A New Model for the Single Mesh Stiffness Calculation of Helical Gears Using the Slicing Principle

Ajmi M, Velex P (2005) A model for simulating the dynamic behaviour of solid wide-faced spur and helical gears. Mech Mach Theory 40:173–190

Cai Y (1995) Simulation on the rotational vibration of helical gears in consideration of the tooth separation phenomenon (A new stiffness function of helical involute tooth pair). J Mech Des 117(3):460–469

Chang L, Liu G, Wu L (2015) A robust model for determining the mesh stiffness of cylindrical gears. Mech Mach Theory 87:93–114

Chen Z, Shao Y (2011) Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth. Eng Fail Anal 18:2149–2164

Chen Z, Shao Y (2013) Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack. Mech Mach Theory 62:63–74

Chen Z, Zhai W, Shao Y, Wang K, Sun G (2016) Analytical model for mesh stiffness calculation of spur gear pair with non-uniformly distributed tooth root crack. Eng Fail Anal 66:502–514

Chen Z, Zhang J, Zhai W, Wang Y, Liu J (2017) Improved analytical methods for calculation of gear tooth fillet-foundation stiffness with tooth root crack. Eng Fail Anal 82:72–81

Feng M, Ma H, Li Z, Wang Q, Wen B (2017) An improved analytical method for calculating time-varying mesh stiffness of helical gears. Meccanica 28:1–15

Gu X, Velex P, Sainsot P, Bruyere J (2015) Analytical investigations on the mesh stiffness function of solid spur and helical gears. J Mech Des 137:063301-1–063301-7

Han L, Xu L, Qi H (2017) Influences of friction and mesh misalignment on time-varying mesh stiffness of helical gears. J Mech Sci Technol 31(7):3121–3130

Hedlund J, Lehtovaara A (2008) A parameterized numerical model for the evaluation of gear mesh stiffness variation of a helical gear pair. Proc Inst Mech Eng Part C J Mech Eng Sci 222:1321–1327

International Standard BS ISO 6336-1 (2006) Calculation of load capacity of spur and helical gears—Part I: basic principles, introduction and influence factors pp 70

Kiekbusch T, Sappok D, Sauer B, Howard I (2011) Calculation of the combined torsional mesh stiffness of spur gears with two- and three- Dimensional Parametrical FE Models. J Mech Eng 57:810–818

Kubur M, Kahraman A, Zini DM, Kienzle K (2004) Dynamic analysis of a multi-shaft helical gear transmission by finite elements: model and experiment. J Vib Acoust 126:398–406

Liu J, Shao Y (2017a) Dynamic modeling for rigid rotor bearing systems with a localized defect considering additional deformations at the sharp edges. J Sound Vib 398:84–102

Liu J, Shao Y (2017b) An improved analytical model for a lubricated roller bearing including a localized defect with different edge shapes. J Vib Control. https://doi.org/10.1177/1077546317716315

Liu J, Shao Y, Lim TC (2012) Vibration analysis of ball bearings with a localized defect applying piecewise response function. Mech Mach Theory 56:156–169

Liu J, Shi Z, Shao Y (2017) An analytical model to predict vibrations of a cylindrical roller bearing with a localized surface defect. Nonlinear Dyn 89(3):2085–2102

Ma H, Yang J, Song R, Zhang S, Wen B (2014) Effects of tip relief on vibration responses of a geared rotor system. J Mech Eng Sci 228:1132–1154

Ma H, Zeng J, Feng R, Pang X, Wang Q, Wen B (2015) Review on dynamics of cracked gear systems. Eng Fail Anal 55:224–245

Ma H, Li Z, Feng M, Feng R, Wen B (2016a) Time-varying mesh stiffness calculation of spur gears with spalling defect. Eng Fail Anal 66:166–176

Ma H, Zeng J, Feng R, Pang X, Wen B (2016b) An improved analytical method for mesh stiffness calculation of spur gears with tip relief. Mech Mach Theory 98:64–80

Maatar M, Velex P (1996) An analytical expression for the time-varying contact length in perfect cylindrical gears—some possible applications in gear dynamics. J Mech Des 118:586–589

Munro RG, Palmer D, Morrish L (2001) An experimental method to measure gear tooth stiffness throughout and beyond the path of contact. J Mech Eng Sci 215:793–803

Pandya Y, Parey A (2013) Experimental investigation of spur gear tooth mesh stiffness in the presence of crack using photoelasticity technique. Eng Fail Anal 34:488–500

Sainsot P, Velex P (2004) Contribution of gear body to tooth deflections—a new bi-dimensional analytical formula. J Mech Des 126:748–752

Umezawa K (1973) The meshing test on helical gears under load transmission (2nd report, The approximate formula for bending-moment distribution of gear tooth). Bull JSME 16(92):407–413

Umezawa K, Suzuki T (1985) Vibration power transmission helical gears (the effect of contact ratio on the vibration). Bull JSME. https://doi.org/10.1299/jsme1958.28.694

Umezawa K, Suzuki T, Sato T (1986) Vibration of power transmission of helical gears (approximate equation of tooth stiffness). Bull JSME. https://doi.org/10.1299/jsme1958.29.1605

Velex P (2012) On the modelling of spur and helical gear dynamic behaviour. In: Gokcek M (ed) Mechanical Engineering, pp 75–106. https://doi.org/10.5772/36157 . https://www.intechopen.com/books/mechanical-engineering/on-the-dynamic-behaviour-of-spur-and-helical-gears

Vijayakar SM (1991) A combined surface integral and finite solution for a three-dimension contact problem. Int J Numer Methods Eng 31:524–546

Wan Z, Cao H, Zi Y, He W, Chen Y (2015) Mesh stiffness calculation using an accumulated integral potential energy method and dynamic analysis of helical gears. Mech Mach Theory 92:447–463

Wang Q, Hu P, Zhang Y, Xu Y, Tong C (2014) A model to determine mesh characteristics in a gear pair with tooth profile error. Adv Mech Eng. https://doi.org/10.1155/2014/751476

Weber C (1949) The deformation of loaded gears and the effect on their load carrying capacity, sponsored research (Germany). Br Dept Sci Ind Res, Report No, p 3

Yesilyurt I, Gu F, Ball AD (2003) Gear tooth stiffness reduction measurement using modal analysis and its use in wear fault severity assessment of spur gears. NDT&E Int 36:357–372

Yu W (2017) Dynamic modelling of gear transmission systems with and without localized tooth defects. Ph.D. Thesis, Queen’s University, Kingston, Canada

Yu W, Shao Y, Mechefske CK (2015) The effects of spur gear tooth spatial crack propagation on gear mesh stiffness. Eng Fail Anal 54:103–119