A Sensor Network to Monitor Process Parameters of Fermentation and Drying in Black Tea Production

MAPAN - Tập 30 - Trang 211-219 - 2015
Debashis Saikia1, P. K. Boruah1, Utpal Sarma1
1Department of Instrumentation and USIC, Gauhati University, Guwahati, India

Tóm tắt

Fermentation and drying process in tea production are two important processes which play a crucial role in producing good quality tea. Tea colour and flavour are formed in the fermentation and enzyme reactions are terminated and moisture contents are reduced from the leaf particles in the drying process. Ambient temperature and relative humidity (RH) are two major factors for the fermentation process. Firing temperature of dryer is also responsible for the final quality of tea. This paper presents an instrument comprising of sensor network to monitor temperature and RH for the fermentation process and firing temperature of the dryer. For dryer temperature monitoring a thermocouple based measuring system is developed. For fermentation an RH to voltage converter and temperature to voltage converter type sensor is used to develop the RH and temperature monitoring sensor node. The sensor nodes for different stages are connected in RS 485 network. Data are logged into the hard drive of a personal computer using the developed data acquisition software. The instrument will be helpful for recording these parameters and so that their influence can be determined and final quality can be improved.

Tài liệu tham khảo

Tea statistics at http://assamgovt.nic.in/business/business_entrprise.asp. Accessed 12 June 2014. U. Sarma, Study and development of smart sensor using microprocessor and microcontroller, PhD thesis. Gauhati University, December, 2009. S.L. Sarnot, Need of electronic instrumentation in Tea industries, Technical report. B. Tudu, B. Kow, N. Bhattacharyya and R. Bandyopadhyay, Normalization techniques for gas sensor array as applied to classification for black tea, Int. J. Smart Sens. Intell. Syst., 2 (2009) 176–189. N. Bhattacharyya, S. Seth, B. Tudu, P. Tamuly, A. Jana, D. Ghosh, R. Bandyopadhyay, M. Bhuyan and S. Sabhapandit, Detection of optimum fermentation time for black tea manufacturing using electronic nose, Sens. Actuators B, 122 (2007) 627–634. J.L. Gonzalez, P. Coggon and G.W. Sanderson, Biochemistry of tea fermentation: formation of t-2 hexenal from linolenic acid, J. Food Sci., 37 (1972) 797–798. H. Co and G.W. Sanderson, Biochemistry of tea fermentation: Conversion of amino acids to black tea aroma constituents, J. Food Sci., 35 (1970) 160–164. M.A. Dix, C.J. Fairly, D.J. Millen and D. Swame, Fermentation of tea in aqueous suspension influence of tea peroxidase, J. Sci. Food Agric., 52 (1981) 920–932. N. Bhattacharyya, S. Seth, B. Tudu, P. Tamuly, A. Jana, D. Ghosh, R. Bandyopadhyay and M. Bhuyan, Monitoring of black tea fermentation process using electronic nose, J. Food Eng., 80 (2007) 1146–1156. http://www.tocklai.net/activities/tea-manufacture/drying/. Accessed 25 Nov, 2014. S.J. Temple, C.M. Temple, A.J.B. van Boxtel and M.N. Clifford, The effect of drying on black tea quality, J. Sci. Food Agric., 81 (2001) 764–772 . T. Samanta, V. Cheeni, S. Das, A.B. Roy, B.C. Ghosh and A. Mitra, Assessing biochemical changes during standardization of fermentation time and temperature for manufacturing quality black tea, J. Food Sci. Technol. doi:10.1007/s13197-013-1230-5. P.V. Sujith Kumar, S. Basheer, R. Ravi and M.S. Thakur, Comparative assessment of tea quality by various analytical and sensory methods with emphasis on tea polyphenols, J. Food Sci. Technol., 48 (2011) 440–446. doi:10.1007/s13197-010-0178-y. U. Sarma, P.K. Boruah, Design and development of a relative humidity and room temperature measurement system with on line data logging feature for monitoring the fermentation room of tea factory, Sens. Transducers J., 135 (2011) 126–133. U. Sarma and P.K. Boruah, Design and characterisation of a temperature compensated relative humidity measurement system with on line data logging feature, MAPAN-J. Metrol. Soc. India, 29 (2014) 77–85. doi:10.1007/s12647-013-0069-6. U. Sarma, D. Chakraborty and P.K. Boruah, Design of a low cost smart dryer temperature measurement system for tea factories, Sens. Transducers J., 108 (2009) 8–14. U. Sarma and P.K. Boruah, Design and development of a high precision thermocouple based smart industrial thermometer with on line linearization and data logging feature, Measurement, 43 (2010)1589–1594. M. Moghavvemi, K.E. Ng, C.Y. Soo and S.Y. Tan, A reliable and economically feasible remote sensing system for temperature and relative humidity measurement, Sens. Actuators A, 117 (2005) 181–185. D. Saikia, P.K. Boruah and U. Sarma, Development and implementation of A sensor network to monitor fermentation process parameter in tea processing, Int. J. Smart Sens. Intell. Syst., 7 (2014) 1254–1270. Datasheet of AD595 at http://www.analog.com/static/imported-files/data_sheets/AD594_595.pdf. Accessed 25 Nov 2014. Datasheet of PIC18F452 at http://ww1.microchip.com/downloads/en/DeviceDoc/39564c.pdf. Accessed 25 Nov 2014. The RS 485 design guide, application report at http://www.ti.com/lit/an/slla272b/slla272b.pdf. Accessed 25 Nov 2014. NIST datasheet at http://srdata.nist.gov/its90/download/type_k.tab. Accessed 25 Nov 2014. Datasheet of HIH4000 at http://sensing.honeywell.com/honeywell-sensing-hih4000%20series-product-sheet-009017-5-en.pdf. Accessed 25 Nov 2014. Datasheet of LM 35 at www.ti.com/lit/ds/symlink/lm35.pdf. Accessed 25 Nov 2014. D. Saikia, U. Sarma and P.K. Boruah, Development of an online heat index measurement system for thermal comfort determination, MAPAN-J. Metrol. Soc. India, 29 (2014) 67–72. doi:10.1007/s12647-013-0066-9. Datasheet of MAX 485 at http://datasheets.maximintegrated.com/en/ds/MAX1487-MAX491.pdf. Accessed 25 Nov 2014. L. Greenspam, Humidity fixed points of binary saturated aqueous solutions, J. Res. Natl. Bur. Stand-A, 81A (1977) 89–96. OIML, The scale of relative humidity of air certified against salt solutions, Organ. Int. Metrol. Legale OIML R, 121 (1996). ISO, Guide to the expression of uncertainty in measurement, International Organization for Standardization, Geneva (1993). A.N. Johnson, C.J. Crowley and T.T. Yeh, Uncertainty analysis of NIST’s 20 liter hydrocarbon liquid flow standard, MAPAN-J. Metrol. Soc. India, 26 (2011) 187–202. B. Singh, H. Kishan and Y.P. Singh, Calibration of special relative humidity and temperature (RHT) sensors and evaluation and expression of uncertainty in the measurement, MAPAN-J. Metrol. Soc. India, 23 (2008) 115–121. http://www.iso.org/sites/JCGM/GUM/JCGM100/C045315e-html/C045315e_FILES/MAIN_C045315e/04_e.html. Accessed 29 April 2015. http://physics.nist.gov/cuu/Uncertainty/typea.html. Accessed 29 April 2015. https://www.nde-ed.org/GeneralResources/ErrorAnalysis/UncertaintyTerms.htm. Accessed 29 April 2015.