Potassium salt-assisted synthesis of highly microporous carbon spheres for CO2 adsorption

ICPP, Climate change 2014: mitigation of climate change. Working group III contribution to the IPCC 5th assessment report (final draft, 17.12.13). Houghton, 2001 Markewitz, 2012, Worldwide innovations in the development of carbon capture technologies and the utilization of CO2, Energy Environ Sci, 5, 7281, 10.1039/c2ee03403d Aresta, 2014, Catalysis for the valorization of exhaust carbon: from CO2 to chemicals, materials, and fuels. Technological use of CO2, Chem Rev, 114, 1709, 10.1021/cr4002758 Goeppert, 2014, Recycling of carbon dioxide to methanol and derived products – closing the loop, Chem Soc Rev, 43, 7995, 10.1039/C4CS00122B Lee, 2012, Post-combustion carbon dioxide capture: evolution towards utilization of nanomaterials, Renew Sustain Energy Rev, 16, 2599, 10.1016/j.rser.2012.01.077 Liu, 2012, Progress in adsorption-based CO2 capture by metal-organic frameworks, Chem Soc Rev, 41, 2308, 10.1039/C1CS15221A Patel, 2012, High capacity carbon dioxide adsorption by inexpensive covalent organic polymers, J Mater Chem, 22, 8431, 10.1039/c2jm30761h Su, 2012, CO2 capture from gas stream by zeolite 13× using a dual-column temperature/vacuum swing adsorption, Energy Environ Sci, 5, 9021, 10.1039/c2ee22647b Heydari-Gorji, 2011, Polyethylenimine-impregnated mesoporous silica: effect of amine loading and surface alkyl chains on CO2 adsorption, Langmuir, 27, 12411, 10.1021/la202972t De Canck, 2013, Periodic mesoporous organosilicas functionalized with a wide variety of amines for CO2 adsorption, Phys Chem Chem Phys, 15, 9792, 10.1039/c3cp50393c Hornbostel, 2013, Characteristics of an advanced carbon sorbent for CO2 capture, Carbon, 56, 77, 10.1016/j.carbon.2012.12.082 Seredych, 2014, Complexity of CO2 adsorption on nanoporous sulfur-doped carbons – is surface chemistry an important factor?, Carbon, 74, 207, 10.1016/j.carbon.2014.03.024 Xu, 2013, Nitrogen-doped porous carbon simply prepared by pyrolyzing a nitrogen-containing organic salt for supercapacitors, Electrochim Acta, 98, 176, 10.1016/j.electacta.2013.03.053 Hines, 2004, Surface properties of porous carbon obtained from polystyrene sulfonic acid-based organic salts, Langmuir, 20, 3388, 10.1021/la0360613 Atkinson, 2012, Preparing microporous carbon from solid organic salt precursors using in situ templating and a fixed-bed reactor, Microporous Mesoporous Mater, 160, 174, 10.1016/j.micromeso.2012.05.008 Sevilla, 2013, A general and facile synthesis strategy towards highly porous carbons: carbonization of organic salts, J Mater Chem A, 1, 13738, 10.1039/c3ta13149a Adeniran, 2014, A family of microporous carbons prepared via a simple metal salt carbonization route with high selectivity for exceptional gravimetric and volumetric post-combustion CO2 capture, J Mater Chem A, 2, 14696, 10.1039/C4TA03565H Gorka, 2011, Hierarchically porous phenolic resin-based carbons obtained by block copolymer-colloidal silica templating and post-synthesis activation with carbon dioxide and water vapor, Carbon, 49, 154, 10.1016/j.carbon.2010.08.055 de Souza, 2013, Enhancement of CO2 adsorption on phenolic resin-based mesoporous carbons by KOH activation, Carbon, 65, 334, 10.1016/j.carbon.2013.08.034 Wickramaratne, 2013, Activated carbon spheres for CO2 adsorption, ACS Appl Mater Interfaces, 5, 1849, 10.1021/am400112m Wickramaratne, 2013, Importance of small micropores in CO2 capture by phenolic resin-based activated carbon spheres, J Mater Chem A, 1, 112, 10.1039/C2TA00388K Pablo Marco-Lozar, 2014, Sorbent design for CO2 capture under different flue gas conditions, Carbon, 72, 125, 10.1016/j.carbon.2014.01.064 Lee, 2013, Determination of the optimal pore size for improved CO2 adsorption in activated carbon fibers, J Colloid Interface Sci, 389, 230, 10.1016/j.jcis.2012.09.018 Casco, 2014, Effect of the porous structure in carbon materials for CO2 capture at atmospheric and high-pressure, Carbon, 67, 230, 10.1016/j.carbon.2013.09.086 Sevilla, 2011, Sustainable porous carbons with a superior performance for CO2 capture, Energy Environ Sci, 4, 1765, 10.1039/c0ee00784f Mestre, 2014, High performance microspherical activated carbons for methane storage and landfill gas or biogas upgrade, J Mater Chem A, 2, 15337, 10.1039/C4TA03242J Chen, 2013, Process optimization of K2C2O4-activated carbon from kenaf core using Box-Behnken design, Chem Eng Res Des, 91, 1783, 10.1016/j.cherd.2013.02.024 Liu, 2011, Extension of the Stöber method to the preparation of monodisperse resorcinol-formaldehyde resin polymer and carbon spheres, Angew Chem Int Ed, 50, 5947, 10.1002/anie.201102011 Brunauer, 1938, Adsorption of gases in multimolecular layers, J Am Chem Soc, 60, 309, 10.1021/ja01269a023 Kruk, 2001, Gas adsorption characterization of ordered organic–inorganic nanocomposite materials, Chem Mater, 13, 3169, 10.1021/cm0101069 Jagiello, 2013, 2D-NLDFT adsorption models for carbon slit-shaped pores with surface energetical heterogeneity and geometrical corrugation, Carbon, 55, 70, 10.1016/j.carbon.2012.12.011 Jagiello, 2013, Carbon slit pore model incorporating surface energetical heterogeneity and geometrical corrugation, Adsorption, 19, 777, 10.1007/s10450-013-9517-4 Myers, 2002, Thermodynamics of adsorption in porous materials, AIChE J, 48, 145, 10.1002/aic.690480115 Al-Muhtaseb, 2003, Preparation and properties of resorcinol-formaldehyde organic and carbon gels, Adv Mater, 15, 101, 10.1002/adma.200390020 Romero-Anaya, 2014, Spherical carbons: synthesis, characterization and activation processes, Carbon, 68, 296, 10.1016/j.carbon.2013.11.006 Zhu, 2014, Nitrogen-enriched and hierarchically porous carbon macro-spheres – ideal for large-scale CO2 capture, J Mater Chem A, 2, 5481, 10.1039/C4TA00438H Sing, 1985, Reporting physisorption data for gas solid systems with special reference to the determination of surface-area and porosity, Pure Appl Chem, 57, 603, 10.1351/pac198557040603 Gergova, 1996, Effects of activation method on the pore structure of activated carbons from apricot stones, Carbon, 34, 879, 10.1016/0008-6223(96)00028-0 Teng, 2000, Preparation of porous carbons from phenol-formaldehyde resins with chemical and physical activation, Carbon, 38, 817, 10.1016/S0008-6223(99)00160-8 Ahmadpour, 1997, The preparation of activated carbon from macadamia nutshell by chemical activation, Carbon, 35, 1723, 10.1016/S0008-6223(97)00127-9 Nakagawa, 2007, Modification of the porous structure along the preparation of activated carbon monoliths with H3PO4 and ZnCl2, Microporous Mesoporous Mater, 103, 29, 10.1016/j.micromeso.2007.01.029 Kicinski, 2014, Heteroatom-doped carbon gels from phenols and heterocyclic aldehydes: sulfur-doped carbon xerogels, Carbon, 75, 56, 10.1016/j.carbon.2014.02.085 Wang, 2013, Highly porous nitrogen-doped polyimine-based carbons with adjustable microstructures for CO2 capture, J Mater Chem A, 1, 10951, 10.1039/c3ta11995e Jin, 2013, Carbon nanotube modified carbon composite monoliths as superior adsorbents for carbon dioxide capture, Energy Environ Sci, 6, 2591, 10.1039/c3ee24441e Merkel, 2010, Power plant post-combustion carbon dioxide capture: an opportunity for membranes, J Membr Sci, 359, 126, 10.1016/j.memsci.2009.10.041 Samanta, 2012, Post-combustion CO2 capture using solid sorbents: a review, Ind Eng Chem Res, 51, 1438, 10.1021/ie200686q Ben, 2012, Selective adsorption of carbon dioxide by carbonized porous aromatic framework (PAF), Energy Environ Sci, 5, 8370, 10.1039/c2ee21935b Himeno, 2005, High-pressure adsorption equilibria of methane and carbon dioxide on several activated carbons, J Chem Eng Data, 50, 369, 10.1021/je049786x Suarez-Garcia, 2012, Porosity development in carbon nanofibers by physical and chemical activation, J Nano Res, 17, 211, 10.4028/www.scientific.net/JNanoR.17.211