A Parametric Analysis on the Influence of the Binder Characteristics on the Behaviour of Passive Rock Bolts with the Block Reinforcement Procedure

Bawden FW (2011) Ground control using cable and rock bolting. In: Darling P (ed) SME mining engineering handbook. Society for Mining, Metallurgy and Exploration Inc., Littleton, pp 616–617

Carranza-Torres C (2009) Analytical and numerical study of the mechanics of rockbolt reinforcement around tunnels in rock masses. Rock Mech Rock Eng 42:175–228. https://doi.org/10.1007/s00603-009-0178-2

Chappell BA (1989) Rock bolts and shear stiffness in jointed rock mass. J Geotech Eng 115(2):179–197. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:2(179)

Chen SH, Qiang S, Chen SF, Egger P (2004) Composite element model of the fully grouted rock bolt. Rock Mech Rock Eng 37(3):193–212

Das KC, Deb D, Jha AK (2013) An enhanced numerical procedure for modelling fully grouted bolts intersected by rock joint. Geosyst Eng 16(1):37–46. https://doi.org/10.1080/12269328.2013.780738

He L, An XM, Zhao ZY (2015) Fully grouted rock bolts: an analytical investigation. Rock Mech Rock Eng 48(3):1181–1196. https://doi.org/10.1007/s00603-014-0610-0

Henning P, Ferreira P (2010) In-stope bolting for a safer working environment. J South Afr Inst Min Metall 110(1):47–51

Indraratna B, Kaiser PK (1990) Design for grouted rock bolts based on the convergence control method. Int J Rock Mech Min Sci Geomech Abstr 27:269–281

Lancellotta R, Cavalera J (1999) Fondazioni. Mc Graw Hill, Milano

Lang TA (1961) Theory and practice of rock bolting. Trans Soc Min Eng Am Inst Min Metall Petrol Eng 220:333–348

Li Y, Zhou H, Zhang L, Zhu W, Li S, Liu J (2016) Experimental and numerical investigations on mechanical property and reinforcement effect of bolted jointed rock mass. Constr Build Mater 126:843–856

Littlejohn GS, Bruce DA (1977) Rock anchors-state of the art. Foundation Publications Ltd, Brentwood

Nie W, Zhao ZY, Ning YJ, Guo W (2014) Numerical studies on rockbolts mechanism using 2D discontinuous deformation analysis. Tunn Undergr Space Technol 41:223–233

Oreste P (2008) Distinct analysis of fully grouted bolts around a circular tunnel considering the congruence of displacements between the bar and the rock. Int J Rock Mech Min Sci 45(7):1052–1067. https://doi.org/10.1016/j.ijrmms.2007.11.003

Oreste PP (2009) Face stabilisation of shallow tunnels using fibreglass dowels. Proc Inst Civil Eng Geotech Eng 162(2):95–109. https://doi.org/10.1680/geng.2009.162.2.95

Oreste P (2013) Face stabilization of deep tunnels using longitudinal fibreglass dowels. Int J Rock Mech Min Sci 58:127–140

Oreste PP, Cravero M (2008) An analysis of the action of dowels on the stabilization of rock blocks on underground excavation walls. Rock Mech Rock Eng 41(6):835–868. https://doi.org/10.1007/s00603-008-0162-2

Oreste PP, Dias D (2012) Stabilisation of the excavation face in shallow tunnels using fibreglass dowels. Rock Mech Rock Eng 45(4):499–517. https://doi.org/10.1007/s00603-012-0234-1

Ranjbarnia M, Fahimifar A, Oreste P (2014) A simplified model to study the behavior of pre-tensioned fully grouted bolts around tunnels and to analyze the more important influencing parameters. J Min Sci 50(3):533–548. https://doi.org/10.1134/S1062739114030156

Ranjbarnia M, Fahimifar A, Oreste P (2016) Practical method for the design of pretensioned fully grouted rockbolts in tunnels. Int J Geomech. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000464

Spagnoli G (2018) A review of soil improvement with non-conventional grouts. Int J Geotech Eng. https://doi.org/10.1080/19386362.2018.1484603