A Simple Design of Polarization Reconfigurable Fabry-Perot Resonator Antenna
Tóm tắt
This paper presents a simple design of high gain Fabry-Perot (FP) antenna with polarization diversity. The proposed antenna is composed of a reconfigurable microstrip patch, a partially reflective surface, and a planar metallic reflector. By electrically controlling the ON/OFF states of two p-i-n diodes, the polarization of the antenna can be switched among dual-sense circular polarization and single linear polarization. Notably, the biasing wires, which are generally used in designing reconfigurable antennas, are not necessary in the proposed design. Thus, the undesirable effects of the biasing wires on the antenna's operating characteristics can be eliminated. An antenna prototype, whose overall dimensions are 2.0λ×2.0λ×0.6λ at the center operating frequency, is fabricated and measured to validate the design concept. The measured overlapped bandwidth for -10 dB |S11| and 3-dB AR bandwidths of all polarization states is 4% (7.3-7.6 GHz). The desired radiation patterns are also observed with a peak gain of 15.1 dBi.
Từ khóa
#Fabry-Perot #high gain #polarization reconfigurable #PRSTài liệu tham khảo
10.1109/ACCESS.2017.2766231
10.1109/TAP.2017.2766439
10.1049/el.2018.5244
10.1109/LAWP.2017.2786945
10.1002/mop.31608
10.1109/ACCESS.2019.2915628
10.1049/iet-map.2017.0864
10.1109/TAP.1956.1144455
10.1002/mmce.22070
10.1109/LAWP.2018.2802439
10.1109/LAWP.2016.2598248
10.1016/j.aeue.2017.05.015
bharathi, 2017, A novel single feed frequency and polarization reconfigurable microstrip patch antenna, AEU-Int J Electron Commun, 72, 8, 10.1016/j.aeue.2016.11.012
10.1109/TAP.2019.2902750
10.1016/j.aeue.2018.08.001
han, 2015, Polarization reconfigurable microstrip patch antenna, Microw Opt Technol Lett, 57, 1494, 10.1002/mop.29120
10.1109/JPROC.2012.2188249
10.1109/LAWP.2006.889552
10.1109/LAWP.2018.2864797
10.1109/TAP.2019.2893213
10.1109/TAP.2016.2593716
10.1109/LAWP.2017.2777502
2020, MADP-042305-130600 Surmount PIN Diode Datasheet