The drillability assessment of rocks using the different brittleness values

Adamson, W.R., 1984. Correlation of Model Excavating Machine Performance with Rock Properties and Rotary Drilling Performance Data, MSc. Thesis, Univ. of Queensland. Altindag, R., 2000. The role of brittleness on the analysis of percussive drilling performance. In: Proc. of 5th Turkish National Rock Mech. Symp., pp. 105–112. Altindag, 2002, The evaluation of rock brittleness concept on rotary blasthole drills, J. S. Afr. Inst. Min. Metall., 102, 61 Altindag, 2003, Correlation of specific energy with rock brittleness concept on rock cutting, J. S. Afr. Inst. Min. Metall., 103, 163 Bamford, W.E., 1984. Rock test indices are being successfully correlated with tunnel boring machine performance. In: Proceedings, Fifth Australian Tunnelling Conference, pp. 218–221. Bieniawski, 2007, Predicting TBM excavation, Tunnels Tunnell. Int., 25, 28 Bilgin, N., Kahraman, S., 2003. Drillability prediction in rotary blast hole drilling. In: Proc. 18th Int. Mining Cong. and Exhibition of Turkey, Antalya, Turkey, pp. 177–182. Blindheim, O.T., Grov, E., Nilsen, B., 2002. The effect of mixed face conditions (MFC) on hard rock TBM performance. In: AITES-ITA Word Tunnel Congress, Sydney, pp. 24–32. Bruland, A., 1988. Hard Rock Tunnel Boring, Advance Rate and Cutter Wear, vol. 3 of this Thesis, Norwegian University of Science and Technology, Trondheim, pp. 13–32. Dahl, F., 2003. DRI, BWI, CLI Standards, NTNU, Angleggsdrift, Trondheim, Norway. Dahl, 2007, Development of a new direct test method for estimating cutter life, based on the Sievers’ J miniature drill test, Tunnell. Undergr. Space Technol., 22, 106, 10.1016/j.tust.2006.03.001 Evans, 1966 Farmer, 1980, Mechanics of disc cutter penetration, Tunnels Tunnell., 12, 22 Fish, 1968, The basic variables in rotary drilling, Mine Quarry Eng., 27, 74 Genis, 2007, Engineering geological appraisal of the rock masses and preliminary support design, Dorukan Tunnel, Zonguldak, Turkey, Eng. Geol., 92, 14, 10.1016/j.enggeo.2007.02.005 Göktan, 1991, Brittleness and micro-scale rock cutting efficiency, Min. Sci. Technol., 13, 237, 10.1016/0167-9031(91)90339-E Graham, P.C., 1976. Rock exploration for machine manufactures. In: Proceedings, Symposium on Exploration For Rock Engineering, Johannesburg, Rotterdam, Balkema, pp. 173–180. Grima, 2000, Modelling tunnel boring machine performance by neuron-fuzzy methods, Tunnell. Undergr. Space Technol., 15, 259, 10.1016/S0886-7798(00)00055-9 Hetenyi, M., 1966. Handbook of Experimental Stress Analysis, New York. Howarth, 1987, Quantitative assessment of rock texture and correlation with drillability and strength properties, Rock Mech. Rock Eng., 20, 57, 10.1007/BF01019511 Howarth, 1986, Correlation of model tunnel boring and drilling machine performances with rock properties, Int. J. Rock Mech. Min. Sci., 23, 171, 10.1016/0148-9062(86)90344-X Hucka, 1974, Brittleness determination of rocks by different methods, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 11, 389, 10.1016/0148-9062(74)91109-7 Hucka, 1975, Laboratory investigations of penetration of complete coal series, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 12, 213, 10.1016/0148-9062(75)90355-1 Innaurato, N., Mancini, R., Rondena, E., Zaninetti, A., 1991. Forecasting and effective TBM performances in rapid excavation of a tunnel in Italy. In: 7th Int. Congress uber Felsmecanik, Aachen, Deutschland, pp. 985–990. Kahraman, 1999, Rotary and percussive drilling prediction using regression analysis, Int. J. Rock Mech. Min. Sci., 36, 981, 10.1016/S0148-9062(99)00050-9 Kahraman, 2002, Correlation of TBM and drilling machine performances with rock brittleness, Eng. Geol., 65, 269, 10.1016/S0013-7952(01)00137-5 Kahraman, 2003, Performance analysis of drilling machines using rock modulus ratio, J. S. Afr. Inst. Min. Metall., 103, 515 Kahraman, 2004, A brittleness index to estimate fracture toughness, Int. J. Rock Mech. Min. Sci., 41, 343, 10.1016/j.ijrmms.2003.07.010 Kahraman, S., Bilgin, N., 2007. Performance prediction of rotary blast hole drills from load-indentation curves. In: 5th Int. Conference Mining Techniques, Krynica, Poland, pp. 11–117. Kahraman, 2000, Prediction of the penetration rate of rotary blast hole drills using a new drillability index, Int. J. Rock Mech. Min. Sci., 37, 729, 10.1016/S1365-1609(00)00007-1 Kahraman, 2003, Dominant rock properties affecting the penetration rate of percussive drills, Int. J. Rock Mech. Min. Sci., 40, 711, 10.1016/S1365-1609(03)00063-7 Karpuz, 1990, Drillability studies on the rotary blast hole drilling of lignite overburden series, Int. J. Surf. Min. Recl., 4, 89, 10.1080/09208119008944172 McFeat-Smith, I., Fowell, R.J., 1977. Correlation of rock properties and the cutting performance of tunnelling machines. In: Proceedings of Conference on Rock Engineering, Newcastle Upon Tyne, pp. 581–602. McFeat-Smith, 1979, Assessment of tunnel boring performance, Tunnels Tunnell., 33, 37 Morley, 1944 Nelson, 1985, TBM performance prediction using rock fracture parameters, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 22, 189, 10.1016/0148-9062(85)93234-6 Nilsen, B., 2003. Investigation and testing for Norwegian hard rock TBM performance prediction, Türkiye Yeraltı Kaynaklarının Bugünü ve Geleceği, İTÜ Maden Fakültesi 50. Yıl Sempozyumu Kitabı, İstanbul, pp. 89–96. NTH – Anleggsdrift, 1994. Hard Rock Tunnel Boring, Norwegian Institute of Technology, Dept. of Civil and Transport Engineering, Project Report 1-94. NTNU – Anleggsdrift, 1998. Hard Rock Tunnel Boring, Norwegian University of Science and Technology, Dept. of Civil and Transport Engineering, Report 1B-98. Obert, 1967 Ozdemir, L., Miller, R., Wang, F.D., 1978. Mechanical Tunnel Boring Prediction and Machine Design, Final Project Report to NSF APR73-07776-A03., Golden, Co., Colorado School of Mines, USA. Pandey, 1991, An investigation into rock drilling, Int. J. Surf. Min. Recl., 5, 139 Paone, J., Madson, D., Bruce, W.E., 1969. Drillability Studies – Laboratory Percussive Drilling, US Bureau of Mines RI 7300. Pathinkar, 1980, Drillability of rocks in percussive drilling from ‘energy per unit volume as determined with a microbit, Min. Eng., 32, 1407 Protodyakonov, M.M., 1962. Mechanical properties and drillability of rocks. In: Proc 5th Symp. on Rock Mech., Univ. Minnesota, pp. 103–118. Rabia, H., Brook, N., 1980. An empirical equation for drill performance prediction. In: The State of the Arts in Rock Mechanics, Proc. 21st U.S. Symp. on Rock Mech., Univ. of Missouri-Rolla, pp. 103–111. Rabia, 1981, The Effects of apparatus size and surface area of charge on the impact strength of rock, Int. J. Rock Mech. Min. Sci., 18, 211, 10.1016/0148-9062(81)90975-X Ramsay, 1967 Roxborough, F.F., 1985. Research in mechanical rock excavation: progress and prospects. In: Proc. Rapid Excavation and Tunnelling Conference, New York, USA, pp. 225–244. Roxborough, 1975, Rock excavation by disc cutter, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 12, 361, 10.1016/0148-9062(75)90547-1 Schmidt, R.L., 1972. Drillability Studies – Percussive Drilling in the Field, US Bureau of Mines RI 7684. Selim, A.A., Bruce, W.E., 1970. Prediction of Penetration Rate for Percussive Drilling, US Bureau of Mines RI 7396. Selmer-Olsen, R., Blindheim, O.T., 1970. On the drillability of rock by percussive drilling. In: Proc. 2nd Congress Int. Soc. Rock Mech., pp. 65–70. Selmer-Olsen, R., Lien, R., 1960. Bergartens borbarhet og sprengbarhet, Teknisk Ukeblad, 34, Oslo, pp. 3–11. Sievers, H., 1950. Die bestimmung des bohrwiderstandes von geesteinen. Glückauf, 37/38, pp. 776–784. Singh, D.P., 1969. Drillability and physical properties of rocks. In: Proc. Rock Mech. Symp., University of Sydney, pp. 29–34. Singh, 1986, Brittleness and the mechanical winning of coal, Min. Sci. Technol., 3, 173, 10.1016/S0167-9031(86)90305-1 Singh, 1987, Criterion for the assessment of the cuttability of coal, Undergr. Min. Methods Technol., 8, 225, 10.1016/B978-0-444-42845-5.50024-3 Sundin, N., Wanstedt, S., 1994. A boreability model for tbm’s. In: Proc. First North American Rock Mechanics Symposium, Austin, pp. 311–318. Tamrock, 1998. Surface Drilling and Blasting, Finland. Tandanand, S., Unger, H.F., 1975. Drillability Determination – A Drillability Index of Percussive Drills, US Bureau of Mines RI 8073. Tarkoy, P.J., 1973. Predicting tbm penetration rates in selected rock types. In: Proc. Ninth Canadian Rock Mechanics Symposium, pp. 116–132. Tarkoy, P.J., Hendron, A.J., 1975. Rock Hardness Index Properties and Geotechnical Parameters for Predicting Tunnel Boring Machine Performance, Report Prepared for NSF, Pb-246-293, Dept. of Civil Eng., Univ. of Illinois at Urbana Champaign, Urbana, Il 61820. Thuro, K., Spaun, G., 1996. Introducing the ‘destruction work as a new rock property of toughness referring to drillability in conventional drill and blast tunnelling. In: Eurock’96 Prediction and Performance in Rock Mechanics and Rock Engineering, vol. 2, pp. 707–713. Von Matern, N., Hjelmer, A., 1963. Forsok med Pagrus, Statens Vaginstitut, Medelande, Stockholm. Yagiz, 2009, Assessment of brittleness using rock strength and density with punch penetration test, Tunnell. Undergr. Space Technol., 24, 66, 10.1016/j.tust.2008.04.002