Calculation of Heat Flux Across the Hot Surface of Continuous Casting Mold Through Two-Dimensional Inverse Heat Conduction Problem
Tóm tắt
A novel method for the estimation of the mold hot surface heat flux based on the measured responding temperatures from two columns of thermocouples that embedded inside the mold during continuous casting has been developed. The method includes a Two-Dimensional Inverse transient Heat Conduction Problem (2D-IHCP) model that was solved by the conjugate gradient method with Adjoint Equation. The model was validated by comparing the results with those calculated by a robust One-Dimensional Inverse transient Heat Conduction Problem (1D-IHCP). The solution of a test problem indicated that the Mean Absolute Percentage Error of the estimated heat flux calculated by the new method is about 9 to 40 pct of those calculated by the 1D-IHCP. Then, the method is applied to compute the heat flux for a mold simulator experiment. The results indicated that the heat fluxes and temperatures across mold hot surface calculated by 2D-IHCP show the same variation tendency as those calculated by 1D-IHCP. However, the heat fluxes calculated by 2D-IHCP are about 1.2 to 2 times larger than those calculated by 1D-IHCP for the locations below the liquid mold flux surface and are about 50 to 90 pct of those calculated by 1D-IHCP for the locations above the liquid mold flux surface.
Tài liệu tham khảo
A. Badri, T.T. Natarajan, C.C. Snyder, K.D. Powers, F.J. Mannion, M. Byrne, and A.W. Cramb: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 373–83.
B. Weisgerber, K. Harste, and W. Bleck: Steel Res. Int., 2004, vol. 75, pp. 686–92.
M.M. Wolf, Initial solidification and strand surface quality of peritectic steels, Continuous Casting, vol. 9, Iron and Steel Society/AIME, Warrendale, PA, 1997.
J.K. Brimacombe and K. Sorimachi: Metall. Trans. B, 1977, vol. 8B, pp. 489–505.
C.A. Pinheiro: Ph.D. Thesis, University of British Columbia, 1997.
K.E. Blazek: Iron Steelmaker, 1987, vol. 14, p. 42.
K. Schwerdtfeger: Heat withdrawal in continuous casting of steel, in: A.W. Cramb (Ed.), The Making Shaping and Treating of Steel-Casting Volume, 11th ed., AISE Steel Foundation, Pittsburgh, 2003, pp. 12.
J. Savage and W.H. Pritchard: J. Iron Steel Inst., 1954, vol. 178, pp. 269–77.
J.K. Brimacombe: Can. Metall. Q., 1976, vol. 15, pp. 163–75.
M.M. Wolf: Process Technol., 1995, vol. 13, pp. 99–117.
H.L. Gilles: Development of thermal solidification models for Bethlehem’s slab casters, 76 th Steelmaking Conference, 1993, pp. 315–29.
M. Janik and H. Dyja: J. Mater. Process. Technol., 2004, vol. 157, pp. 177–82.
M. Alizadeh, A. J. Jahromi, and O. Abouali: Comput. Mater. Sci., 2008, vol. 44. pp. 807–12.
M. Hanao, M. Kawamoto, and A. Yamanaka: ISIJ Int., 2012. vol. 52, pp. 1310–19.
Y. Meng and B.G. Thomas: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 685–705.
X. Xie, D. Chen, H. Long, M. Long, and K. Lv: Metall. Mater. Trans. B, 2014, vol. 45B, pp. 2442-52. DOI: 10.1007/s11663-014-0127-7.
T. Kimura, M. Koyama, and T. Mannaka, Method for controlling plate material hot rolling equipment. U.S. Patent 5,113,678, 1992.
P.E.R. Lopez, K.C. Mills, P.D. Lee, and B. Santillana: Metall. Mater. Trans. B, 2012, 43B. pp. 109–122.
H. Zhang, W. Wang, D. Zhou, F. Ma, B. Lu, and L. Zhou: Metall. Mater. Trans. B, 2014, 45B, pp. 1038–47.
N. Tikhonov and V.Y. Arsenin: Solutions of ill-Posed Problems. Wiley, Hoboken, 1977.
H.R. Orlande: J. Heat Transf., 2012, 134. pp. 031011.
O.M. Alifanov: Inverse Heat Transfer Problems. Springer, Berlin, 1994.
J.V. Beck: Inverse Heat Conduction: Ill-Posed Problems, Wiley, Mississauga, 1985.
C.A.M. Pinheiro, I.V. Samarasekera, J.K. Brimacomb, and B.N. Walker: Ironmak. Steelmak., 2000, 27, pp. 37–54.
G. Blanc, M. Raynaud, and T.H. Chau: Revue générale de thermique, 1998, 37, pp. 17–30.
X. Wang, L. Tang, X. Zang, and M. Yao: J. Mater. Process. Technol., 2012, 212, pp. 1811–18.
H. Yin and M. Yao: J. Mater. Process. Technol., 2007, 183, pp. 49–56.
J.V. Beck, B. Blackwell, and A. Haji-Sheikh: Int. J. Heat and Mass Transf., 1996, 39, pp. 3649–57.
J.V. Beck, B. Litkouhi, and C.S. Clair Jr: Numer. Heat Transf. Part A Appl., 1982, 5, pp. 275–86.
E.Y. Ko, J. Choi, J.Y. Park, and I. Sohn: Metals and Mater. Int., 2014, 20, pp. 141–51.
A. Badri, T. T. Natarajan, C. C. Snyder, K. D. Powers, F. J. Mannion, and A. W. Cramb: Metall. Mater. Trans. B, 2005, 36B, pp. 355–71.
C.H. Huang and W.C. Chen: Int. J. Heat and Mass Transf., 2000, 43, pp. 3171–81.
C.H. Huang and H.C. Lo: Numer. Heat Transf. Part A: Appl., 2005, 48, pp. 1009–34.
H.T. Chen and W.L. Hsu: Int. J. Heat and Mass Transf., 2007, 50, pp. 1750–1761.
A.K. Parwani, P. Talukdar, and P.M.V. Subbarao: Int. J. Numer. Methods for Heat & Fluid Flow, 2014, 24, pp. 522–44.
F.B. Liu and M.N. Ozisik: Int. J. Heat and Mass Transf., 1996, 39, pp. 2615–18.
M.N. Ozisik: Inverse Heat Transfer: Fundamentals and Applications. CRC Press, Boca Raton, 2000.
Y. Dai and N. Qin: J. Comput. Math. Int. Ed., 2003, 21, pp. 311–20.
V.A Morozov and Z. Nashed: Methods for Solving Incorrectly Posed Problems, Springer, New York, 1984.
D. Zhou, W. Wang, H. Zhang, F. Ma, K. Chen, and L. Zhou: Metall. Mater. Trans. B, 2014, 45B, pp. 1048–56.
C.H. Huang and S.P. Wang: Int. J. Heat and Mass Transf., 1999, 42, pp. 3387–403.