syst. Signal Process., 128, 352, 10.1016/j.ymssp.2019.03.050 Wang, 2021, On-rotor electromagnetic energy harvester for powering a wireless condition monitoring system on bogie frames, Energy Convers. Manag., 243, 10.1016/j.enconman.2021.114413 Harne, 2013, A review of the recent research on vibration energy harvesting via bistable systems, Smart Mater. Struct., 22, 1, 10.1088/0964-1726/22/2/023001 Zhao, 2019, Magnetically modulated orbit for human motion energy harvesting, Appl. Phys. Lett., 115, 1, 10.1063/1.5131193 Zhang, 2018, Design, modeling and experimental verification of circular Halbach electromagnetic energy harvesting from bearing motion, Energy Convers. Manag., 180, 811 Zhao, 2022, Dynamically synergistic regulation mechanism for rotation energy harvesting, Mech. Syst. Signal Process., 169, 10.1016/j.ymssp.2021.108637 Kim, 2019, Electromagnetic energy harvester based on a finger trigger rotational gear module and an array of disc Halbach magnets, Appl. Energy, 250, 776, 10.1016/j.apenergy.2019.05.059 Karami, 2011, Electromechanical modeling of the low-frequency zigzag micro-energy harvester, J. Intell. Mater. Syst. Struct., 22, 271, 10.1177/1045389X11398164 Nammari, 2018, Fabrication and characterization of non-resonant magneto-mechanical low-frequency vibration energy harvester, Mech. Syst. Signal Process, 102, 298, 10.1016/j.ymssp.2017.09.036 Xu, 2016, A novel tunable multi-frequency hybrid vibration energy harvester using piezoelectric and electromagnetic conversion mechanisms, Appl. Sci., 6, 1, 10.3390/app6010010 Tehrani, 2014, Extending the dynamic range of an energy harvester using nonlinear damping, J. Sound Vib., 333, 623, 10.1016/j.jsv.2013.09.035 Berdy, 2015, Kinetic energy harvesting from human walking and running using a magnetic levitation energy harvester, Sens. Actuators A. Phys., 222, 262, 10.1016/j.sna.2014.12.006 Yamashita, 2019, Ultra-low-power energy harvester for microbial fuel cells and its application to environmental sensing and long-range wireless data transmission, J. Power Sources, 430, 1, 10.1016/j.jpowsour.2019.04.120 Gutierrez, 2015, Design and characterization of a low frequency 2-dimensional magnetic levitation kinetic energy harvester, Sens. Actuators A: Phys., 236, 1, 10.1016/j.sna.2015.10.009 Aouali, 2020, Efficient broadband vibration energy harvesting based on tuned non-linearity and energy localization, Smart Mater. Struct., 29, 10LT01, 10.1088/1361-665X/abaa95 Apo, 2014, High power density levitation-induced vibration energy harvester, Energy Harvest Syst., 1, 79, 10.1515/ehs-2013-0005 Berdy, 2014, Design and optimization of a magnetically sprung block magnet vibration energy harvester, Sens. Actuators A. Phys., 218, 69, 10.1016/j.sna.2014.06.011 Chen, 2013, Analysis of compliance effects on power generation of a nonlinear electromagnetic energy harvesting unit; theory and experiment, Smart Mater. Struct., 22, 10.1088/0964-1726/22/9/094027 Abed, 2016, Multi-modal vibration energy harvesting approach based on nonlinear oscillator arrays under magnetic levitation, Smart Mater. Struct., 25, 10.1088/0964-1726/25/2/025018 Gao, 2018, Experimental investigation of non-linear multistable electromagnetic-induction energy harvesting mechanism by magnetic levitation oscillation, Appl. Energy, 220, 856, 10.1016/j.apenergy.2018.03.170 Fang, 2021, Multistability phenomenon in signal processing, energy harvesting, composite structures, and metamaterials: a review, Mech. Syst. Signal Process., 166 Masana, 2011, Electromechanical modeling and nonlinear analysis of axially loaded energy harvesters, J. Vib. Acoust., 133, 10.1115/1.4002786 Ferrari, 2009, Improved energy harvesting from wideband vibrations by nonlinear piezoelectric converters, Sens. Actuators A Phys., 162, 425, 10.1016/j.sna.2010.05.022 Xu, 2016, Modeling and experimental validation of bi-stable beam based piezoelectric energy harvester, Energy Harvest. Syst., 3, 313, 10.1515/ehs-2015-0022 Masana, 2011, Relative performance of a vibratory energy harvester in mono- and bi-stable potentials, J. Sound Vib., 330, 6036, 10.1016/j.jsv.2011.07.031 Erturk, 2011, Broadband piezoelectric power generation on high-energy orbits of the bistable duffing oscillator with electromechanical coupling, J. Sound Vib., 330, 2339, 10.1016/j.jsv.2010.11.018 Mann, 2009, Energy harvesting from the nonlinear oscillations of magnetic levitation, J. Sound Vib., 319, 515, 10.1016/j.jsv.2008.06.011 Salauddin, 2017, Design and experiment of human hand motion driven electromagnetic energy harvester using dual Halbach magnet array[J], Smart Mater. Struct., 26, 10.1088/1361-665X/aa573f H. Fu, Y. Zhang, M. Liu, Y. Qin, E.M. Yeatman, A bistable energy harvester for self-powered sensing in rail transport condition monitoring. In: Proceedings of the 2021 21st International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers), IEEE. 2021. 140–143. Soares dos Santos, 2016, Magnetic levitation-based electromagnetic energy harvesting: a semi-analytical non-linear model for energy transduction, Sci. Rep., 6, 18579, 10.1038/srep18579 Hailing, 2020, Ultra-low frequency energy harvesting using bi-stability and rotary-translational motion in a magnet-tethered oscillator, Nonlinear Dyn., 101, 2131, 10.1007/s11071-020-05889-9 Moss, 2014, Hybrid rotary-translational vibration energy harvester using cycloidal motion as a mechanical amplifier, Appl. Phys. Lett., 104, 33506, 10.1063/1.4861601 Halim, 2015, Design and experiment of a human-limb driven, frequency up-converted electromagnetic energy harvester, Energy Convers. Manag., 10.1016/j.enconman.2015.09.065 Halim, 2015, Modeling and experiment of ahandy motion driven, frequency up-converting electromagnetic energy harvester using transverse impact by spherical ball, Sens. Actuators A Phys., 229, 50, 10.1016/j.sna.2015.03.024 Li, 2019, High-performance low-frequency bistable vibration energy harvesting plate with tip mass blocks, Energy, 180, 737, 10.1016/j.energy.2019.05.002