A Review of the Roles of Digital Twin in CPS-based Production Systems

J. Lee, B. Bagheri, H. Kao, A Cyber-Physical Systems architecture for Industry 4 . 0-based manufacturing systems, Manuf. Lett. 3 (2015) 18-23. doi:10.1016/j.mfglet.2014.12.001.

Ashton, 2009, That’ Internet of Things’ Thing, RFiD J., 22, 97

S. Sarma, D.L. Brock, K. Ashton, The Networked Physical World, 2000.

Brettel, 2014, How Virtualization, Decentralization and Network Building Change the Manufacturing Landscape: An Industry 4.0 Perspective, Int. J. Mech. Aerospace, Ind. Mechatronics Eng., 8, 37

N. Jazdi, Cyber Physical Systems in the Context of Industry 4.0, in: Autom. Qual. Testing, Robot. 2014 IEEE Int. Conf., 2014: pp. 1-4. doi:10.1109/AQTR. 2014.6857843.

R. Baheti, H. Gill, Cyber-physical Systems, in: T. Samad, A. Annaswamy (Eds.), Impact Control Technol., IEEE Control Systems Society, 2011: pp. 161-166.

M. Garetti, L. Fumagalli, E. Negri, Role of Ontologies for CPS Implementation in Manufacturing, MPER - Manag. Prod. Eng. Rev. 6 (2015) 26-32. doi:10.1515/mper-2015-0033.

E. Negri, L. Fumagalli, M. Garetti, L. Tanca, Requirements and languages for the semantic representation of manufacturing systems, Comput. Ind. 81 (2016) 55-66. doi:http://dx.doi.org/10.1016/j.compind.2015.10.009.

T. Gruber, Toward principles for the design of ontologies used for knowledge sharing, Int. J. Hum. Comput. Stud. 43 (1995) 907-928. http://www.sciencedirect.com/science/article/pii/S1071581985710816 (accessed September 29, 2014).

C. Legat, C. Seitz, S. Lamparter, S. Feldmann, Semantics to the Shop Floor: Towards Ontology Modularization and Reuse in the Automation Domain, in: Proc. 19th IFAC World Congr., 2014: pp. 3444-3449. http://www.researchgate.net/publication/261361140_Semantics_to_the_Shop_Floor_Towards_Ontology_Modularization_and_Reuse_in_the_Automation_Domain.

S. Borgo, An ontological approach for reliable data integration in the industrial domain, Comput. Ind. 65 (2014) 1242-1252. doi:10.1016/j.compind.2013.12.010.

S. Heymans, L. Ma, D. Anicic, Z. Ma, N. Steinmetz, Y. Pan, J. Mei, A. Fokoue, A. Kalyanpur, A. Kerschenbaum, E. Schonberg, K. Srinivas, C. Feier, G. Hench, B. Wetzstein, U. Keller, ONTOLOGY REASONING WITH LARGE DATA REPOSITORY, in: Ontol. Manag., Springer US, 2008: pp. 89-128.

J. Davis, T. Edgar, J. Porter, J. Bernaden, M. Sarli, Smart manufacturing, manufacturing intelligence and demand-dynamic performance, Comput. Chem. Eng. 47 (2012) 145-156. doi:10.1016/j.compchemeng.2012.06.037.

J. Lee, H. Kao, S. Yang, Service innovation and smart analytics for Industry 4.0 and big data environment, in: Procedia CIRP, Elsevier B.V., 2014: pp. 3-8. doi:10.1016/j.procir.2014.02.001.

Jasperneite, 2012, Was hinter Begriffen wie Industrie 4.0 steckt, Internet Und Autom., 12, 12

M. Shafto, M. Conroy, R. Doyle, E. Glaessgen, C. Kemp, J. LeMoigne, L. Wang, DRAFT Modeling, Simulation, Information Technology & Processing Roadmap. Technology Area 11, 2010.

M. Shafto, M. Conroy, R. Doyle, E. Glaessgen, C. Kemp, J. LeMoigne, L. Wang, Modeling, Simulation, Information Technology & Processing Roadmap. Technology Area 11, 2012.

E.H. Glaessgen, D.S. Stargel, The Digital Twin Paradigm for Future NASA and U. S. Air Force Vehicles, in: 53rd AIAA/ASME/ASCE/AHS/ASC Struct. Struct. Dyn. Mater. Conf., 2012: p. 1818. doi:10.2514/6.2012-1818.

E.J. Tuegel, The Airframe Digital Twin: Some Challenges to Realization, in: 53rd AIAA/ASME/ASCE/AHS/ASC Struct. Struct. Dyn. Mater. Conf., 2012: p. 1812. doi:10.2514/6.2012-1812.

B.T. Gockel, A.W. Tudor, M.D. Brandyberry, R.C. Penmetsa, E.J. Tuegel, Challenges with Structural Life Forecasting using Realistic Mission Profiles, in: 53rd AIAA/ASME/ASCE/AHS/ASC Struct. Struct. Dyn. Mater. Conf., 2012: p. 1813. doi:10.2514/6.2012-1813.

K. Reifsnider, P. Majumdar, Multiphysics Stimulated Simulation Digital Twin Methods for Fleet Management, in: 54th AIAA/ASME/ASCE/AHS/ASC Struct. Struct. Dyn. Mater. Conf., 2013: p. 1578. doi:10.2514/6.2013-1578.

J. Ríos, J.C. Hernandez, M. Oliva, F. Mas, Product Avatar as Digital Counterpart of a Physical Individual Product: Literature Review and Implications in an Aircraft, in: ISPE CE, 2015: pp. 657-666.

J. Lee, E. Lapira, B. Bagheri, H. an Kao, Recent advances and trends in predictive manufacturing systems in big data environment, Manuf. Lett. 1 (2013) 38-41. doi:10.1016/j.mfglet.2013.09.005.

P. Majumdar, M. FasalHaider, K. Reifsnider, Multi-physics Response of Structural Composites and Framework for Modeling Using Material Geometry, in: 54th AIAA/ASME/ASCE/AHS/ASC Struct. Struct. Dyn. Mater. Conf., 2013: p. 1577. doi:10.2514/6.2013-1577.

R. Rosen, G. Von Wichert, G. Lo, K.D. Bettenhausen, About The Importance of Autonomy and Digital Twins for the Future of Manufacturing, in: IFAC-PapersOnLine, Elsevier Ltd., 2015: pp. 567-572. doi:10.1016/j.ifacol.2015.06.141.

B. Bielefeldt, J. Hochhalter, D. Hartl, Computationally Efficient Analysis of SMA Sensory Particles Embedded in Complex Aerostructures Using a Substructure Approach, in: ASME Proc. - Mech. Behav. Act. Mater., 2015: pp. V001T02A007-10 pp.

Y. Bazilevs, X. Deng, A. Korobenko, F. Lanza di Scalea, M.D. Todd, S.G. Taylor, Isogeometric Fatigue Damage Prediction in Large-Scale Composite Structures Driven by Dynamic Sensor Data, J. Appl. Mech. 82 (2015) 1-12. doi:10.1115/1.4030795.

M. Schluse, J. Rossmann, From Simulation to Experimentable Digital Twins, in: Syst. Eng. (ISSE), 2016 IEEE Int. Symp., 2016: pp. 1-6.

A. Canedo, Industrial IoT Lifecycle via Digital Twins, in: Proc. Elev. IEEE/ACM/IFIP Int. Conf. Hardware/Software Codesign Syst. Synth., 2016: p. 29.

T. Gabor, L. Belzner, M. Kiermeier, M.T. Beck, A. Neitz, A Simulation-Based Architecture for Smart Cyber-Physical Systems, in: Auton. Comput. (ICAC), 2016 IEEE Int. Conf., 2016: pp. 374-379. doi:10.1109/ICAC. 2016.29.

G.N. Schroeder, C. Steinmetz, C.E. Pereira, E.D. B., Digital Twin Data Modeling with AutomationML and a Communication Methodology for Data Exchange, in: IFAC-PapersOnLine, Elsevier B.V., 2016: pp. 12-17. doi:10.1016/j.ifacol.2016.11.115.

E.M. Kraft, The US Air Force Digital Thread/Digital Twin – Life Cycle Integration and Use of Computational and Experimental Knowledge II . The Evolution of Integrated Computational/Experimental Fluid Dynamics, in: 54th AIAA Aerosp. Sci. Meet., 2016: pp. 1-22. doi:10.2514/6.2016-0897.

M. Bajaj, D. Zwemer, B. Cole, Architecture to Geometry – Integrating System Models with, in: AIAA Sp. Forum, 2016: pp. 1-19. doi:10.2514/6.2016-5470.

M. Sacco, P. Pedrazzoli, W. Terkaj, VFF: Virtual Factory Framework, in: Technol. Manag. Conf. (ICE), 2010 IEEE Int., 2010: pp. 1-8.

W. Terkaj, M. Urgo, Ontology-based Modeling of Production Systems for Design and Performance Evaluation, in: Ind. Informatics (INDIN), 2014 12th IEEE Int. Conf., 2014: pp. 748-753.

M. Garetti, L. Fumagalli, Role of ontologies in open automation of manufacturing systems, in: Proc. XVII Summer Sch. Ind. Mech. Plants - 12/9/2012-14/9/2012, Venice, Italy, 2012.

E. Negri, L. Fumagalli, M. Macchi, M. Garetti, Ontology for Service-Based Control of Production Systems, in: APMS 2015, Part II, IFIP AICT 460, 2015: pp. 484-492. http://www.springerlink.com/index/10.1007/978-1-4020-9783-6.

L. Fumagalli, S. Pala, M. Garetti, E. Negri, Ontology-based modeling of manufacturing and logistics systems for a new MES architecture, in: APMS 2014, IFIP Adv. Inf. Commun. Technol. 438 (PART I), 2014: pp. 192-200.

A. Cerrone, J. Hochhalter, G. Heber, A. Ingraffea, On the Effects of Modeling As-Manufactured Geometry: Toward Digital Twin, Int. J. Aerosp. Eng. 2014 (2014) 1-10.

E. Fourgeau, E. Gomez, H. Adli, C. Fernandes, M. Hagege, System Engineering Workbench for Multi-views Systems Methodology with 3DEXPERIENCE Platform. The Aircraft RADAR Use Case, Complex Syst. Des. Manag. Asia. 426 (2016) 269-270. doi:10.1007/978.

J. Yang, W. Zhang, Y. Liu, Subcycle Fatigue Crack Growth Mechanism Investigation for Aluminum Alloys and Steel (Special Session on the Digital Twin), in: 54th AIAA/ASME/ASCE/AHS/ASC Struct. Struct. Dyn. Mater. Conf., 2013: p. 1499. doi:10.2514/6.2013-1499.

M. Grieves, J. Vickers, Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems, in: Transdiscipl. Perspect. Complex Syst., 2016: pp. 85-113. doi:10.1007/978.

M. Abramovici, J.C. Gobel, H.B. Dang, Semantic data management for the development and continuous reconfiguration of smart products and systems, CIRP Ann. - Manuf. Technol. 65 (2016) 185-188. doi:10.1016/j.cirp.2016.04.051.

G. Grinshpun, T. Cichon, D. Dipika, J. Roßmann, From Virtual Testbeds to Real Lightweight Robots: Development and deployment of control algorithms for soft robots, with particular reference to industrial peg-in-hole insertion tasks, in: ISR 2016 47st Int. Symp. Robot. Proc., 2016: pp. 208-214.

B.P. Smarslok, A.J. Culler, S. Mahadevan, Error Quantification and Confidence Assessment of Aerothermal Model Predictions for Hypersonic Aircraft, in: 53rd AIAA/ASME/ASCE/AHS/ASC Struct. Struct. Dyn. Mater. Conf., 2012: p. 1817. doi:10.2514/6.2012-1817.

J. Ríos, F.M. Morate, M. Oliva, J.C. Hernández, Framework to support the aircraft digital counterpart concept with an industrial design view, Int. J. Agil. Systsems Manag. 9 (2016) 212-231. doi:10.1504/IJASM. 2016.079934.

E.B. Arisoy, G. Ren, E. Ulu, N.G. Ulu, S. Musuvathy, A Data-Driven Approach to Predict Hand Positions for Two-Hand Grasps of Industrial Objects, in: ASME 2016 Int. Des. Eng. Tech. Conf. Comput. Inf. Eng. Conf., 2017: pp. V01AR02A067-11 pp. doi:10.1115/DETC2016.

H.-K. Wang, R. Haynes, H.-Z. Huang, L. Dong, S.N. Atluri, The Use of High-Performance Fatigue Mechanics and the Extended Kalman/Particle Filters, for Diagnostics and Prognostics of Aircraft Structures, C. Comput. Model. Eng. Sci. 105 (2015) 1-24.

P. Holzwarth, R. Tuegel, E. Kobryn, Airframe digital twin: An overview, in: Progn. Heal. Manag. Solut. Conf. MFPT 2012, 2012: p. 20.

M. Garetti, P. Rosa, S. Terzi, Life Cycle Simulation for the design of Product-Service Systems, Comput. Ind. 63 (2012) 361-369. doi:10.1016/j.compind.2012.02.007.

M. Garetti, M. Macchi, A. Pozzetti, L. Fumagalli, E. Negri, Synchro-push: a new production control paradigm, in: 21st Summer Sch. Fr. Turco 2016, 2016: pp. 150-155.