A 3D transient model of keyhole and melt pool dynamics in laser beam welding applied to the joining of zinc coated sheets

Ye X-H, Chen X (2002) Three-dimensional modeling of heat transfer and fluid flow in laser full-penetration welding. J Phys D Appl Phys 35:1049–1056. doi: 10.1088/0022-3727/35/10/313

Ki H, Mohanty PS, Mazumder J (2001) Modelling of high-density laser–material interaction using fast level set method. J Phys D Appl Phys 34:364–372. doi: 10.1088/0022-3727/34/3/320

Klein T, Vicanek M, Simon G (1996) Forced oscillations of the keyhole in penetration laser beam welding. J Phys D Appl Phys 29:322–332. doi: 10.1088/0022-3727/29/2/008

Ruf A (2004) Modellierung des Perkussionsbohrens von Metallen mit kurz- und ultrakurzgepulsten Lasern, Dissertation, IFSW Stuttgart, Herbert Utz Verlag, München

Solana P, Ocana JL (1997) A mathematical model for penetration laser welding as a free-boundary problem. J Phys D Appl Phys 30:1300–1313. doi: 10.1088/0022-3727/30/9/005

Geisel M (2002) Prozesskontrolle und –steuerung beim Laserstrahlschweißen mit den Methoden der nichtlinearen Dynamik, Dissertation, Chair of Manufacturing Technology, Meisenbach Verlag, Bamberg

Beyer E (1995) Schweißen mit Laser. Springer, Berlin

Dowden JM (2001) The mathematics of thermal modeling. Chapman & Hall/CRC, Boca Raton

Demtröder W (2001) Experimentalphysik 1–Mechanik und Wärme, 2nd edn. Springer, Berlin

© 2004-2008 OpenCFD Limited, http:/ www.opencfd.co.uk

Hirt CW, Nichols BD (1981) Volume of fluid (VOF) method for the dynamics of free boundaries. J Comput Phys 39:201–225. doi: 10.1016/0021-9991(81)90145-5

Ubbink O (1997) Numerical prediction of two fluid systems with sharp interfaces. PhD Thesis, University of London

Müller MG (2002) Prozessüberwachung beim Laserstrahlschweißen durch Auswertung der reflektierten Leistung, Dissertation, Herbert Utz Verlag, München

Stöcker H (2000) Taschenbuch der Physik, 4th edn. Verlag Harri Deutsch, Thun

Wachter A, Hoeber H (1998) Repetitorium Theoretische Physik. Springer, Berlin

Schoonderbeek A (2005) Laser drilling of metals with a XeCl excimer laser. PhD Thesis, Nederlands Centrum voor Laser Research, Print Partners Ipskamp, Enschede

Kägeler C, Albert F, Mys I, Grimm A, Urmoneit U (2007) Observation of process oscillations during high power laser welding. In: Geiger M, Otto A, Schmidt M (eds) Proceedings of the LANE 2007. Meisenbach, Bamberg, pp 123–135

Kägeler C, Klämpfl F, Schmidt M, Otto A (2007) Investigating a laser welding process with methods of non-linear dynamics. In: Vollertsen F, Emmelmann C, Schmidt M, Otto A (eds) Proceedings of the fourth international WLT-conference on lasers in manufacturing, pp 155–160

Kurzyna J (1998) Searching for chaos fluctuations of a plasma induced during cw-CO2 laser welding. J Phys D Appl Phys 31:680–692. doi: 10.1088/0022-3727/31/6/016

Tzeng YF (2006) Gap-free lap welding of zinc-coated steel using pulsed CO2 laser. Int J Adv Manuf Technol 29:287–295. doi: 10.1007/s00170-005-2522-3

Fabbro R, Coste F, Goebels D, Kielwasser M (2006) Study of CW Nd-Yag laser welding of Zn-coated steel sheets. J Phys D Appl Phys 39:401–409. doi: 10.1088/0022-3727/39/2/024

Koch H, Leitz K-H, Otto A (2007) Three dimensional simulation of laser keyhole welding. In: Geiger M, Otto A, Schmidt M (eds) Proceedings of the LANE 2007. Meisenbach, Bamberg, pp 251–260

Rito et al. (1988) Laser welding method. US Patent 4.745.257

Schmidt M, Otto A, Kägeler C (2008) Analysis of YAG laser lap-welding of zinc coated steel sheets. CIRP Annals—Manufacturing Technology Nr. 57/1, pp 213–216

Hesse T (2008) Neue Erkenntnisse und Lösungsgrundlagen beim Laserstrahlschweißen von verzinkten Werkstoffen. In: Ebert F (ed) Proceedings of EALA, pp 14–23

Hesse T (2006) Prozesskontrolle mittels optischer Spektralanalyse für das Schweißen verzinkter Stahlfeinbleche mit Nd:YAG-Lasern. Dissertation, Laser Zentrum Hannover, PZH Verlag, Garbsen

Katayama S, Wu Y, Matsunawa A (2001) Laser welding of zinc-coated steels. In: Proceedings of the ICALEO 2001, Paper no. P520

Baardsen EL (1976) Method of welding galvanized steel. US Patent 3.969.604

Pennington EJ (1987) Laser welding of galvanized steel. US Patent 4.642.446

Stol I et al. (2004) Laser welding with beam oscillation. US Patent 6.740.845

Banas CM et al (1987) Twin spot laser welding. US Patent 4.691.093, 1987

Otto A, Geiger M (2007) From basic research to industrial applications—new developments for laser beam welding. In: Proceedings of the 4th international WLT-conference on lasers in manufacturing 2007. AT-Fachverlag, Stuttgart, pp 5–12