A New Subtraction-Type Miniature Cone Penetrometer

Kurup PU, Voyiadjis GZ, Tumay MT (1994) Calibration chamber studies of piezocone test in cohesive soil. J Geotech Eng 120(1):81–107

Robertson PK (2009) Interpretation of cone penetration tests—a unified approach. Can Geotech J 46(11):1337–1355

Tumay MT, Kurup PU (2001) Development of continuous intrusion miniature cone penetration test system for subsurface exploration. Soils Found 41(6):129–138

Hird CC, Springman SM (2006) Comparative performance of 5 cm2 and 10 cm2 piezocone in lacustrine clays. Geotechnique 56(6):427–438

Yoon HK, Jung SH, Lee JS (2011) Characterisation of subsurface spatial variability using a cone resistivity penetrometer. Soil Dyn Earthq Eng 31(7):1064–1071

Almeida MSS, Parry RHG (1985) Small cone penetrometer test and piezocone tests in laboratory consolidated clays. Geotech Test J 8(1):14–24

Rad SN, Tumay TM (1986) Effect of cementation on cone penetration resistance of sand: a model study. Geotech Test J 9(3):117–125

Silvestri V, Dakroup H, Fahmy Y (1997) Analysis of cone penetration and indentation tests in clayey soil. Can Geotech J 34(2):254–263

Bolton MD, Gui MW, Garnier J, Corte JF, Bagge G, Laue J, Renzi R (1999) Centrifuge cone penetration test in sand. Geotechnique 49(4):543–552

Titi HH, Mohammad LN, Tumay MT (2000) Miniature cone penetration test in soft and stiff clays. Geotech Test J 23(4):432–443

Kumar J, Raju KVSB (2007) Correlation between miniature cone tip resistance and shear strength parameters of clean and silty sand using a conventional triaxial setup. Geotech Test J 31(3):1–11

Lee W, Shin DH, Yoon HK, Lee JS (2009) Microcone penetrometer for more concise subsurface layer detection. Geotech Test J ASTM 32(4):1–7

Yoon HK, Lee JS (2012) Microcones configured with full bridge circuits. Soil Dyn Earthq Eng 41:119–127

Kim HJ, Choo YW, Kim DJ, Kim SK (2016) Miniature tip resistance on sand in centrifuge. J Geotech Geoenviron Eng 142(3):1–14

Lunne T, Robertson PK, Powell JM (1997) Cone penetration testing in geotechnical practice. Blackie Academic & Professional, London

ASTM D 5778-12 (2012) Standard test for electronic friction cone and piezocone penetration testing of soil. Annual book of ASTM standards

Hoffmann K (1989) An introduction to measurements using strain gages. Hottinger Baldwin Messtechnik GmbH, Darmstadt

Schofield AN, Wroth CP (1968) Critical state soil mechanics. McGraw-Hill, London

Yu HS (1993) Discussion on: singular plastic fields in steady penetration of a rigid cone. J Appl Mech 60(4):1061–1062

Rad NS, Lunne T (1988) Direct correlations between piezocone test results and undrained shear strength of clay. In: Proceeding of 1st international symposium on penetration testing, Orlando, pp 911–917

Karlsrud K, Lunne T, Brattlien K (1996) Improved CPTU correlations based on block samples. Proc Nord Geotech Conf Reyk 1:195–201

Meyerhof E (1961) The ultimate bearing capacity of wedge-shaped foundations. In: Proceedings of the 5th international conference on soil mechanical and foundation engineering, vol 2, pp 105–109

Ladanyi B, Johnston GH (1974) Behavior of circular footings and plate anchors embedded in permafrost. Can Geotech J 11(4):531–553

Durgunoglu HT, Mitchell JK (1975) Static penetration resistance of soils: I. analysis. Proc Conf In situ Meas Soil Prop ASCE N Y 1:151–171

Vesic AS (1977) Design of pile foundations. National cooperative highway research program report No. 42. Transportation Research Board, Washington

Baligh MM (1985) Strain path method. J Geotech Eng ASCE 111(9):1108–1136

Teh CI, Houlsby GT (1991) An analytical study of cone penetration test in clay. Geotechnique 41(1):17–34

Lu Q, Randolph MF, Hu Y, Bugarski IC (2004) A numerical study of cone penetration in clay. Geotechnique 54(4):257–267

Shin YJ, Kim D (2011) Assessment of undrained shear strength based on cone penetration test (CPT) for clayey soils. KSCE J Civ Eng 15:1161–1166

Sheng D, Cui L, Ansari Y (2013) Interpretation of cone factor in undrained soils via full-penetration finite-element analysis. Int J Geomech 13(6):745–753

Ma H, Zhou M, Hu Y, Hossain MS (2015) Interpretation of layer boundaries and shear strengths for soft-stiff-soft clays using CPT data: LDFE analyses. J Geotech Geoenviron Eng 142(1):1–12

Juneja A, Mir BA, Roshan NS (2013) Effect of the smear zone around SCP improved composite samples tested in the laboratory. Int J Geomech 13(1):16–25

Gui MW, Bolton MD (1998) Geometry and scale effects in CPT and pile design. In: Proceedings of the international conference geotechnical site characterization, Rotterdam, pp 1063–1068

Jamiolkowski M, Presti LFCD, Manassero M (1985) New developments in field and laboratory testing of soils. In: Theme lecture, 11th international conference on soil mechanics and foundation engineering, San Francisco

Meyerhof GG (1976) Bearing capacity and settlement of pile foundations. The eleventh Terzaghi lecture. J Geotech Eng Div 102(3):195–228

Puech A, Foray P (2002) Refined model for interpreting shallow penetration CPTs in sands. In: Offshore technology conference, OTC 14275

Bowles JE (1996) Foundation analysis and design. McGraw Hill, New York

Ahmadi MM, Robertson PK (2005) Thin layer effects on the CPT qc measurement. Can Geotech J 42(5):302–1317