Tổng quan về nghiên cứu và tiến bộ ứng dụng gần đây trong các máy vít

United Nations Framework Convention on Climate Change (December, January 30). Report of the Conference of the Parties on its twenty-first session, held in Paris from 30 November to 13 December 2015. Proceedings of the United Nations Framework Convention on Climate Change, Paris, France.

European Parliament and Council of European Union (2012). Directive 2012/27/EU of the European Parliament and of the Council of 25 October 2012 on energy efficiency, amending Directives 2009/125/EC and 2010/30/EU and repealing Directives 2004/8/EC and 2006/32. Off. J. Eur. Union, 315, 1–56.

USA (2022, January 09). 10 CFR Part 431-Energy Efficiency Program for Certain Commercial and Industrial Equipment, Available online: https://www.ecfr.gov/current/title-10/chapter-II/subchapter-D/part-431.

China (2022, January 09). Law of the People’s Republic of China on Conserving Energy. Available online: http://www.hf.cas.cn/zncs/aqbmc/zcfg/aq/202103/P020210304347500715056.pdf.

Patel, 2019, A critical review of the experimental studies related to twin screw compressors, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 234, 157, 10.1177/0954408919869534

Wu, W., and Zhang, Z. Development of single screw compressor technologies and their tendency. Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng. 2021, in press.

Ziviani, 2018, Review and update on the geometry modeling of single-screw machines with emphasis on expanders, Int. J. Refrig., 92, 10, 10.1016/j.ijrefrig.2018.05.029

Wei, J., Hua, Q., Wang, J., Jiang, Z., Wang, J., and Yuan, L. (2020). Overview of the Development and Application of the Twin Screw Expander. Energies, 13.

Wu, 2014, Design of the Curved Flank for the Star-Wheel Tooth in Single Screw Compressors, J. Mech. Des., 136, 051006, 10.1115/1.4026870

Huang, 2014, An optimization of the star-wheel profile in a single screw compressor, Proc. Inst. Mech. Eng. Part A J. Power Energy, 229, 139, 10.1177/0957650914555423

Liu, 2018, A synergy-column envelope meshing pair profile for single screw compressors, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 233, 1383, 10.1177/0954406218771107

Wu, 2011, Simulation of the surface profile of the groove bottom enveloped by milling cutters in single screw compressors, Comput. Des., 43, 67

Wang, 2019, Geometric characteristics analysis for inner surface of working chamber in single screw compressor with multicolumn envelope meshing pair, Int. J. Refrig., 108, 347, 10.1016/j.ijrefrig.2019.08.029

Wang, 2018, Optimization study on multicolumn envelope meshing pair of single screw compressor based on leakage characteristics, Int. J. Refrig., 92, 113, 10.1016/j.ijrefrig.2018.05.032

Wang, 2020, Theoretical study on heat transfer characteristics of single screw refrigeration compressor with Multicolumn envelope meshing pair, Appl. Therm. Eng., 166, 114635, 10.1016/j.applthermaleng.2019.114635

Wang, 2018, Theoretical research and optimization analysis for the injection process of the single screw refrigeration compressor, Int. J. Refrig., 88, 91, 10.1016/j.ijrefrig.2017.12.003

Wang, 2016, Theoretical and experimental study on thermodynamic performance of single screw refrigeration compressor with Multicolumn Envelope Meshing Pair, Appl. Therm. Eng., 103, 139, 10.1016/j.applthermaleng.2016.04.071

Li, 2016, Hydrodynamic lubricating characteristics of water flooded single screw compressors based on two types of meshing pair profile, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., 230, 1092, 10.1177/1350650116629354

Li, 2016, Research of the hydrodynamic lubrication characteristics of different meshing pair profiles in water-flooded single screw compressors, Proc. Inst. Mech. Eng. Part A J. Power Energy, 230, 247, 10.1177/0957650915625135

Wang, 2019, Theoretical study on wear characteristics of single screw refrigeration compressor with multicolumn envelope meshing pair, Int. J. Refrig., 102, 1, 10.1016/j.ijrefrig.2019.03.004

Dhunput, 2019, Performance characteristics of a new generation of single screw compressor, Proceedings of the 11th International Conference on Compressors and their Systems, Volume 604, 011006

Peng, 2021, Dynamic characteristics improvement of the single screw compressor with odd-grooves screw rotor, Int. J. Refrig., 132, 100, 10.1016/j.ijrefrig.2021.09.005

Stosic, 2011, Geometry of screw compressor rotors and their tools, J. Zhejiang Univ. A, 12, 310, 10.1631/jzus.A1000393

Patil, 2021, Application of Path Homotopy in Twin Screw Compressor Rotor Profile Design, Proceedings of the 12th International Conference on Compressors and their Systems, Volume 1180, 012004

Yang, 2019, Solving the conjugate tooth profile of screw compressor rotors using edge detection method based on Alpha Shape algorithm, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 233, 1217, 10.1177/0954408919862718

Yang, 2019, Solving the screw compressor rotor-forming grinding wheel using the edge detection method based on the graphic method, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 233, 967, 10.1177/0954408918818281

Shen, 2020, Profile Design Method of Twin-Screw Compressor Rotors Based on the Pixel Solution, Math. Probl. Eng., 2020, 1

Abolhasani, H., Moghimi, M., and Ebrahimi, M. (2020). Twin Screw Expanders Profile Optimization Using Surrogate-Based Modelling 2020. J. Appl. Comp. Mech., 1–13.

2016, Integral Modeling of a Twin-Screw Compressor, J. Mech. Des., 138, 073401, 10.1115/1.4033694

Zhang, 2019, Research on structural parameter optimization and thermal performance of twin-screw expander, Int. J. Low-Carbon Technol., 14, 386, 10.1093/ijlct/ctz026

Hauser, 2011, Geometrical abstraction of screw compressors for thermodynamic optimization, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 225, 1399, 10.1177/0954406210395884

Ji, 2014, A RE-Based Double Measurement Method for Unknown Rotor Profile of Screw Compressor, Adv. Mech. Eng., 6, 715710, 10.1155/2014/715710

Rane, 2014, Deforming grid generation and CFD analysis of variable geometry screw compressors, Comput. Fluids, 99, 124, 10.1016/j.compfluid.2014.04.024

Utri, 2018, Comparison of thermodynamic efficiency between constant, dual and multiple lead rotors for an industrial air screw compressor, Proceedings of the International Conference on Screw Machines, Volume 425, 012025

Utri, M., and Brümmer, A. (2016, January 11–14). Improvement of the efficiency of twin-screw refrigeration compressors by means of dual lead rotors. Proceedings of the International Compressor Engineering Conference, Purdue University, West Lafayette, IN, USA.

Utri, M., and Brümmer, A. (2018). Opportunities for variable rotor lead in screw compressors depending on dimensionless numbers. Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 0954408918802716.

Wu, H., Liu, J., Shen, Y., Liang, M., and Zhang, B. (2021). Research on Performance of Variable-Lead Rotor Twin Screw Compressor. Energies, 14.

Denver, G. (2021, December 10). Positive Displacement Blowers & Vacuum Pumps CycloBlower®VHX Series. Available online: https://gdequipment.com/wp-content/uploads/2019/06/CycloBlower-VHX-Brochure.pdf.

Hoang, 2020, A general mathematical model for screw-rotor honing using an internal-meshing honing machine, Mech. Mach. Theory, 154, 104038, 10.1016/j.mechmachtheory.2020.104038

Wang, 2013, Experimental study on the performance of single screw expanders by gap adjustment, Energy, 62, 379, 10.1016/j.energy.2013.09.031

Lu, 2021, Performance Improvement of Single Screw Compressor by Meshing Clearance Adjustment Used in Refrigeration System, J. Therm. Sci., 30, 149, 10.1007/s11630-020-1291-5

Wu, 2013, A numerical method for the evaluation of the meshing clearance for twin screw rotors with discrete tooth profile points, Mech. Mach. Theory, 70, 62, 10.1016/j.mechmachtheory.2013.07.008

Buckney, 2016, Design and evaluation of rotor clearances for oil-injected screw compressors, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 231, 26, 10.1177/0954408916660342

Meng, 2021, Study of the thermo-mechanical couple deformation of the meshing pairs of a single-screw compressor, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 235, 1175, 10.1177/09544089211028775

Zhang, 2021, Numerical investigation of thermal deformation of meshing pairs in single screw compressor, Appl. Therm. Eng., 188, 116614, 10.1016/j.applthermaleng.2021.116614

Wang, 2021, Study on screw rotor thermal machining method of single screw compressor, Proceedings of the 12th International Conference on Compressors and their Systems, Volume 1180, 012011

Krichel, 2011, Dynamic modeling of compressors illustrated by an oil-flooded twin helical screw compressor, Mechatronics, 21, 77, 10.1016/j.mechatronics.2010.08.004

Liu, 2012, A new model of screw compressor for refrigeration system simulation, Int. J. Refrig., 35, 861, 10.1016/j.ijrefrig.2012.01.016

Giuffrida, 2016, A semi-empirical method for assessing the performance of an open-drive screw refrigeration compressor, Appl. Therm. Eng., 93, 813, 10.1016/j.applthermaleng.2015.10.023

Giuffrida, 2017, Improving the semi-empirical modelling of a single-screw expander for small organic Rankine cycles, Appl. Energy, 193, 356, 10.1016/j.apenergy.2017.02.015

Alonso, S., Pérez, D., Morán, A., Fuertes, J.J., Díaz, I., and Domínguez, M. (2019). A Deep Learning Approach for Fusing Sensor Data from Screw Compressors. Sensors, 19.

Tian, 2019, A method for COP prediction of an on-site screw chiller applied in cinema, Int. J. Refrig., 98, 459, 10.1016/j.ijrefrig.2018.10.020

Tian, 2021, A GA-LSSVM approach for predicting and controlling in screw chiller, Proc. Inst. Mech. Eng. Part A J. Power Energy, 235, 1649, 10.1177/0957650920983102

Ping, 2021, Prediction and optimization of power output of single screw expander in organic Rankine cycle (ORC) for diesel engine waste heat recovery, Appl. Therm. Eng., 182, 116048, 10.1016/j.applthermaleng.2020.116048

Wang, 2019, Analysis of the leakage in a water-lubricated twin-screw air compressor, Appl. Therm. Eng., 155, 217, 10.1016/j.applthermaleng.2019.04.001

Hsieh, 2011, Performance analysis of screw compressors—Numerical simulation and experimental verification, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 226, 968, 10.1177/0954406211417961

Tian, 2017, Modeling and performance analysis of twin-screw steam expander under fluctuating operating conditions in steam pipeline pressure energy recovery applications, Energy, 141, 692, 10.1016/j.energy.2017.09.128

Chamoun, 2013, Modelica-based modeling and simulation of a twin screw compressor for heat pump applications, Appl. Therm. Eng., 58, 479, 10.1016/j.applthermaleng.2013.04.020

Stosic, 2015, On heat transfer in screw compressors, Int. J. Heat Fluid Flow, 51, 285, 10.1016/j.ijheatfluidflow.2014.10.026

Shen, 2018, Theoretical and experimental analyses of the internal leakage in single-screw expanders, Int. J. Refrig., 86, 273, 10.1016/j.ijrefrig.2017.10.037

Liu, 2016, Analysis of performance of two-stage screw compressor under various operating conditions, Proc. Inst. Mech. Eng. Part A J. Power Energy, 230, 660, 10.1177/0957650916659578

Cao, 2011, Experimental analysis of pressure distribution in a twin screw compressor for multiphase duties, Exp. Therm. Fluid Sci., 35, 219, 10.1016/j.expthermflusci.2010.09.004

Papes, 2016, Development of a thermodynamic low order model for a twin screw expander with emphasis on pulsations in the inlet pipe, Appl. Therm. Eng., 103, 909, 10.1016/j.applthermaleng.2016.04.159

Bianchi, 2018, Numerical modeling of a two-phase twin-screw ex-pander for Trilateral Flash Cycle applications, Int. J. Refrig., 88, 248, 10.1016/j.ijrefrig.2018.02.001

Wang, 2015, Research of leakage characteristics of single screw refrigeration compressors with the Multicolumn Envelope Meshing Pair, Int. J. Refrig., 49, 1, 10.1016/j.ijrefrig.2014.09.005

Kameya, 2011, Coupled system simulator for air screw compressors and their drive systems, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 225, 13, 10.1177/09544089JPME384

Hsieh, 2011, Calculation of temperature distributions in the rotors of oil-injected screw compressors, Int. J. Therm. Sci., 50, 1271, 10.1016/j.ijthermalsci.2011.02.006

Tian, 2018, Optimization on shaft seals for a twin-screw steam compressor based on a novel uniform property region (UPR) model on discharge end-face, Int. J. Refrig., 91, 167, 10.1016/j.ijrefrig.2018.05.009

Chen, 2019, Investigation of characteristics of discharge pressure pulsation in a twin-screw refriger-ation compressor, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 233, 2206, 10.1177/0954406218779610

Rane, 2013, Grid deformation strategies for CFD analysis of screw compressors, Int. J. Refrig., 36, 1883, 10.1016/j.ijrefrig.2013.04.008

Rane, 2017, Algebraic generation of single domain computational grid for twin screw machines. Part I. Implementation, Adv. Eng. Softw., 107, 38, 10.1016/j.advengsoft.2017.02.003

Kovacevic, 2017, Algebraic generation of single domain computational grid for twin screw machines Part II—Validation, Adv. Eng. Softw., 109, 31, 10.1016/j.advengsoft.2017.03.001

Wu, H., Huang, H., Zhang, B., Xiong, B., and Lin, K. (2019). CFD Simulation and Experimental Study of Working Process of Screw Re-frigeration Compressor with R134a. Energies, 12.

Wu, 2020, Research on Effects of Vapor Injection on Twin-screw Compressor Performance, Int. J. Refrig., 118, 483, 10.1016/j.ijrefrig.2020.04.023

Xueming, 2015, The Three-Dimensional Numerical Simulation and Experimental Research on Screw Compressor, Adv. Mech. Eng., 7, 9, 10.1155/2014/189579

Byeon, S.-S., Lee, J.-Y., and Kim, Y.-J. (2017). Performance Characteristics of a 4 × 6 Oil-Free Twin-Screw Compressor. Energies, 10.

Kovacevic, A., Rane, S., Stosic, N., Jiang, Y., Lowry, S., and Furmanczyk, M. (2014, January 14–17). Influence of approaches in CFD solvers on performance prediction in screw compressors. Proceedings of the International Compressor Engineering Conference, West Lafayette, IN, USA.

Rane, 2021, Analysis of real gas equation of state for CFD modelling of twin screw expanders with R245fa, R290, R1336mzz(Z) and R1233zd(E), Int. J. Refrig., 121, 313, 10.1016/j.ijrefrig.2020.10.022

Basha, N., Kovacevic, A., and Rane, S. (2019). Analysis of Oil-Injected Twin-Screw Compressor with Multiphase Flow Models. Designs, 3.

Yang, 2021, CFD simulation for the internal pressure characteristics of an oil-injected twin-screw refrigeration compressor, Int. J. Refrig., 126, 143, 10.1016/j.ijrefrig.2021.01.020

Nouri, 2021, Application of LDV and PIV techniques for flow measurements in the suction port of a screw compressor, Proceedings of the 12th International Conference on Compressors and their Systems, Volume 1180, 012034

Nouri, 2020, Turbulent Flow Measurements near the Discharge Port of a Screw Compressor, Flow Turbul. Combust., 104, 927, 10.1007/s10494-019-00080-6

Casari, 2020, Investigation of flow characteristics in a single screw expander: A numerical approach, Energy, 213, 118730, 10.1016/j.energy.2020.118730

Liu, 2020, Numerical investigation of flow behavior and film thickness in the single screw expander, Int. J. Mech. Sci., 190, 106047, 10.1016/j.ijmecsci.2020.106047

Liu, 2021, Flow behavior and film thickness of gas-oil two-phase flow in the single screw expander, Int. J. Mech. Sci., 216, 106971, 10.1016/j.ijmecsci.2021.106971

Mujic, 2011, Noise generation and suppression in twin-screw compressors, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 225, 127, 10.1177/1464419311403875

Yang, 2019, Experimental study of lubricating oil impact on pressure pulsation for twin-screw refrigeration compressor, Int. J. Refrig., 112, 324, 10.1016/j.ijrefrig.2019.12.018

Wu, 2018, Performance investigation of a pressure pulsation dampener applied in the discharge chamber of a twin screw refrigeration compressor, Int. J. Refrig., 85, 70, 10.1016/j.ijrefrig.2017.09.012

He, 2020, Noise control of a two-stage screw refrigeration compressor, Appl. Acoust., 167, 107383, 10.1016/j.apacoust.2020.107383

He, 2021, Noise control of a twin-screw refrigeration compressor, Int. J. Refrig., 124, 30, 10.1016/j.ijrefrig.2020.12.008

Shen, 2021, Study on the noise reduction methods for a semi-hermetic variable frequency twin-screw refrigeration compressor, Int. J. Refrig., 125, 1, 10.1016/j.ijrefrig.2020.12.029

Fujiwara, 2011, Vibration analysis of oil-injected twin-screw compressors using simple simulated waveforms, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 225, 105, 10.1177/0954408911398330

Herrin, 2010, Improving screw compressor housing design using simulation, J. Acoust. Soc. Am., 127, 1833, 10.1121/1.3384270

Wu, 2016, Dynamic response prediction of a twin-screw compressor with gas-induced cyclic loads based on multi-body dynamics, Int. J. Refrig., 65, 111, 10.1016/j.ijrefrig.2015.12.002

Willie, 2017, Structural and torsional vibration and noise analysis of a dry screw compressor, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 231, 4, 10.1177/0954408916648989

Zhao, 2018, Vibration analysis and control of a screw compressor outlet piping system, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 233, 403, 10.1177/0954408918763561

Li, 2013, Experimental studies of the tooth wear resistance with different profiles in single screw compressor, Tribol. Int., 57, 210, 10.1016/j.triboint.2012.08.010

Wang, C., Xing, Z., Sun, S., Chen, W., and He, Z. (2021). Theoretical research on the wear characteristics of rotors in a twin-screw compressor. Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng.

Wang, 2018, Research on axis orbit of the journal bearing lubricated with oil and refrigerant mixtures in a twin-screw refrigeration compressor, Int. J. Refrig., 90, 1, 10.1016/j.ijrefrig.2018.04.008

Wang, 2018, Simulation of the characteristics of the water-lubricated journal bearing in twin-screw air compressor, Ind. Lubr. Tribol., 70, 1476, 10.1108/ILT-05-2017-0134

Xie, J., Peng, C., Zhang, W., Zhao, C., and Feng, Q. (2021). Experimental and Simulated Investigation of Lubrication Characteristics of a Water-Lubricated Bearing in a Single-Screw Compressor. Appl. Sci., 11.

Hou, 2017, Experimental study of the axial force on the rotors in a twin-screw refrigeration compressor, Int. J. Refrig., 75, 155, 10.1016/j.ijrefrig.2017.01.002

Wang, 2018, An optimal matching strategy for screw compressor for heat pump applications, Appl. Therm. Eng., 132, 333, 10.1016/j.applthermaleng.2017.12.104

Wu, Y., Zhi, R., Lei, B., Wang, W., Wang, J., Li, G., Wang, H., and Ma, C. (2016). Slide Valves for Single-Screw Expanders Working Under Varied Operating Conditions. Energies, 9.

Chen, 2011, Theoretical and experimental investigation on the performance of screw refrigeration compressor under part-load conditions, Int. J. Refrig., 34, 1141, 10.1016/j.ijrefrig.2011.01.020

Wang, 2014, Research on operating characteristics of single slide valve capacity control mechanism of the single screw refrigeration compressor, Proc. Inst. Mech. Eng. Part A J. Power Energy, 228, 965, 10.1177/0957650914547605

Wang, 2017, Research of thermal dynamic characteristics for variable load single screw refrigeration compressor with different capacity control mechanism, Appl. Therm. Eng., 110, 1172, 10.1016/j.applthermaleng.2016.08.189

Sun, 2021, Experimental investigation on twin screw refrigeration compressor with different capacity control methods, Int. J. Refrig., 130, 370, 10.1016/j.ijrefrig.2021.04.027

Xie, 2017, Research on the injected effect by the narrow-slit injection orifice in screw compressors, Proceedings of the 10th International Conference on Compressors and their Systems, Volume 232, 12019

2016, Influence of water and oil clearance flow on the operational behavior of screw expanders, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 231, 38

He, Z., Wang, T., Wang, X., Peng, X., and Xing, Z. (2018). Experimental Investigation into the Effect of Oil Injection on the Performance of a Variable Speed Twin-Screw Compressor. Energies, 11.

Li, 2019, The energy performance of a single-screw compressor for natural gas liquefaction process: Effects of the lubricating oil flow rate, Int. J. Energy Res., 43, 1494, 10.1002/er.4406

Yang, 2016, Experimental investigation of the water–injected process-gas screw compressor, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 232, 3, 10.1177/0954408916666573

Wang, 2018, Development of an oil free water-lubricated twin-screw air compressor, Appl. Therm. Eng., 143, 396, 10.1016/j.applthermaleng.2018.07.119

Dhayanandh, 2019, Influence of oil injection parameters on the performance of diesel powered screw air compressor for water well application, J. Meas., 152, 107323, 10.1016/j.measurement.2019.107323

Wu, 2017, Effects of lubricating oil on the performance of a semi-hermetic twin screw re-frigeration compressor, Appl. Therm. Eng., 112, 340, 10.1016/j.applthermaleng.2016.10.038

Basha, 2021, Numerical investigation of oil injection in screw compressors, Appl. Therm. Eng., 193, 116959, 10.1016/j.applthermaleng.2021.116959

Rudonja, 2012, Experimental evaluation of desuperheating and oil cooling process through liquid injection in two-staged ammonia refrigeration systems with screw compressors, Appl. Therm. Eng., 40, 210, 10.1016/j.applthermaleng.2012.02.023

Tian, 2017, Numerical investigation on mass and heat transfer in an ammonia oil-free twin-screw compressor with liquid injection, Int. J. Therm. Sci., 120, 175, 10.1016/j.ijthermalsci.2017.06.007

Wen, 2020, Performance optimization of a heat pump integrated with a single-screw refrigeration compressor with liquid refrigerant injection, Energy, 207, 118197, 10.1016/j.energy.2020.118197

Ous, 2012, Experimental investigation on water-injected twin-screw compressor for fuel cell humidification, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 226, 2925, 10.1177/0954406212438323

Wang, 2020, Experimental study on the performance of oil-free twin-screw expanders for recovering energy in fuel cell systems, Appl. Therm. Eng., 165, 114613, 10.1016/j.applthermaleng.2019.114613

Hütker, J., and Brummer, A. (2013, January 9–10). Physics of a dry running unsynchronized twin screw expander. Proceedings of the 8th International Conference on Compressors and their Systems, London, UK.

Wang, 2020, Loss analysis of oil-free twin-screw expanders for recovering energy in fuel cell systems by means of p-θ diagrams, Energy, 201, 117581, 10.1016/j.energy.2020.117581

He, 2018, Development and experimental investigation of an oil-free twin-screw air compressor for fuel cell systems, Appl. Therm. Eng., 145, 755, 10.1016/j.applthermaleng.2018.09.064

Li, T., Wang, Y., Mao, X., Chen, D., Huang, R., and Feng, Q. (2020). Development and Experimental Study of the First Stage in a Two-Stage Water-Flooded Single-Screw Compressor Unit for Polyethylene Terephthalate Bottle Blowing System. Energies, 13.

Wang, 2011, Preliminary experimental study of single screw expander prototype, Appl. Therm. Eng., 31, 3684, 10.1016/j.applthermaleng.2011.01.019

He, 2013, Influence of intake pressure on the performance of single screw expander working with compressed air, Appl. Therm. Eng., 51, 662, 10.1016/j.applthermaleng.2012.10.013

Zhang, 2014, Experimental Study on the Influence of Rotational Speed on the Performance of a Single-screw Expander with a 175 mm Screw Diameter, Int. J. Green Energy, 12, 257, 10.1080/15435075.2014.891514

Li, 2018, Influence of inlet pressure and rotational speed on the per-formance of high pressure single screw expander prototype, Energy, 147, 279, 10.1016/j.energy.2018.01.034

Zhi, 2021, Experimental study of single screw expander with different oil-gas separators in compressed air powered system, Energy, 235, 121371, 10.1016/j.energy.2021.121371

Wang, 2021, Experimental study on the influence of inlet and exhaust pressure loss on the performance of single screw expanders, Energy, 232, 120912, 10.1016/j.energy.2021.120912

Zhao, 2016, Theoretical and experimental investigation of a novel high temperature heat pump system for recovering heat from refrigeration system, Appl. Therm. Eng., 107, 758, 10.1016/j.applthermaleng.2016.07.047

Zhao, 2016, Performance analysis of a refrigerant extracting twin screw compressor employed in multi-temperature heat pump systems, Int. J. Refrig., 67, 383, 10.1016/j.ijrefrig.2016.04.015

Wu, 2016, Performance evaluation of a capacity-regulated high temperature heat pump for waste heat recovery in dyeing industry, Appl. Therm. Eng., 93, 1193, 10.1016/j.applthermaleng.2015.10.075

Wang, 2021, Development and experimental study of a high-efficiency helium twin-screw compressor, J. Cryog., 116, 103286, 10.1016/j.cryogenics.2021.103286

Tang, 2015, Performance study of a twin-screw expander used in a geothermal organic Rankine cycle power generator, Energy, 90, 631, 10.1016/j.energy.2015.07.093

Nikolov, A., and Brümmer, A. (2017). Investigating a Small Oil-Flooded Twin-Screw Expander for Waste-Heat Utilisation in Organic Rankine Cycle Systems. Energies, 10.

Shen, 2018, A study of clearance height on the performance of sin-gle-screw expanders in small-scale organic Rankine cycles, Energy, 153, 45, 10.1016/j.energy.2018.02.004

Ziviani, 2017, Optimizing the per-formance of small-scale organic Rankine cycle that utilizes a single-screw expander, Appl. Energy, 189, 416, 10.1016/j.apenergy.2016.12.070

Zhang, X., Zhang, Y., Cao, M., Wang, J., Wu, Y., and Ma, C. (2019). Working Fluid Selection for Organic Rankine Cycle Using Single-Screw Expander. Energies, 12.

Xia, 2015, Experimental study on the performance of sin-gle-screw expander with different inlet vapor dryness, Appl. Therm. Eng., 87, 34, 10.1016/j.applthermaleng.2015.05.006

Wang, 2020, Experimental Study on Heat Loss of a Single Screw Expander for an Organic Rankine Cycle System, Front. Energy Res., 8, 8, 10.3389/fenrg.2020.587726

Wang, 2020, Numerical study of heat transfer influence on the performance of a single screw expander for Organic Rankine Cycle, Energy, 193, 116683, 10.1016/j.energy.2019.116683

Papes, 2015, New insights in twin screw expander performance for small scale ORC systems from 3D CFD analysis, Appl. Therm. Eng., 91, 535, 10.1016/j.applthermaleng.2015.08.034

Guo, 2020, Numerical optimization of intake and exhaust structure and experimental verification on single-screw expander for small-scale ORC applications, Energy, 199, 117478, 10.1016/j.energy.2020.117478

Ziviani, 2016, Characterizing the performance of a single-screw expander in a small-scale organic Rankine cycle for waste heat recovery, Appl. Energy, 181, 155, 10.1016/j.apenergy.2016.08.048

Dawo, 2021, Experimental investigation, model validation and application of twin-screw expanders with different built-in volume ratios, Appl. Energy, 282, 116139, 10.1016/j.apenergy.2020.116139

Bianchi, 2020, Modelling and off-design performance optimisation of a trilateral flash cycle system using two-phase twin-screw expanders with variable built-in volume ratio, Appl. Therm. Eng., 179, 115671, 10.1016/j.applthermaleng.2020.115671

Wu, 2019, Internal volume ratio optimization and performance analysis for single-screw expander in small-scale middle temperature ORC system, Energy, 186, 115799, 10.1016/j.energy.2019.07.129

Lei, 2021, A study on the single screw expander with exhaust kinetic energy utilization in organic Rankine cycle conditions, Energy Convers. Manag., 245, 114641, 10.1016/j.enconman.2021.114641

Zhang, 2014, Development and experimental study on organic Rankine cycle system with single-screw expander for waste heat recovery from exhaust of diesel engine, Energy, 77, 499, 10.1016/j.energy.2014.09.034

Dong, 2021, Investigation on improvement potential of ORC system off-design performance by expander speed regulation based on theoretical and experimental exergy-energy analyses, Energy, 220, 119753, 10.1016/j.energy.2021.119753

Eyerer, 2019, Experimental and numerical investigation of direct liquid injection into an ORC twin-screw expander, Energy, 178, 867, 10.1016/j.energy.2019.04.172

Pantaleo, 2019, Thermoeconomic optimisation of small-scale organic Rankine cycle systems based on screw vs. piston expander maps in waste heat recovery applications, Energy Convers. Manag., 200, 112053, 10.1016/j.enconman.2019.112053

Zhao, 2018, Experimental study on the net efficiency of an Organic Rankine Cycle with single screw expander in different seasons, Energy, 165, 769, 10.1016/j.energy.2018.09.013

Lei, 2016, Development and experimental study on a single screw expander integrated into an Organic Rankine Cycle, Energy, 116, 43, 10.1016/j.energy.2016.09.089

Hsieh, 2017, Design and preliminary results of a 20-kW transcritical organic Rankine cycle with a screw expander for low-grade waste heat recovery, Appl. Therm. Eng., 110, 1120, 10.1016/j.applthermaleng.2016.09.047

Avadhanula, 2014, Empirical Models for a Screw Expander Based on Experimental Data From Organic Rankine Cycle System Testing, J. Eng. Gas Turbines Power, 136, 062601, 10.1115/1.4026303

Shen, 2014, Analysis of a single-effect mechanical vapor compression desalination system using water injected twin screw compressors, Desalination, 333, 146, 10.1016/j.desal.2013.10.014

Tian, 2017, Modeling and performance study of a water-injected twin-screw water vapor compressor, Int. J. Refrig., 83, 75, 10.1016/j.ijrefrig.2017.04.008

Shen, 2016, Development of a water-injected twin-screw compressor for mechanical vapor compression desalination systems, Appl. Therm. Eng., 95, 125, 10.1016/j.applthermaleng.2015.11.057

Shen, 2019, Theoretical study of two-stage water vapor compression systems, Appl. Therm. Eng., 147, 972, 10.1016/j.applthermaleng.2018.11.012

Yang, 2016, Study on mechanical vapor recompression system with wet compression single screw compressor, Appl. Therm. Eng., 103, 205, 10.1016/j.applthermaleng.2016.04.053

Diao, 2018, Development and application of screw expander in natural gas pressure energy recovery at city gas station, Appl. Therm. Eng., 142, 665, 10.1016/j.applthermaleng.2018.07.018

Yao, 2019, Performance research on a power generation system using twin-screw expanders for energy recovery at natural gas pressure reduction stations under off-design conditions, Appl. Energy, 236, 1218, 10.1016/j.apenergy.2018.12.039

Abolhasani, 2020, Power Recovery in a Gas Pressure Reduction Station using 3D CFD Modeling of a Twin Screw Expander, J. Appl. Fluid Mech., 13, 1179, 10.36884/jafm.13.04.30947

Li, 2018, Performance study on a single-screw compressor for a portable natural gas liquefaction process, Energy, 148, 1032, 10.1016/j.energy.2018.02.003

Almasi, 2011, Oil-flooded screw compressor for coal seam gas applications, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 226, 250, 10.1177/0954408911406056

Iodice, 2019, Modeling and energetic-exergetic evaluation of a novel screw expander-based direct steam generation solar system, Appl. Therm. Eng., 155, 82, 10.1016/j.applthermaleng.2019.03.151

Iodice, 2020, Energy performance and numerical optimization of a screw expander–based solar thermal electricity system in a wide range of fluctuating operating conditions, Int. J. Energy Res., 44, 1858, 10.1002/er.5037

Iodice, 2020, Direct steam generation solar systems with screw expanders and parabolic trough collectors: Energetic assessment at part-load operating conditions, Case Stud. Therm. Eng., 19, 100611, 10.1016/j.csite.2020.100611

Li, 2019, Thermo-economic evaluation of an innovative direct steam generation solar power system using screw expanders in a tandem configuration, Appl. Therm. Eng., 148, 1007, 10.1016/j.applthermaleng.2018.11.097

Li, 2017, Thermodynamic and economic investigation of a screw expander-based direct steam generation solar cascade Rankine cycle system using water as thermal storage fluid, Appl. Energy, 195, 137, 10.1016/j.apenergy.2017.03.033

Li, 2016, Analysis of a novel solar electricity generation system using cascade Rankine cycle and steam screw expander, Appl. Energy, 165, 627, 10.1016/j.apenergy.2015.12.087

Li, 2017, Modeling and optimization of solar-powered cascade Rankine cycle system with respect to the characteristics of steam screw expander, Renew. Energy, 112, 398, 10.1016/j.renene.2017.05.054

Habibi, 2020, Thermo-economic performance evaluation and multi-objective optimization of a screw expander-based cascade Rankine cycle integrated with parabolic trough solar collector, Appl. Therm. Eng., 180, 115827, 10.1016/j.applthermaleng.2020.115827

Zhang, 2021, Performance Improvement of KCS (Kalina Cycle System) 34 by Replacing Throttle Valve With Single-Screw Expander, Front. Energy Res., 9, 741704, 10.3389/fenrg.2021.741704