Tổng quan toàn diện về những tiến bộ mới nhất trong sản xuất bổ sung các vật liệu composite ma trận kim loại: Tiềm năng, thách thức và các giải pháp khả thi

M. Dadkhah, A. Saboori, P. Fino, Materials (Basel) 12, 2823 (2019)

A. Saboori, S.K. Moheimani, M. Dadkhah, M. Pavese, C. Badini, P. Fino, Metals (Basel). 8, 172 (2018)

M.Yakout, M. A. Elbestawi, in 6th International Conference on Virtual Machining Process Technology (Montréal, 2017)

S.K. Moheimani, M. Dadkhah, M.H. Mosallanejad, A. Saboori, Metals (Basel) 11, 125 (2021)

W.H. Yu, S.L. Sing, C.K. Chua, C.N. Kuo, X.L. Tian, Prog. Mater. Sci. 104, 330 (2019)

S.A. Sajjadi, H.R. Ezatpour, H. Beygi, Mater. Sci. Eng. A 528, 8765 (2011)

S.A. Sajjadi, H.R. Ezatpour, M.T. Parizi, Mater. Des. 34, 106 (2012)

A. Saboori, E. Padovano, M. Pavese, C. Badini, Materials (Basel) 11, 171 (2018)

A. Saboori, E. Padovano, M. Pavese, H. Dieringa, C. Badini, Mater (Basel) 10, 1380 (2017)

F. Barati, M. Latifi, E. Moayeri far, M.H. Mosallanejad, A. Saboori, Materials (Basel) 12, 3976 (2019)

J.P. Tu, W. Rong, S.Y. Guo, Y.Z. Yang, Wear 255, 832 (2003)

R.R. Zheng, Y. Wu, S.L. Liao, W.Y. Wang, W.B. Wang, A.H. Wang, J. Alloys Compd. 590, 168 (2014)

K. Chu, Z. Liu, C. Jia, H. Chen, X. Liang, W. Gao, J. Alloy. Compd. 490, 453 (2010)

A. Saboori, R. Casati, A. Zanatta, M. Pavese, C. Badini, M. Vedani, Powder Metall. Met. Ceram. 56, 647 (2018)

S. Dadbakhsh, R. Mertens, L. Hao, J. Van Humbeeck, J.P. Kruth, Adv. Eng. Mater. 21, 1801244 (2019)

A.K. Ghosh, Solid State Processing, in Fundamentals of Metal-Matrix Composites. ed. by S. Suresh, A. Mortensen, A. Needleman, Butterworth-Heinmann,1993), pp. 23-41

A. Saboori, M. Dadkhah, P. Fino, M. Pavese, Metals (Basel). 8, 423 (2018)

J. Savolainen, M. Collan, Addit. Manuf. 32, 101070 (2020)

C. W. Hull, U.S. Patent 4,575,330 A, March 1986

J.S. Gero, M.L. Maher, in Third International Round Table Conference on Computational Models of Creative design, (Key Centre of Design Computing at the University of Sydney, Heron Island, Queensland, Australia, 1995)

C. Chu, G. Graf, D.W. Rosen, Comput. Aided Des. Appl. 5, 686 (2008)

O. Ivanova, C. Williams, T. Campbell, Rapid Prototyp. J. 19, 353 (2013)

J.O. Milewski, Understanding Metals for Additive Manufacturing, in Additive Manufacturing of Metals, (Springer International Publishing, 2017), pp. 7-33

P. Wu, J. Wang, X. Wang, Autom. Constr. 68, 21 (2016)

J.W. Stansbury, M.J. Idacavage, Dent. Mater. 32, 54 (2016)

M.S.K.K.Y. Nartu, S.A. Mantri, M.V. Pantawane, Y.H. Ho, B. McWilliams, K. Cho, N.B. Dahotre, R. Banerjee, Scr. Mater. 183, 28 (2020)

C. Doñate-Buendía, F. Frömel, M.B. Wilms, R. Streubel, J. Tenkamp, T. Hupfeld, M. Nachev, E. Gökce, A. Weisheit, S. Barcikowski, F. Walther, J.H. Schleifenbaum, B. Gökce, Mater. Des. 154, 360 (2018)

M.P. Behera, T. Dougherty, S. Singamneni, Procedia Manuf. 30, 159 (2019)

B. AlMangour, D. Grzesiak, J.M. Yang, Powder Technol. 309, 37 (2017)

D. Gu, H. Wang, G. Zhang, Metall. Mater. Trans. A 45, 464 (2014)

D. Gu, C. Ma, M. Xia, D. Dai, Q. Shi, Engineering 3, 675 (2017)

A. Ramakrishnan, G.P. Dinda, Mater. Des. 179, 107877 (2019)

S. Pouzet, P. Peyre, C. Gorny, O. Castelnau, T. Baudin, F. Brisset, C. Colin, P. Gadaud, Mater. Sci. Eng. A 677, 171 (2016)

A. Saboori, D. Gallo, S. Biamino, P. Fino, M. Lombardi, Appl. Sci. 7, 883 (2017)

A. Saboori, A. Aversa, G. Marchese, S. Biamino, M. Lombardi, P. Fino, Appl. Sci. 9, 3316 (2019)

N. Shamsaei, A. Yadollahi, L. Bian, S.M. Thompson, Addit. Manuf. 8, 12 (2015)

A. Standard, F2792. 2012. Standard terminology for additive manufacturing technologies, ASTM F2792–10e1. (2012)

N. Guo, M.C. Leu, Front. Mech. Eng. 8, 215 (2013)

A. others Standard, Standard terminology for additive manufacturing technologies, ASTM Int. F2792–12a. (2012)

M.H. Mosallanejad, B. Niroumand, A. Aversa, D. Manfredi, A. Saboori, J. Alloys Compd. 857, 157558 (2020)

F.I. Azam, A.M. Abdul Rani, K. Altaf, T.V.V.L.N. Rao, H.A. Zaharin, in, IOP Conference Series: Materials Science and Engineering, vol. 328 (2018), p. 012005

M.H. Mosallanejad, B. Niroumand, A. Aversa, A. Saboori, J. Alloys Compd. 872, 159567 (2021)

I. Yadroitsev, P. Bertrand, I. Smurov, Appl. Surf. Sci. 253, 8064 (2007)

S. Bremen, W. Meiners, A. Diatlov, Laser Tech. 9, 33 (2012)

E. Yasa, J. Kruth, Adv. Prod. Eng. Manag. 6, 259 (2011)

W. Sames, F. Medina, W. Peter, S. Babu, R.R. Dehoff, in, 8th International Symposium on Superalloy 718 and Derivatives, pp. 409–423

X. Zhang, C.J. Yocom, B. Mao, Y.L. Liao, J. Laser Appl. 31, 31201 (2019)

Y. Song, Y. Yan, R. Zhang, D. Xu, F. Wang, J. Mater. Process. Technol. 120, 237 (2002)

W.W. Wits, S.J. Weitkamp, J. van Es, Procedia CIRP 7, 252 (2013)

S. Hou, S. Qi, D.A. Hutt, J.R. Tyrer, M. Mu, Z. Zhou, J. Mater. Process. Technol. 254, 310 (2018)

M. Wong, I. Owen, C.J. Sutcliffe, Heat Transf. Eng. 30, 1068 (2009)

M. Zenou, O. Ermak, A. Saar, Z. Kotler, J. Phys. D. Appl. Phys. 47, 25501 (2013)

T.K.M.K. HayashiMaekawaTamuraHanyu, JSME Int. J. Ser. A Solid Mech. Mater. Eng. 48, 369 (2005)

D.A. Hollander, M. von Walter, T. Wirtz, R. Sellei, B. Schmidt-Rohlfing, O. Paar, H.J. Erli, Biomaterials 27, 955 (2006)

M. Kanazawa, M. Iwaki, S. Minakuchi, N. Nomura, J. Prosthet. Dent. 112, 1441 (2014)

D. Lin, C.R. Liu, G.J. Cheng, Acta Mater. 80, 183–193 (2014)

D. Lin, C. Ye, Y. Liao, S. Suslov, R. Liu, G.J. Cheng, J. Appl. Phys. 113(13), 133509 (2013)

D. Lin, C. Richard Liu, G.J. Cheng, J. Appl. Phys. 115(11), 113513 (2014)

Z.H. Liu, D.Q. Zhang, S.L. Sing, C.K. Chua, L.E. Loh, Mater. Charact. 94, 116 (2014)

M. Erdal, S. Dag, Y. Jande, C.M. Tekin, Materials Science Forum, Multiscale, in Multifunct. Funct. Graded Mater., (Trans Tech Publications Ltd, 2010), pp. 253-258

V.E. Beal, P. Erasenthiran, C.H. Ahrens, P. Dickens, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 221, 945 (2007)

D. Gu, Y.C. Hagedorn, W. Meiners, G. Meng, R.J.S. Batista, K. Wissenbach, R. Poprawe, Acta Mater. 60, 3849 (2012)

R. Larson, U.S. Patent 5,786,562, July 1998

W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, S.S. Babu, Int. Mater. Rev. 61, 315 (2016)

L.E. Murr, S.M. Gaytan, D.A. Ramirez, E. Martinez, J. Hernandez, K.N. Amato, P.W. Shindo, F.R. Medina, R.B. Wicker, J. Mater. Sci. Technol. 28, 1 (2012)

L. Loeber, S. Biamino, U. Ackelid, S. Sabbadini, P. Epicoco, P. Fino, J. Eckert, in, Solid Freeform Fabrication Symposium (Conference paper of 22nd International symposium Solid freeform fabrication proceedings, University of Texas, Texas, Austin, 2011), pp. 547–556

J. Karlsson, A. Snis, H. Engqvist, J. Lausmaa, J. Mater. Process. Technol. 213, 2109 (2013)

J.K. Algardh, T. Horn, H. West, R. Aman, A. Snis, H. Engqvist, J. Lausmaa, O. Harrysson, Addit. Manuf. 12, 45 (2016)

V. Petrovic, R. Ninerola, Aircr. Eng. Aerosp. Technol. Int. J. 87, 147 (2015)

A. Saboori, A. Abdi, S.A. Fatemi, G. Marchese, S. Biamino, H. Mirzadeh, Mater. Sci. Eng. A 792, 139822 (2020)

H.P. Tang, M. Qian, N. Liu, X.Z. Zhang, G.Y. Yang, J. Wang, JOM 67, 555 (2015)

G. Del Guercio, M. Galati, A. Saboori, P. Fino, L. Iuliano, Acta Metall. Sin. Engl. Lett. 33, 183 (2020)

J. Wang, H. Tang, Mater. Technol. 31, 86 (2016)

L.E. Murr, S.M. Gaytan, A. Ceylan, E. Martinez, J.L. Martinez, D.H. Hernandez, B.I. Machado, D.A. Ramirez, F. Medina, S. Collins, R.B. Wicker, Acta Mater. 58, 1887 (2010)

S. Biamino, A. Penna, U. Ackelid, S. Sabbadini, O. Tassa, P. Fino, M. Pavese, P. Gennaro, C. Badini, Intermetallics 19, 776 (2011)

H.P. Tang, G.Y. Yang, W.P. Jia, W.W. He, S.L. Lu, M. Qian, Mater. Sci. Eng. A 636, 103 (2015)

J. Schwerdtfeger, C. Körner, Intermetallics 49, 29 (2014)

P. Drescher, H. Seitz, RTeJournal-Fachforum Fur Rapid Technol. 2015, 1 (2015)

A. L. A. Koptyug, L.E. Rännar, M. Bäckström, in, Proceedings of the International Conference on Additive Manufacturing and 3D Printing (Nottingham, 2013)

G. Del Guercio, M. Galati, A. Saboori, Met. Mater. Int. 27, 55 (2021)

L.E. Rännar, A. Koptyug, J. Olsén, K. Saeidi, Z. Shen, Addit. Manuf. 17, 106 (2017)

Y. Zhong, L.E. Rännar, S. Wikman, A. Koptyug, L. Liu, D. Cui, Z. Shen, Fusion Eng. Des. 116, 24 (2017)

R.R. Dehoff, M.M. Kirka, W.J. Sames, H. Bilheux, A.S. Tremsin, L.E. Lowe, S.S. Babu, Mater. Sci. Technol. 31, 931 (2015)

S.P. Narra, R. Cunningham, J. Beuth, A.D. Rollett, Addit. Manuf. 19, 160 (2018)

T.T. Roehling, S.S.Q. Wu, S.A. Khairallah, J.D. Roehling, S.S. Soezeri, M.F. Crumb, M.J. Matthews, Acta Mater. 128, 197 (2017)

D.S. Shim, G.Y. Baek, J.S. Seo, G.Y. Shin, K.P. Kim, K.Y. Lee, Opt. Laser Technol. 86, 69 (2016)

F. Mazzucato, S. Tusacciu, M. Lai, S. Biamino, M. Lombardi, A. Valente, Technologies 5, 29 (2017)

S.B. Gibson I, Rosen D, Directed Energy Deposition Processes., in Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing. ed. by I. Gibson, D. Rosen, B. Strucker (Springer-Verlag New York, 2015), pp. 245-268

W.E. Frazier, J. Mater. Eng. Perform. 23, 1917 (2014)

T.D. Ngo, A. Kashani, G. Imbalzano, K.T.Q. Nguyen, D. Hui, Compos. Part B Eng. 143, 172 (2018)

C. Selcuk, Powder Met. 54, 94 (2011)

X. Wang, M. Jiang, Z. Zhou, J. Gou, D. Hui, Compos. Part B Eng. 110, 442 (2017)

M. Ma, Z. Wang, X. Zeng, Mater. Charact. 106, 420 (2015)

S.H. Riza, S.H. Masood, C. Wen, D. Ruan, S. Xu, Mater. Des. 64, 650 (2014)

S.R. Bhavar. V. Kattire, P. Patil, S. Khot, K. Gujar, in, 4th International conference and exhibition on additive manufacturing technologies (2014)

S.A. Khairallah, A.T. Anderson, A. Rubenchik, W.E. King, Acta Mater. 108, 36 (2016)

T.M. Mower, M.J. Long, Mater. Sci. Eng. A 651, 198 (2016)

A. Saboori, S. Biamino, S. Tusacciu, E. Reggio, M. Busatto, M. Lai, P. Fino, M. Lombardi, in, Euro PM2017 Congress and Exhibition (2017), pp. 1–5

A. Saboori, G. Piscopo, M. Lai, A. Salmi, S. Biamino, Mater. Sci. Eng. A 780, 139179 (2020)

M. Aristizabal, P. Jamshidi, A. Saboori, S.C. Cox, M.M. Attallah, Mater. Lett. 259, 126897 (2020)

B. Jiang, L. Zhenglong, C. Xi, L. Peng, L. Nannan, C. Yanbin, Ceram. Int. 45, 5680 (2019)

J.H. Martin, B.D. Yahata, J.M. Hundley, J.A. Mayer, T.A. Schaedler, T.M. Pollock, Nature 549, 365 (2017)

X.P. Li, G. Ji, Z. Chen, A. Addad, Y. Wu, H.W. Wang, J. Vleugels, J. Van Humbeeck, J.P. Kruth, Acta Mater. 129, 183 (2017)

A. Saboori, M. Pavese, C. Badini, P. Fino, Front. Mater. Sci. 11, 171 (2017)

A. Saboori, X. Chen, C. Badini, P. Fino, M. Pavese, Trans. Nonferrous Met. Soc. China 29, 657 (2019)

J.M. Torralba, C.E. da Costa, F. Velasco, J. Mater. Process. Technol. 133, 203 (2003)

B. Chen, X. Xi, C. Tan, X. Song, Curr. Opin. Chem. Eng. 28, 28 (2020)

J. Wu, X.Q. Wang, W. Wang, M.M. Attallah, M.H. Loretto, Acta Mater. 117, 311 (2016)

D. Gu, Y. Yang, L. Xi, J. Yang, M. Xia, Opt. Laser Technol. 119, 105600 (2019)

K.G. Prashanth, J. Eckert, J. Alloys Compd. 707, 27 (2017)

D. Gu, X. Rao, D. Dai, C. Ma, L. Xi, K. Lin, Addit. Manuf. 29, 100801 (2019)

Z. Lei, J. Bi, Y. Chen, X. Chen, X. Qin, Z. Tian, Powder Technol. 356, 594 (2019)

J. Jue, D. Gu, J. Compos. Mater. 51, 519 (2017)

S. Lathabai, Additive Manufacturing of Aluminium-Based Alloys and Composites, in Fundamentals of Aluminium Metallurgy. ed. by R.N. Lumley (Woodhead Publishing, Sawston, 2018), pp. 47–92

X. Wen, Q. Wang, Q. Mu, N. Kang, S. Sui, H. Yang, X. Lin, W. Huang, Mater. Sci. Eng. A 745, 319 (2019)

F. Rikhtegar, S.G. Shabestari, H. Saghafian, J. Alloys Compd. 723, 633 (2017)

W. Zhou, M. Dong, Z. Zhou, X. Sun, K. Kikuchi, N. Nomura, A. Kawasaki, Carbon 141, 67 (2019)

Y. Ma, G. Ji, X.P. Li, C.Y. Chen, Z.Q. Tan, A. Addad, Z.Q. Li, T.B. Sercombe, J.P. Kruth, Materialia 5, 100242 (2019)

J.K. Tiwari, A. Mandal, N. Sathish, A.K. Agrawal, A.K. Srivastava, Addit. Manuf. 33, 101095 (2020)

Z. Hu, F. Chen, J. Xu, Q. Nian, D. Lin, C. Chen, X. Zhu, Y. Chen, M. Zhang, J. Alloys Compd. 746, 269 (2018)

P. Bai, Y. Jin, Z. Zhao, L. Li, M. Liang, H. Liao, W. Zhao, Y. Hu, W. Du, Mater. Res. Express 6, 1065cl (2019)

J.C. Li, X. Lin, N. Kang, J.L. Lu, Q.Z. Wang, W.D. Huang, J. Alloys Compd. 826, 154077 (2020)

C. Gao, Z. Wang, Z. Xiao, D. You, K. Wong, A.H. Akbarzadeh, J. Mater. Process. Technol. 281, 116618 (2020)

H. Tan, D. Hao, K. Al-Hamdani, F. Zhang, Z. Xu, A.T. Clare, Mater. Lett. 214, 123 (2018)

X. Zhao, D. Gu, C. Ma, L. Xi, H. Zhang, Vacuum 160, 189 (2019)

L. Wu, Z. Zhao, P. Bai, W. Zhao, Y. Li, M. Liang, H. Liao, P. Huo, J. Li, Appl. Surf. Sci. 503, 144156 (2020)

C. Gao, Z. Liu, Z. Xiao, W. Zhang, K. Wong, A.H. Akbarzadeh, J. Alloys Compd. 853, 156722 (2020)

F. Chang, D. Gu, D. Dai, P. Yuan, Surf. Coat. Technol. 272, 15 (2015)

P. Wang, C. Gammer, F. Brenne, T. Niendorf, J. Eckert, S. Scudino, Compos. Part B Eng. 147, 162 (2018)

A. Saboori, S. Biamino, M. Lombardi, S. Tusacciu, M. Busatto, M. Lai, P. Fino, Powder Metall. 62, 213 (2019)

L. Yan, X. Chen, W. Li, J. Newkirk, F. Liou, J. Newkirk, F. Liou, J. Alloy. Compd. 22, 810 (2016)

I.V. Okulov, A.S. Volegov, H. Attar, M. Bönisch, S. Ehtemam-Haghighi, M. Calin, J. Eckert, J. Mech. Behav. Biomed. Mater. 65, 866 (2017)

K. Kondoh, 16-Titanium Metal matrix composites by powder metallurgy (PM) routes, in Titanium Powder Metallurgy, ed. by M. Qian and F. H. (Sam) Froes (Butterworth-Heinemann, Boston, 2015), pp. 277–297

Y. Liu, L.F. Chen, H.P. Tang, C.T. Liu, B. Liu, B.Y. Huang, Mater. Sci. Eng. A 418, 25 (2006)

A. Saboori, S. Tusacciu, M. Busatto, M. Lai, S. Biamino, P. Fino, M. Lombardi, J. Vis. Exp. 2018, e56966 (2018)

B. Baufeld, O. Van der Biest, R. Gault, Mater. Des. 31, S106 (2010)

H. Attar, S. Ehtemam-Haghighi, D. Kent, M.S. Dargusch, Int. J. Mach. Tools Manuf. 133, 85 (2018)

J. Wang, L. Li, C. Tan, H. Liu, P. Lin, J. Mater. Process. Technol. 252, 524 (2018)

S. Liu, Y.C. Shin, Mater. Des. 136, 185 (2017)

S. M. Artem Builuk, Marina Kazachenok, in AIP Conference Proceedings 2167, 020039 (2019)

L. Li, J. Wang, P. Lin, H. Liu, Ceram. Int. 43, 16638 (2017)

C.A. Terrazas, L.E. Murr, D. Bermudez, E. Arrieta, D.A. Roberson, R.B. Wicker, J. Mater. Sci. Technol. 35, 309 (2019)

Y. Liu, S. Li, R.D.K. Misra, K. Geng, Y. Yang, Scr. Mater. 183, 6 (2020)

P.K. Farayibi, T.E. Abioye, A. Kennedy, A.T. Clare, J. Manuf. Process. 45, 429 (2019)

H. Li, Z. Yang, D. Cai, D. Jia, Y. Zhou, Mater. Des. 185, 108245 (2020)

H. Attar, M. Bönisch, M. Calin, L.C. Zhang, S. Scudino, J. Eckert, Acta Mater. 76, 13 (2014)

B. He, K. Chang, W. Wu, C. Zhang, Vacuum 143, 23 (2017)

Y. Hu, W. Cong, X. Wang, Y. Li, F. Ning, H. Wang, Compos. Part B Eng. 133, 91 (2018)

H. Attar, S. Ehtemam-Haghighi, D. Kent, I.V. Okulov, H. Wendrock, M. Bӧnisch, A.S. Volegov, M. Calin, J. Eckert, M.S. Dargusch, Mater. Sci. Eng. A 688, 20 (2017)

J. Jin, S. Zhou, Y. Zhao, Q. Zhang, X. Wang, W. Li, D. Chen, L.C. Zhang, Opt. Laser Technol. 134, 106644 (2021)

D. Gu, Y.C. Hagedorn, W. Meiners, K. Wissenbach, R. Poprawe, Surf. Coatings Technol. 205, 3285 (2011)

P. Krakhmalev, I. Yadroitsev, Intermetallics 46, 147 (2014)

G. Chen, R.Z. Liu, Y.D. Qiu, Y. Yang, J.M. Wu, S.F. Wen, J. Liu, Y.S. Shi, H.B. Tan, Mater. Today Commun. 24, 101114 (2020)

M. Das, V.K. Balla, D. Basu, S. Bose, A. Bandyopadhyay, Scr. Mater. 63, 438 (2010)

K. Morsi, V.V. Patel, J. Mater. Sci. 42, 2037 (2007)

Y. Horiuchi, T. Inamura, H.Y. Kim, K. Wakashima, S. Miyazaki, H. Hosoda, Mater. Trans. 48, 407 (2007)

H. Attar, M. Bönisch, M. Calin, L.C. Zhang, K. Zhuravleva, A. Funk, S. Scudino, C. Yang, J. Eckert, J. Mater. Res. 29, 1941 (2014)

M. Xia, A. Liu, Z. Hou, N. Li, Z. Chen, H. Ding, J. Alloys Compd. 728, 436 (2017)

C.L. Wu, S. Zhang, C.H. Zhang, J.B. Zhang, Y. Liu, J. Chen, Opt. Laser Technol. 115, 134 (2019)

B. AlMangour, Y.K. Kim, D. Grzesiak, K.A. Lee, Compos. Part B Eng. 156, 51 (2019)

X. Li, C.H. Zhang, S. Zhang, C.L. Wu, J.B. Zhang, H.T. Chen, A.O. Abdullah, Vacuum 165, 139 (2019)

D. Tanprayoon, S. Srisawadi, Y. Sato, M. Tsukamoto, T. Suga, Opt. Laser Technol. 129, 106238 (2020)

G. Lian, C. Zhao, Y. Zhang, X. Huang, C. Chen, J. Jiang, Coatings 9, 498 (2019)

D.E. Cooper, N. Blundell, S. Maggs, G.J. Gibbons, J. Mater. Process. Technol. 213, 2191 (2013)

L. Chen, Y. Sun, L. Li, X. Ren, Corros. Sci. 169, 108606 (2020)

Y. Wang, J. Shi, J. Manuf. Sci. Eng. 142, 5 (2020)

L. Constantin, L. Fan, M. Pontoreau, F. Wang, B. Cui, J.L. Battaglia, J.F. Silvain, Y.F. Lu, Manuf. Lett. 24, 61 (2020)

Y.C. Zhao, Y. Tang, M.C. Zhao, C. Liu, L. Liu, C.D. Gao, C. Shuai, A. Atrens, JOM 72, 1163 (2020)

S.J. Hollister, Nat. Mater. 4, 518 (2005)