Buckling and free vibration of a side-cracked Mindlin plate under axial in-plane load
Tóm tắt
In this paper, the buckling and free vibration of a Mindlin plate with a side crack are presented considering a uniaxial in-plane compressive or tensile load. The side crack is through the thickness of the plate. In the Ritz method, a series of corner functions are incorporated into the admissible functions which consist of the modified characteristic functions. With this treatment, one can describe the singularity in stress near the tip of the crack as well as the discontinuities in both displacement and bending rotations across the crack. The buckling loads and natural frequencies are solved through eigenvalue problems considering the existence of the crack. The effects of location, length and orientation of the crack on the buckling and free vibration of the loaded plate are demonstrated. The coupling effect of the crack and the in-plane load on the vibrational characteristics of the plate is analyzed with varying parameters. It is shown that the influences of the tensile and compressive preloads are enhanced by the crack, and the tensile preload can cause the low-order frequency to increase with the growing crack.
Tài liệu tham khảo
Reddy, J.N.: Theory and Analysis of Elastic Plates and Shells, 2nd edn. CRC Press, New York (2006)
Talebitooti, R., Johari, V., Zarastvand, M.: Wave transmission across laminated composite plate in the subsonic flow investigating two-variable refined plate theory. Lat. Am. J. Solids Struct. (2018). https://doi.org/10.1590/1679-78254352
Talebitooti, R., Zarastvand, M., Rouhani, A.S.: Investigating hyperbolic shear deformation theory on vibroacoustic behavior of the infinite functionally graded thick plate. Lat. Am. J. Solids Struct. 16, 1–17 (2019)
Stahl, B., Keer, L.M.: Vibration and stability of cracked rectangular plates. Int. J. Solids Struct. 8(1), 69–91 (1972)
Aggarwala, B.D., Ariel, P.D.: Vibration and bending of a cracked plate. Rozpr. Inzynierskie 29(2), 295–310 (1981)
Neku, K.: Free vibration of a simply-supported rectangular plate with a straight through-notch. Bull. Jpn. Soc. Mech. Eng. 25(199), 16–23 (1982)
Solecki, R.: Bending vibration of a simply supported rectangular plate with a crack parallel to one edge. Eng. Fract. Mech. 18(6), 1111–1118 (1983)
Qian, G.L., Gu, S.N., Jiang, J.S.: A finite element model of cracked plates and application to vibration problems. Comput. Struct. 39(5), 483–487 (1991)
Krawczuk, M.: Natural vibrations of rectangular plates with a through crack. Arch. Appl. Mech. 63, 491–504 (1993)
Bachene, M., Tiberkak, R., Rechak, S.: Vibration analysis of cracked plates using the extended finite element method. Arch. Appl. Mech. 79(3), 249–262 (2009)
Yu, T., Bui, T.Q., Liu, P., Hirose, S.: A stabilized discrete shear gap extended finite element for the analysis of cracked Reissner–Mindlin plate vibration problems involving distorted meshes. Int. J. Mech. Mater. Des. 12(1), 85–107 (2016)
Yuan, J., Dickinson, S.M.: The flexural vibration of rectangular plate systems approached by using artificial springs in the Rayleigh–Ritz method. J. Sound. Vib. 159(1), 39–55 (1992)
Liew, K.M., Hung, K.C., Lim, M.K.: A solution method for analysis of cracked plates under vibration. Eng. Fract. Mech. 48(3), 393–404 (1994)
Khadem, S.E., Rezaee, M.: Introduction of modified comparison functions for vibration analysis of a rectangular cracked plate. J. Sound Vib. 236(2), 245–58 (2000)
Huang, C.S., Leissa, A.W.: Vibration analysis of rectangular plates with side cracks via the Ritz method. J. Sound Vib. 323(3–5), 974–988 (2009)
Xue, J., Wang, Y.: Free vibration analysis of a flat stiffened plate with side crack through the Ritz method. Arch. Appl. Mech. 89, 2089–2102 (2019)
Kumar, Y.: The Rayleigh–Ritz method for linear dynamic, static and buckling behavior of beams, shells and plates: a literature review. J. Vib. Control 24(7), 1205–27 (2018)
Zeng, H.C., Huang, C.S., Leissa, A.W., Chang, M.J.: Vibrations and stability of a loaded side-cracked rectangular plate via the MLS-Ritz method. Thin-Walled Struct. 106, 459–470 (2016)
Moreno-García, P., dos Santos, J.V.A., Lopes, H.: A review and study on Ritz method admissible functions with emphasis on buckling and free vibration of isotropic and anisotropic beams and plates. Arch. Comput. Methods Eng. 25, 785 (2018)
Gartner, J.R., Olgac, N.: Improved numerical computation of uniform beam characteristic values and characteristic functions. J. Sound Vib. 84, 481–489 (1982)
Huang, C.S., Leissa, A.W., Li, R.S.: Accurate vibration analysis of thick, cracked rectangular plates. J. Sound Vib. 330, 2079–2093 (2011)
Yang, G., Hu, D., Han, X., Ma, G.: An extended edge-based smoothed discrete shear gap method for free vibration analysis of cracked Reissner–Mindlin plate. Appl. Math. Model. 51, 477–504 (2017)
Nayfeh, A.H., Pai, P.F.: Linear and Nonlinear Structural Mechanics. Wiley, New York (2004)
Talebitooti, R., Zarastvand, M.R.: The effect of nature of porous material on diffuse field acoustic transmission of the sandwich aerospace composite doubly curved shell. Aerosp. Sci. Technol. 78, 157–170 (2018)
Talebitooti, R., Zarastvand, M.R., Gohari, H.D.: Investigation of power transmission across laminated composite doubly curved shell in the presence of external flow considering shear deformation shallow shell theory. J. Vib. Control 24, 4492–4504 (2018)
Darvish Gohari, H., Zarastvand, M.R., Talebitooti, R.: Acoustic performance prediction of a multilayered finite cylinder equipped with porous foam media. J. Vib. Control (2020). https://doi.org/10.1177/1077546319890025
Reissner, E.: The effect of transverse shear deformation on the bending of elastic plates. J Appl. Mech. 12, 69–77 (1945)
Mindlin, R.D.: Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates. J. Appl. Mech. 18, 31–8 (1951)
Moradi, S., Makvandi, H., Poorveis, D., Shirazi, K.H.: Free vibration analysis of cracked postbuckled plate. Appl. Math. Model. 66, 611–627 (2019)