A Techno-economic analysis and systematic review of carbon capture and storage (CCS) applied to the iron and steel, cement, oil refining and pulp and paper industries, as well as other high purity sources

Al-Juaied, M., Whitmore A., 2009. Realistic Costs of Carbon Capture. Energy Technology Innovation Policy.

Arasto, 2013, Costs and potential of carbon capture and storage at an integrated steel mill, Energy Procedia, 37, 7117, 10.1016/j.egypro.2013.06.648

Arasto, 2013, Post-combustion capture of CO2 at an integrated steel mill—Part I: technical concept analysis, Int. J. Greenhouse Gas Control, 16, 271, 10.1016/j.ijggc.2012.08.018

Barker, 2009, CO2 capture in the cement industry, Energy Procedia, 1, 87, 10.1016/j.egypro.2009.01.014

Birat, 2003, CO2 mitigation technologies in the steel industry: a benchmarking study based on process calculations

Birat, 2010, Steel sectoral report

Birshan, 2015

Bombourg, 2012

Boot-Handford, 2014, Carbon capture and storage update, Energy Environ. Sci., 7, 130, 10.1039/C3EE42350F

Brown, 2012

Carpenter, 2012

Sectoral Assessment: Refineries, in Global Technology Roadmap for CCS in Industry. 2010, Det Norske Veritas.

Damodaran, A., 2017. Margins by Sector (US), NYU Stern.

Dean, 2011, The calcium looping cycle for CO2 capture from power generation: cement manufacture and hydrogen production, Chem. Eng. Res. Des., 89, 836, 10.1016/j.cherd.2010.10.013

Dean, 2011, Investigation into potential synergy between power generation, cement manufacture and CO2 abatement using the calcium looping cycle, Energy Environ. Sci., 4, 2050, 10.1039/c1ee01282g

Farla, 1995, Carbon dioxide recovery from industrial processes, Climatic Change, 29, 439, 10.1007/BF01092428

Fennell, 2012

Fischedick, 2014

Gazzani, 2013, Application of sorption enhanced water gas shift for carbon capture in integrated steelworks, Energy Procedia, 37, 7125, 10.1016/j.egypro.2013.06.649

Gielen, 2003, CO2 removal in the iron and steel industry, Energy Conversion Manag., 44, 1027, 10.1016/S0196-8904(02)00111-5

Hegerland, 2006

Herzog, 2009

Hills, 2017, LEILAC: Low cost CO2 capture for the cement and lime industries, Energy Procedia, 10.1016/j.egypro.2017.03.1753

Ho, 2011, Comparison of MEA capture cost for low CO2 emissions sources in Australia, Int. J. Greenhouse Gas Control, 5, 49, 10.1016/j.ijggc.2010.06.004

Huijgen, 2007, Cost evaluation of CO2 sequestration by aqueous mineral carbonation, Energy Conversion Manag., 48, 1923, 10.1016/j.enconman.2007.01.035

Energy Technology Perspectives 2012, 2012. International Energy Agency.

CO2 capture in the cement industry, 2008. International Energy Agency.

Technology Roadmap—Carbon Capture and Storage in Industrial Applications. 2011, International Energy Agency.

Technology Roadmap—Carbon capture and storage, 2013. International Energy Agency.

Iron and Steel CCS Study Iron and Steel CCS Study (Techno-economics integrated steel mill), 2013. IEAGHG.

Deployment of CCS in the Cement Industry, 2013. IEAGHG.

Exchange Rate Archives by Month, 2015. International Monetary Fund.

IPCC Special Report on Carbon Dioxide Capture and Storage, in Working Group III of the Intergovernmental Panel on Climate Change. 2005, Intergovernmental Panel on Climate Change.

Our future is carbon negative: a CCS roadmap for Romania, G.C., Institute, Editor. 2012, Bellona Foundation.

Institute, G.C., 2014. The future of carbon capture will focus on cost reduction. Available from: https://www.globalccsinstitute.com/insights/authors/RonMunson/2014/11/05/future-carbon-capture-will-focus-cost-reduction.

Jönsson, 2012, Analysing the potential for implementation of CCS within the European pulp and paper industry, Energy, 44, 641, 10.1016/j.energy.2012.05.028

Jamasb, 2008, Learning Curves for Energy Technology: A Critical Assessment in Delivering a Low Carbon Electricity System: Technologies, Economics and Policy

Kjärstad, 2011, Establishing an integrated CCS transport infrastructure in northern Europe?Challenges and possibilities, Energy Procedia, 4, 2417, 10.1016/j.egypro.2011.02.135

Kuramochi, 2012, Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes, Prog. Energy Combustion Sci., 38, 87, 10.1016/j.pecs.2011.05.001

Low Emissions Intensity Lime and Cement (LEILAC), 2017. Available from: https://www.project-leilac.eu/ [17/03/2017].

Möllersten, 2003, Potential and cost-effectiveness of CO2 reductions through energy measures in Swedish pulp and paper mills, Energy, 28, 691, 10.1016/S0360-5442(03)00002-1

Möllersten, 2004, Efficient energy systems with CO2 capture and storage from renewable biomass in pulp and paper mills, Renew. Energy, 29, 1583, 10.1016/j.renene.2004.01.003

McGrail, 2012, Overcoming business model uncertainty in a carbon dioxide capture and sequestration project: case study at the Boise White Paper Mill, Int. J. Greenhouse Gas Control, 9, 91, 10.1016/j.ijggc.2012.03.009

Melien, 2009, Economics in carbon dioxide capture for storage in deep geologic formation, Vol. 3

Melien, 2005, Economic and cost analysis for CO2 capture costs in the CO2 capture project scenarios, 47

Mesfun, 2013, Optimization of process integration in a Kraft pulp and paper mill −Evaporation train and CHP system, Appl. Energy, 107, 98, 10.1016/j.apenergy.2013.02.016

High-purity CO2 sources, in CCS Roadmap for Industries, U.N.I.D., Organisation, Editor. 2010, Carbon Counts.

Pettersson, 2012, Comparison of black liquor gasification with other pulping biorefinery concepts—Systems analysis of economic performance and CO2 emissions, Energy, 37, 136, 10.1016/j.energy.2011.10.020

Project Costs – Industrial Applications – QUEST. in CCS Cost Network—2016 Workshop. 2016. Cambridge, Massachusetts, USA, IEAGHG.

Rodriguez, 2012, CO2 capture from cement plants using oxyfired precalcination and/or calcium looping, Environ. Sci. Technol., 46, 2460, 10.1021/es2030593

Romeo, 2011, Reduction of greenhouse gas emissions by integration of cement plants: power plants and CO2 capture systems, Greenhouse Gases Sci. Technol., 1, 72, 10.1002/ghg3.5

Rubin, 2007, Use of experience curves to estimate the future cost of power plants with CO2 capture, Int. J. Greenhouse Gas Control, 1, 188, 10.1016/S1750-5836(07)00016-3

Said, 2013, Production of precipitated calcium carbonate (PCC) from steelmaking slag for fixation of CO2, Appl. Energy, 112, 765, 10.1016/j.apenergy.2012.12.042

Steelmaking, U.L.C.d. Ultra Low Carbon dioxide Steelmaking: Consortium Overview. 2015 [cited 2015 29-07-15]; Available from: http://www.ulcos.org/en/about_ulcos/home.php.

Stolaroff, 2005, Using CaO- and MgO-rich industrial waste streams for carbon sequestration, Energy Conversion Manag., 46, 687, 10.1016/j.enconman.2004.05.009

2017, OPEC Monthly Oil Market Report January 2017

Technical Report TR-ECRA-119/2012 – ECRA C.C.S. Project – Report on I.I.I. Phase 2012 European Cement Research Academy.

Technology, N.U.o.S.a., 2011. Chemical Engineering Plant Cost Index (averaged over year).

The Stepwise SEWGS Project 2017, Available from: http://www.stepwise.eu/home/ [17/03/2017].

Tsupari, 2013, Post-combustion capture of CO2 at an integrated steel mill—Part II: economic feasibility, Int. J. Greenhouse Gas Control, 16, 278, 10.1016/j.ijggc.2012.08.017

Vatopoulos, 2012, Assessment of CO2 capture technologies in cement manufacturing process, J. Cleaner Prod., 32, 251, 10.1016/j.jclepro.2012.03.013

Wiley, 2011, Assessment of opportunities for CO2 capture at iron and steel mills: an Australian perspective, Energy Procedia, 4, 2654, 10.1016/j.egypro.2011.02.165

Xu, 2010, A brief overview of low CO2 emission technologies for iron and steel making, J. Iron Steel Res. Int., 17, 1, 10.1016/S1006-706X(10)60064-7

Zheng, 2016, Phase evolution, characterisation, and performance of cement prepared in an oxy-fuel atmosphere, Faraday Discuss., 10.1039/C6FD00032K

van Straelen, 2010, CO2 capture for refineries: a practical approach, Int. J. Greenhouse Gas Control, 4, 316, 10.1016/j.ijggc.2009.09.022

van der Stel, 2008, Developments and evaluation of the ULCOS Blast furnace process at LKAB Experimental BF in Luleå