A Compensation Algorithm for Large Element Characterizing the Damage Evolution Process and Its Application to Structure Collisions

Springer Science and Business Media LLC
Wen Li1, Lele Zhang1, Yifan Ru1, Geng Chen1, Weiyuan Dou2
1School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China
2National International Science and Technology Cooperation Base, Beijing Jiaotong University, Beijing 100044, China

Tóm tắt

AbstractWhen simulating the process from elastic–plastic deformation, damage to failure in a metal structure collision, it is necessary to use the large shell element due to the calculation efficiency, but this would affect the accuracy of damage evolution simulation. The compensation algorithm adjusting failure strain according to element size is usually used in the damage model to deal with the problem. In this paper, a new nonlinear compensation algorithm between failure strain and element size was proposed, which was incorporated in the damage model GISSMO (Generalized incremental stress state dependent damage model) to characterize ductile fracture. And associated material parameters were calibrated based on tensile experiments of aluminum alloy specimens with notches. Simulation and experimental results show that the new compensation algorithm significantly reduces the dependence of element size compared with the constant failure strain model and the damage model with the linear compensation algorithm. During the axial splitting process of a circular tubular structure, the new compensation algorithm keeps the failure prediction errors low over the stress states ranging from shear to biaxial tension, and achieves the objective prediction of the damage evolution process. This study demonstrates how the compensation algorithm resolves the contradiction between large element size and fracture prediction accuracy, and this facilitates the use of the damage model in ductile fracture prediction for engineering structures.

Từ khóa


Tài liệu tham khảo

X Liu, Q Wu, S Su, et al. Evaluation and prediction of material fatigue characteristics under impact loads: Review and prospects. International Journal of Structural Integrity, 2022, 13(2): 251–277.

R Kumar, J S Chohan, R Goyal, et al. Impact of process parameters of resistance spot welding on mechanical properties and micro hardness of stainless steel 304 weldments. International Journal of Structural Integrity, 2021, 12(3): 366–377.

H Zhu, L Zhu, J Chen. Damage and fracture mechanism of 6063 aluminum alloy under three kinds of stress states. Rare Metals, 2008, 27(1): 64–69.

D Mohr, S J Marcadet. Micromechanically–motivated phenomenological Hosford–Coulomb model for predicting ductile fracture initiation at low stress triaxialities. International Journal of Solids and Structures, 2015, 67–68: 40–55.

L Y Qian, G Fang, P Zeng. Modeling of the ductile fracture during the sheet forming of aluminum alloy considering non–associated constitutive characteristic. International Journal of Mechanical Sciences, 2017, 126: 55–66.

Q T Pham, B H Lee, K C Park, et al. Influence of the post–necking prediction of hardening law on the theoretical forming limit curve of aluminium sheets. International Journal of Mechanical Sciences, 2018, 140: 521–536.

S P Keeler, W A Backofen. Plastic instability and fracture in sheets stretched over rigid punches. ASM Transactions Quarterly, 1964, 56: 25–48.

F Neukamm, M Feucht, A Haufe. Considering damage history in crashworthiness simulations. 7th European LS–DYNA Conference, Salzburg, Austria, May 14–15, 2009: 1–9.

Y Li, M Luo, J Gerlach, et al. Prediction of shear–induced fracture in sheet metal forming. Journal of Materials Processing Technology, 2010, 210(14): 1858–1869.

Y L Bai, T Wierzbicki. Application of extended Mohr–Coulomb criterion to ductile fracture. International Journal of Fracture, 2010, 161: 1–20.

V Tvergaard, A Needleman. Analysis of the cup–cone fracture in a round tensile bar. Acta Metallurgica, 1984, 32(1): 157–169.

J Lemaitre. Evalution of dissipation and damage in metals submitted to dynamic loading. International Conference of Mechanical Behavior of Materials, Kyoto, Japan, 1971: 540–549.

F Neukamm, M Feucht, K Roll, et al. On closing the constitutive gap between forming and crash simulation. 10th International LS–DYNA Users Conference, Dearborn, USA, May 8, 2008: 21–31.

F Andrade, M Feucht, A Haufe, et al. An incremental stress state dependent damage model for ductile failure prediction. International Journal of Fracture, 2016, 200(1–2): 127–150.

S Tabacu, C Ducu. Numerical investigations of 3D printed structures under compressive loads using damage and fracture criterion: Experiments, parameter identification, and validation. Extreme Mechanics Letters, 2020, 39: 1–15.

M Otroshi, M Rossel, G Meschut. Stress state dependent damage modeling of self–pierce riveting process simulation using GISSMO damage model. Journal of Advanced Joining Processes, 2020, 1: 1–8.

S K Lee, J S Lee, J H Song, et al. Fracture simulation of cold roll forming process for aluminum 7075–T6 automotive bumper beam using GISSMO damage model. Procedia Manufacturing, 2018, 15: 751–758.

Y Bao, T Wierzbicki. On fracture locus in the equivalent strain and stress triaxiality space. International Journal of Mechanical Sciences, 2004, 46: 81–98.

Y Bai, T Wierzbicki. A new model of metal plasticity and fracture with pressure and Lode dependence. International Journal of Plasticity, 2008, 24(6): 1071–1096.

J Gao, T He, Y Huo, et al. Comparison of modified Mohr–Coulomb model and Bai–Wierzbicki model for constructing 3D ductile fracture envelope of AA6063. Chinese Journal of Mechanical Engineering, 2021, 34: 35.

L Wei, F Qin, K Cui. Prediction the stainless steel sheet fracture with mesh size effect for shell elements. International Journal of Solids and Structures, 2021, 210–211: 35–48.

J C He, S P Zhu, D Liao, et al. Probabilistic fatigue assessment of notched components under size effect using critical distance theory. Engineering Fracture Mechanics, 2020, 235: 1–14.

H Zhu, L Zhu, J Chen, et al. Deformation and damage mechanism of aluminum alloy under different stress states. Transactions of Nonferrous Metals Society of China, 2006, 16: 1279–1284.

D Anderson, C Butcher, N Pathak, et al. Failure parameter identification and validation for a dual–phase 780 steel sheet. International Journal of Solids and Structures, 2017, 124: 89–107.

H S Alsos, J Amdahl, O S Hopperstad. On the resistance to penetration of stiffened plates, Part II: Numerical analysis. International Journal of Impact Engineering, 2009, 36(7): 875–887.

H S Alsos, J Amdahl. On the resistance to penetration of stiffened plates, Part I – Experiments. International Journal of Impact Engineering, 2009, 36(6): 799–807.

M Storheim, H S Alsos, O S Hopperstad, et al. A damage–based failure model for coarsely meshed shell structures. International Journal of Impact Engineering, 2015, 83: 59–75.

C L Walters. Framework for adjusting for both stress triaxiality and mesh size effect for failure of metals in shell structures. International Journal of Crashworthiness, 2014, 19(1): 1–12.

M Kõrgesaar, J Romanoff. Influence of mesh size, stress triaxiality and damage induced softening on ductile fracture of large–scale shell structures. Marine Structures, 2014, 38: 1–17.

M Kõrgesaar. The effect of low stress triaxialities and deformation paths on ductile fracture simulations of large shell structures. Marine Structures, 2019, 63: 45–64.

P B Woelke. Simplification of the Gurson model for large–scale plane stress problems. International Journal of Plasticity, 2020, 125: 331–347.

M Kõrgesaar, H Remes, J Romanoff. Size dependent response of large shell elements under in–plane tensile loading. International Journal of Solids and Structures, 2014, 51(21): 3752–3761.

Y S Tai, M Y Huang, H T Hu. Axial compression and energy absorption characteristics of high–strength thin–walled cylinders under impact load. Theoretical and Applied Fracture Mechanics, 2010, 53(1): 1–8.

C Batuwitage, S Fawzia, D Thambiratnam, et al. Impact behaviour of carbon fibre reinforced polymer (CFRP) strengthened square hollow steel tubes: A numerical simulation. Thin–Walled Structures, 2018, 131: 245–257.

A S M Ashab, D Ruan, G Lu, et al. Quasi–static and dynamic experiments of aluminum honeycombs under combined compression–shear loading. Materials & Design, 2016, 97: 183–194.

W J Stronge, T X Yu, W Johnson. Long stroke energy dissipation in splitting tubes. International Journal of Mechanical Sciences, 1983, 25(9): 637–647.

W Guan, Y Yu, G Gao. Crashworthiness performance and multiobjective optimization of a combined splitting circular tube energy absorber under eccentric impact for subway vehicles. International Journal of Impact Engineering, 2021, 158: 1–17.

J Rouzegar, M Karimi. Numerical and experimental study of axial splitting of circular tubular structures. Thin–Walled Structures, 2016, 105: 57–70.

N Stander, A Basudhar, W Roux, et al. LS–OPT User’s Manual. Livermore, California: Livermore Software Technology Corporation, 2020.

S Wang, Y Peng, T Wang, et al. Collision performance and multi-objective robust optimization of a combined multi-cell thin-walled structure for high speed train. Thin-Walled Structures, 2019, 135: 341–355.

Thông tin
Thông tin xuất bản

Springer Science and Business Media LLC

Thông tin tác giả